Last interglacial climates of south-eastern Australia: plant and beetle-based reconstructions from Yarra Creek,King Island,Tasmania

This paper explores the palaeoclimatic significance of a fossil plant and insect record from Yarra Creek, on King Island, between Tasmania and the Australian mainland. The record dates, based upon a thermoluminescence chronology and other evidence, to Marine Isotope Stage 5 (MIS 5); the exact timing is impossible to ascertain given the resolution of the thermoluminescence results and the presence of an unconformity in the dated section. The presence of a cool-temperate rainforest flora, outside its modern range, and other independent evidence, suggest the sequence may represent the last interglacial (MIS 5e) rather than a later MIS 5 substage. Using coexistence methods that compare modern climatic ranges of the taxa in the assemblage we reconstruct independent beetle and plant based annual and seasonal temperate and precipitation parameters. The results imply the assemblage was deposited under a wetter summer climate and suggest conditions of enhanced temperature seasonality. It is probable that enhanced temperature seasonality is a methodological artefact reflecting the rarity of extremely equable climates (like King Island) in modern climate space. This would indicate a limitation of most methods of palaeoclimatic reconstruction that rely on modern datasets – it is only possible to reconstruct past climates as being within the range of values in that currently exist in modern climate space.     

Environmental correlates of large-scale spatial variation in the δ13C of marine animals

Carbon stable isotopes can be used to trace the sources of energy supporting food chains and to estimate the contribution of different sources to a consumer's diet. However, the δ¹³C signature of a consumer is not sufficient to infer source without an appropriate isotopic baseline, because there is no way to determine if differences in consumer δ¹³C reflect source changes or baseline variation. Describing isotopic baselines is a considerable challenge when applying stable isotope techniques at large spatial scales and/or to interconnected food chains in open marine environments. One approach is to use filter-feeding consumers to integrate the high frequency and small-scale variation in the isotopic signature of phytoplankton and provide a surrogate baseline, but it can be difficult to sample a single consumer species at large spatial scales owing to rarity and/or discontinuous distribution. Here, we use the isotopic signature of a widely distributed filter-feeder (the queen scallop Aequipecten opercularis) in the north-eastern Atlantic to develop a model linking base δ¹³C to environmental variables. Remarkably, a single variable model based on bottom temperature has good predictive power and predicts scallop δ¹³C with mean error of only 0.6‰ (3%). When the model was used to predict an isotopic baseline in parts of the overall study region where scallop were not consistently sampled, the model accounted for 76% and 79% of the large-scale spatial variability (10¹–10⁴ km) of the δ¹³C of two fish species (dab Limanda limanda and whiting Merlangus merlangius) and 44% of the δ¹³C variability in a mixed fish community. The results show that source studies would be significantly biased if a single baseline were applied to food webs at larger scales. Further, when baseline δ¹³C cannot be directly measured, a calculated baseline value can eliminate a large proportion of the unexplained variation in δ¹³C at higher trophic levels.     

A Fixed-point Scheme for the Numerical Construction of Magnetohydrostatic Atmospheres in Three Dimensions

Magnetohydrostatic models of the solar atmosphere are often based on idealized analytic solutions because the underlying equations are too difficult to solve in full generality. Numerical approaches, too, are often limited in scope and have tended to focus on the two-dimensional problem. In this article we develop a numerical method for solving the nonlinear magnetohydrostatic equations in three dimensions. Our method is a fixed-point iteration scheme that extends the method of Grad and Rubin (Proc. 2nd Int. Conf. on Peaceful Uses of Atomic Energy 31, 190, 1958) to include a finite gravity force. We apply the method to a test case to demonstrate the method in general and our implementation in code in particular.     

Shock‐induced changes in density and porosity in shock‐metamorphosed crystalline rocks,Haughton impact structure,Canada

Abstract– Shock metamorphism can occur at transient pressures that reach tens of GPa and well over 1000 °C, altering the target material on both megascopic and microscopic scales. This study explores the effects of shock metamorphism on crystalline, quartzofeldspathic basement material from the Haughton impact structure on Devon Island, Arctic Canada. Shock levels were assigned to samples based on petrographic examination of main mineral phases. Conventional shock classification schemes proved to incompletely describe the Haughton samples so a modified shock classification system is presented. Fifty‐two crystalline bedrock samples from the clast‐rich impact melt rocks in the crater, and one reference site outside of the crater, were classified using this system. The shock levels range from 0 to 7 (according to the new shock stage classification proposed here, i.e., stages 0–IV after the Stöffler classification), indicating shock pressures ranging from 0 to approximately 80 GPa. The second aspect of this study involved measuring bulk physical characteristics of the shocked samples. The bulk density, grain density, and porosity were determined using a water displacement method, a bead displacement method, and a Hepycnometer. Results suggest a nonlinear, negative correlation between density and shock level such that densities of crystalline rocks with original densities of approximately 3 g cm^?3 are reduced to <1.0 g cm^?3 at high shock levels. The results also show a positive nonlinear correlation between porosity and shock level. These data illustrate the effect of shock on the bulk physical characteristics of crystalline rocks, and has implications for assessing the habitability of shocked rocks.     

Interactive visualization of the largest radioastronomy cubes

3D visualization is an important data analysis and knowledge discovery tool, however, interactive visualization of large 3D astronomical datasets poses a challenge for many existing data visualization packages. We present a solution to interactively visualize larger-than-memory 3D astronomical data cubes by utilizing a heterogeneous cluster of CPUs and GPUs. The system partitions the data volume into smaller sub-volumes that are distributed over the rendering workstations. A GPU-based ray casting volume rendering is performed to generate images for each sub-volume, which are composited to generate the whole volume output, and returned to the user. Datasets including the HI Parkes All Sky Survey (HIPASS – 12 GB) southern sky and the Galactic All Sky Survey (GASS – 26 GB) data cubes were used to demonstrate our framework’s performance. The framework can render the GASS data cube with a maximum render time <0.3 s with 1024 × 1024 pixels output resolution using three rendering workstations and eight GPUs. Our framework will scale to visualize larger datasets, even of Terabyte order, if proper hardware infrastructure is available.     

Observations of a stationary mid-latitude cloud system on Titan

We report the observation of a cloud system on Titan that remained localized near 40°S latitude and 60°W longitude for at least 34 h. Ground-based observations obtained with the SINFONI imaging spectrograph at the Very Large Telescope over four consecutive nights recorded the lifetime and altitude of the unresolved cloud system. Concomitant measurements made by Cassini/VIMS over 3 h resolved changes in the altitude and opacity of individual regions within the system during this time. Clouds are measured from 13 to 37 km altitude with optical depths per pixel ranging from τ=0.13 to 7. Short timescale rise times are consistent with previous measurements of the evolution of mid-latitude clouds; however the long timescale localization of the cloud structure is unexplained. We speculate about the role of mesoscale circulation in relation to cloud formation.     

Correlations between VIMS and RADAR data over the surface of Titan: Implications for Titan’s surface properties

We apply a multivariate statistical method to Titan data acquired by different instruments onboard the Cassini spacecraft. We have searched through Cassini/VIMS hyperspectral cubes, selecting those data with convenient viewing geometry and that overlap with Cassini/RADAR scatterometry footprints with a comparable spatial resolution. We look for correlations between the infrared and microwave ranges the two instruments cover. Where found, the normalized backscatter cross-section obtained from the scatterometer measurement, corrected for incidence angle, and the calibrated antenna temperature measured along with the scatterometry echoes, are combined with the infrared reflectances, with estimated errors, to produce an aggregate data set, that we process using a multivariate classification method to identify homogeneous taxonomic units in the multivariate space of the samples.In medium resolution data (from 20 to 100 km/pixel), sampling relatively large portions of the satellite’s surface, we find regional geophysical units matching both the major dark and bright features seen in the optical mosaic. Given the VIMS cubes and RADAR scatterometer passes considered in this work, the largest homogeneous type is associated with the dark equatorial basins, showing similar characteristics as each other on the basis of all the considered parameters.On the other hand, the major bright features seen in these data generally do not show the same characteristics as each other. Xanadu, the largest continental feature, is as bright as the other equatorial bright features, while showing the highest backscattering coefficient of the entire satellite. Tsegihi is very bright at 5 μm but it shows a low backscattering coefficient, so it could have a low roughness on a regional scale and/or a different composition. Another well-defined region, located southwest of Xanadu beyond the Tui Regio, seems to be detached from the surrounding terrains, being bright at 2.69, 2.78 and 5 μm but having a low radar brightness. In this way, other units can be found that show correlations or anti-correlations between the scatterometric response and the spectrophotometric behavior, not evident from the optical remote sensing data.     

Precipitation of heavy metals in produced water: influence on contaminant transport and toxicity

Produced water undergoes changes in its physical chemistry including precipitation of heavy metals after being discharged and mixed with ambient seawater. Potential impacts of the precipitation of heavy metals on their transport and toxicity were studied using samples from offshore oil production sites on the Scotian Shelf off eastern Canada. Concentrations of aluminum, cadmium, chromium, cobalt, copper, iron, lead, manganese, nickel and zinc were measured in total, particulate and dissolved fractions together with Microtox tests for assessment of toxicity. Heavy metals in produced water were transformed from dissolved to particulate phase in a period of hours under oxygenated conditions, and aggregated to larger particles that settle rapidly (>100 m/day) over a few days. In addition, there was production of buoyant particles comprised of heavy metal precipitates sequestered onto oil droplets that were transported to the surface. The particulate fraction was generally more toxic than the dissolved fraction. This was evident at the mixing interface between produced water and seawater where elevated particulate and toxicity levels were observed. Laboratory studies suggest an increase in the toxicity of discharged produced water over time. Time-series experiments showed a sustained toxic response for more than a week following the oxidation of freshly discharged produced water that initially elicited little or no toxic response in the Microtox test. Chemical processes identified in this study, namely precipitation of heavy metals and consequent settling and rising fluxes of particles, will influence the toxicity, the fate and the transport of potential contaminants in the produced water. Therefore, these processes need to be considered in assessment of the environmental impact associated with offshore oil and gas operations.     

The Kabanga Ni sulfide deposit, Tanzania: I. Geology, petrography, silicate rock geochemistry, and sulfur and oxygen isotopes

The Kabanga Ni sulfide deposit represents one of the most significant Ni sulfide discoveries of the last two decades, with current indicated mineral resources of 23.23 Mt at 2.64% Ni and inferred mineral resources of 28.5 Mt at 2.7% Ni (Nov. 2008). The sulfides are hosted by a suite of ∼1.4 Ga ultramafic–mafic, sill-like, and chonolithic intrusions that form part of the approximately 500 km long Kabanga–Musongati–Kapalagulu igneous belt in Tanzania and Burundi. The igneous bodies are up to about 1 km thick and 4 km long. They crystallized from several compositionally distinct magma pulses emplaced into sulfide-bearing pelitic schists. The first magma was a siliceous high-magnesium basalt (approximately 13.3% MgO) that formed a network of fine-grained acicular-textured gabbronoritic and orthopyroxenitic sills (Mg# opx 78–88, An plag 45–88). The magma was highly enriched in incompatible trace elements (LILE, LREE) and had pronounced negative Nb and Ta anomalies and heavy O isotopic signatures (δ¹⁸O +6 to +8). These compositional features are consistent with about 20% contamination of primitive picrite with the sulfidic pelitic schists. Subsequent magma pulses were more magnesian (approximately 14–15% MgO) and less contaminated (e.g., δ¹⁸O +5.1 to +6.6). They injected into the earlier sills, resulting in the formation of medium-grained harzburgites, olivine orthopyroxenites and orthopyroxenites (Fo 83–89, Mg# _opx 86–89), and magmatic breccias consisting of gabbronorite–orthopyroxenite fragments within an olivine-rich matrix. All intrusions in the Kabanga area contain abundant sulfides (pyrrhotite, pentlandite, and minor chalcopyrite and pyrite). In the lower portions and the immediate footwall of two of the intrusions, namely Kabanga North and Kabanga Main, there occur numerous layers, lenses, and veins of massive Ni sulfides reaching a thickness of several meters. The largest amount of high grade, massive sulfide occurs in the smallest intrusion (Kabanga North). The sulfides have heavy S isotopic signatures (δ³⁴S wr = +10 to +24) that broadly overlap with those of the country rock sulfides, consistent with significant assimilation of external sulfur from the Karagwe–Ankolean sedimentary sequence. However, based partly on the relatively homogenous distribution of disseminated sulfides in many of the intrusive rocks, we propose that the Kabanga magmas reached sulfide saturation prior to final emplacement, in staging chambers or feeder conduits, followed by entrainment of the sulfides during continued magma ascent. Oxygen isotope data indicate that the mode of sulfide assimilation changed with time. The heavy δ¹⁸O ratios of the early magmas are consistent with ingestion of the sedimentary country rocks in bulk. The relatively light δ¹⁸O ratios of the later magmas indicate less bulk assimilation of the country rocks, but in addition the magmas selectively assimilated additional S, possibly through devolatization of the country rocks or through cannibalization of magmatic sulfides deposited in the conduits by preceding magma surges. The intrusions were tilted at ca. 1.37 Ga, during the Kibaran orogeny and associated synkinematic granite plutonism. This caused solid-state mobilization of ductile sulfides into shear zones, notably along the base of the intrusions where sulfide-hornfels breccias and lenses and layers of massive sulfides may reach a thickness of >10 m and can extend for several 10 s to >100 m away from the intrusions. These horizons represent an important exploration target for additional nickel sulfide deposits.