Distribution and morphology of sinkholes triggered by flooding following Tropical Storm Alberto at Albany, Georgia, USA

Flooding of the Flint River in July 1994 triggered the collapse of at least 312 sinkholes in the karstic Dougherty Plain at Albany, Georgia. We examined the distribution and morphology of these new sinkholes to evaluate the mode of formation, to characterize early stages of the evolution of sinkhole form, and to estimate the lowering of the surface associated with the development of new sinkholes.Eighty-eight percent of sinkholes occur inside the limits of flooding, especially in areas of sandy overburden, and they often follow joint-controlled linear trends. Sinkhole dimensions are log-normally distributed with median values of circumference = 5.7 m, length = 1.8 m, width = 1.6 m, and depth = 0.7 m; asymmetry (L:W) = 1.2. Cross-sectional forms range from narrow cylinders to large bowls, with many sinkholes having undercut sides.Flooding triggered the formation of sinkholes by saturating and liquefying overburden, which caused soil arches to collapse and flow into cavities in bedrock. The prevalence of sinkholes near the periphery of flooding suggests that drainage and loss of buoyant support as flood waters subsided may also have contributed to failure. A volume ratio index is used to quantify the three dimensional geometric form of sinkholes. Initially, small cylindrical shafts open over a bedrock joint, followed by progressive slumping that leads to widening and increases in volume to a final bowl form. Estimates of the aggregate volume of overburden transported underground in flooded areas range from 7,990 to 11,130 m3. Averaged over flooded areas, this accounts for 0.26 to 0.37 mm/km² lowering of the surface. Based on a 500 year recurrence interval for the flood event, values for lowering of the surface range from 0.52 to 0.74 mm per 1,000 years. These values are an order of magnitude less than estimates of carbonate dissolution and suggest that transport of overburden underground is limited by triggering events.     

Water quality impacts from mining in the Black Hills,South Dakota,USA

The focus of this research was to determine if abandoned mines constitute a major environmental hazard in the Black Hills. Many abandoned gold mines in the Black Hills contribute acid and heavy metals to streams. In some areas of sulfide mineralization local impacts are severe, but in most areas the impacts are small because most ore deposits consist of small quartz veins with few sulfides. Pegmatite mines appear to have negligible effects on water due to the insoluble nature of pegmatite minerals. Uranium mines in the southern Black Hills contribute some radioactivity to surface water, but the impact is limited because of the dry climate and lack of runoff in that area.     

A variance-ratio test for supporting a variable mean in kriging

This article discusses the issue of whether to use a variable mean and describes a test that can be used to evaluate whether it is justified to add terms to the drift (deterministic part) of a geostatistical model. The basic model could be the intrinsic one, where the deterministic part is a constant, and the alternate model could be any model that includes a constant term in the expression for the drift. Also, differences between constant- and variable-mean models are discussed.     

Geochemistry of Tertiary tholeiites and picrites from Qeqertarssuaq (Disko Island) and Nuussuaq, West Greenland with implications for the mineral potential of comagmatic intrusions

Tertiary continental flood basalts on Qeqertarssuaq and Nuussuaq in West Greenland contain ～3?km of picrites and variably contaminated tholeiites. The picrites are in the Naujánguit member of the Vaïgat Formation and they have 7–29?wt% MgO, La/Sm?=?0.9–2.1, and ¹⁴³Nd/¹⁴⁴Nd?=?0.51263–0.51307. They appear to have crystallised from high-Mg parental magmas (14.4–16.4?wt% MgO) with isotope and trace element ratios similar to recent Icelandic picrites. Discrete horizons of tholeiites, including the Asûk and?Kûgánguaq, have elevated SiO₂ (50–58 wt%), La/Sm?=?3–7, ⁸⁷Sr/⁸⁶Sr?=?0.70550–0.71224, and low ¹⁴³Nd/¹⁴⁴Nd?=?0.51234–0.51174. These lavas have low Cu and Ni abundances (typically 10–50?ppm Ni or Cu), and in the case of the Asûk on Qeqertarssuaq, they contain droplets of native iron. The low Cu and Ni contents are attributed to scavenging by magmatic sulphides formed in response to crustal contamination of picritic magmas. Two contamination trends are recognised, one to a sediment end-member with high Th/Nb and Archaean model Nd ages, and the other to a meta-igneous component with high La/Sm, low Th/Nb and Rb/Nb, and Proterozoic source ages. Overall, ²⁰⁶Pb/²⁰⁴Pb varies from 16.47–21.68. Both contamination trends are associated with low Cu and Ni, and high SiO₂, and it is argued that the magmatic sulphides were triggered by the increases in silica, rather than simply by the introduction of additional crustal-derived sulphur. Geochemically, the Asûk and Kûgánguaq rocks resemble the most contaminated Nadezhdinsky lavas of the Siberian Trap, which are widely regarded as the source of the Ni and Cu mineralisation in the giant Noril'sk deposits. Mass balance considerations indicate that the parental liquids to the contaminated magmas contained sufficient Ni, Cu, S and platinum group elements to form substantial magmatic sulphide deposits. However, unlike the lavas at Noril'sk, the contaminated (low Cu and Ni) West Greenland basalts are in isolated units with no evidence for a gradual recovery in Ni and Cu abundances with height in the lava column. Comparison with Noril'sk suggests that although significant quantities of metals were scavenged by sulphides in West Greenland, the metal contents of the sulphides may not have been upgraded by continued interaction with subsequent magma batches.     

Observations of particle movement in a monitoring well using the colloidal borescope

The colloidal borescope consists of a set of lenses and miniature video cameras capable of observing natural particles in monitoring wells. Based on field observations of these particles, it appears possible to measure in situ groundwater velocity in a well bore. Field observations have shown that directional measurements using the colloidal borescope are generally in good agreement with expected flow directions. However, the magnitude of flow velocity is higher compared with values based on conventional test methods. High relative flow velocities, even after correction factors have been applied to compensate for well bore effects, are believed to be due to preferential flow zones in the surrounding aquifer. Low flow zones exhibit swirling multidirectional flow that does not allow for a linear velocity measurement. Consequently, groundwater flow velocities measured by the colloidal borescope in heterogeneous aquifers will be biased toward the maximum velocity values present in the aquifer. A series of laboratory experiments was conducted to assess the reliability of the instrument. Based on this work, a seepage velocity correction factor ( ) of 1–4 was found for quantifying groundwater seepage velocity in the adjacent aquifer from observations in a well bore. Laboratory measurements also indicate that preferential flow in the surrounding aquifer dominates flow in the well. Results of this work suggest the possibility of quantifying higher-flow velocities associated with preferential flow zones in the subsurface.     

ELF and VLF wave generation by HF heating: A comparison of AM and CW techniques

Antenna field 2 of the Tromsø Heating facility consists of six rows of six horizontal crossed full wave dipoles aligned with the rows running geographic east-west. In previous experiments on ELF/VLF wave generation it has been the practice to feed the rows in parallel, with HF radiation amplitude modulated at the ELF/VLF frequency it was desired to radiate (AM configuration). Here we describe how the antenna array was also configured so that it could be fed with a continuous wave (CW) input power but still carry information at an ELF/VLF frequency. To effect this the three southern most rows of the antenna array were driven with a CW signal at 4.04 MHz and the three northernmost rows with a CW signal at frequency greater than 4.04 MHz by the ELF/VLF frequency it was desired to radiate (CW configuration). Experiments were performed with modulation/difference frequencies of 565 and 2005 Hz and the signals were received at the Lycksele Geophysical Observatory, 500 km south of the heating facility. The signals were typically 11 dB greater in the AM than the CW configuration, despite the fact that the average power delivered to the ionosphere in the CW configuration was four times that in the AM configuration. Significant harmonic radiation (both odd and even) was produced in the AM configuration but no harmonic radiation was detected in the CW configuration. A simple theory has been developed to model the fields produced by HF heating using the two techniques (AM,CW). A good agreement has been obtained between the experimental observations and model computations. The model has been extended to show how the relative efficiency of generation, AM/CW, varies with the frequency of the ELF/VLF radiation and HF antenna element spacing. Radiation patterns for the ‘ionospheric ELF/VLF antenna’ have also been derived for the two generation techniques.     

Large-Eddy Simulation of Turbulent Flow Over a Rough Surface

A family of wall models is proposed that exhibits moresatisfactory performance than previousmodels for the large-eddy simulation (LES) of the turbulentboundary layer over a rough surface.The time and horizontally averaged statistics such asmean vertical profiles of windvelocity, Reynolds stress, turbulent intensities, turbulentkinetic energy and alsospectra are compared with wind-tunnel experimental data.The purpose of the present study is to obtain simulatedturbulent flows that are comparable with wind-tunnelmeasurements for use as the wind environment for thenumerical prediction by LES of source dispersion in theneutral atmospheric boundary layer.