Norwegian marine geodetic projects

The hitherto promising finds of oil and gas on the Norwegian continental shelf have increased the general activity in this area considerably. Consequently, the need for better charts and more precise navigational systems have become more pertinent. During the past few years a number of marine geodetic projects have either been planned or embarked upon by various organizations within both the public and private sectors. This article gives a brief review of the Norwegian projects which have special relevance to marine geodesy; this includes the following areas: recommendations, requirements, precision navigation, satellite positioning, reference systems, boundary problems, bathymetry, geological mapping, marine geoid determination, and data base developments. The reference list will give the reader more detailed sources of information.     

Delineation of groundwater provenance in a coastal aquifer using statistical and isotopic methods,Southeast Tanzania

Rapid population growth and urbanization has placed a high demand on freshwater resources in southeast costal Tanzania. In this paper, we identify the various sources of groundwater and the major factors affecting the groundwater quality by means of multivariate statistical analyses, using chemical tracers and stable isotope signatures. The results from hierarchical cluster analyses show that the groundwater in the study area may be classified into four groups. A factor analysis indicates that groundwater composition is mainly affected by three processes, accounting for 80.6% of the total data variance: seawater intrusion, dilution of groundwater by recharge, and sewage infiltration. The hydrochemical facies of shallow groundwater was mostly of the Na–Ca–Cl type, although other water types were also observed. The deep groundwater samples were slightly to moderately mineralized and they were of the NaHCO₃ type. This water type is induced mainly by dissolution of carbonate minerals and modified by ion exchange reactions. The signal from the stable isotope composition of the groundwater samples corresponded well with the major chemical characteristics. In the shallow groundwater, both high-nitrate and high-chloride concentrations were associated with localized stable isotope enrichments which offset the meteoric isotopic signature. This is inferred to be due to the contamination by influx of sewage, as well as intrusion by seawater. The depleted stable isotope values, which coincides with a chemical signature for the deep aquifer indicates that this deep groundwater is derived from infiltration in the recharge zone followed by slow lateral percolation. This study shows that a conceptual hydrogeochemical interpretation of the results from multivariate statistical analysis (using HCA and FA) on water chemistry, including isotopic data, provides a powerful tool for classifying the sources of groundwater and identifying the significant factors governing the groundwater quality. The derived knowledge generated by this study constitutes a conceptual framework for investigating groundwater characteristics. This is a prerequisite for developing a sound management plan, which is a requirement for ensuring a sustainable exploitation of the deep aquifer water resource in the coastal area of Tanzania.     

Benthic Phosphorus Dynamics in the Gulf of Finland, Baltic Sea

Benthic fluxes of soluble reactive phosphorus (SRP) and dissolved inorganic carbon (DIC) were measured in situ using autonomous landers in the Gulf of Finland in the Baltic Sea, on four expeditions between 2002 and 2005. These measurements together with model estimates of bottom water oxygen conditions were used to compute the magnitude of the yearly integrated benthic SRP flux (also called internal phosphorus load). The yearly integrated benthic SRP flux was found to be almost 10 times larger than the external (river and land sources) phosphorus load. The average SRP flux was 1.25?±?0.56?mmol?m^?2?d^?1 on anoxic bottoms, and ?0.01?±?0.08?mmol?m^?2?d^?1 on oxic bottoms. The bottom water oxygen conditions determined whether the SRP flux was in a high or low regime, and degradation of organic matter (as estimated from benthic DIC fluxes) correlated positively with SRP fluxes on anoxic bottoms. From this correlation, we estimated a potential increase in phosphorus flux of 0.69?±?0.26?mmol?m^?2?d^?1 from presently oxic bottoms, if they would turn anoxic. An almost full annual data set of in situ bottom water oxygen measurements showed high variability of oxygen concentration. Because of this, an estimate of the time which the sediments were exposed to oxygenated overlying bottom water was computed using a coupled thermohydrodynamic ocean?Csea and ecosystem model. Total phosphorus burial rates were calculated from vertical profiles of total phosphorus in sediment and sediment accumulation rates. Recycling and burial efficiencies for phosphorus of 97 and 3%, respectively, were estimated for anoxic accumulation bottoms from a benthic mass balance, which was based on the measured effluxes and burial rates.     

Recolonisation by Macrobenthos Mobilises Organic Phosphorus from Reoxidised Baltic Sea Sediments

In recent decades, eutrophication has increased the extent of hypoxic and anoxic conditions in many coastal marine environments. In such conditions, the nutrient flux across the sediment?Cwater interface is a key process controlling the biogeochemical dynamics, and thereby the level and character of biological production. In some areas, management attempts to drive the ecosystem towards phosphorus (P) limitation, which calls for reliable knowledge on the mechanisms controlling P-cycling. We report a well-controlled laboratory experiment on benthic fluxes of P, when shifting from a state of hypoxic and azoic sediments to oxic and zoic bottom conditions. Adding any of three types of macrobenthic fauna (mysid shrimp, pontoporeid amphipod and tellinid clam) to oxygenated aquarium sections resulted in benthic P fluxes that differed consistently from the azoic control sections. All species caused liberation of dissolved organically bound P (DOP) from the sediment, in contrast to the azoic systems. The shrimp and the amphipod also resuspended the sediment, which resulted in a release of P bound to particles (>0.45???m). Dissolved inorganic phosphate (DIP) was released during hypoxic conditions, but was taken up after oxygenation, irrespective of the presence or absence of bottom fauna. In the presence of fauna, the uptake of DIP roughly equalled the release of DOP, suggesting that the benthic efflux of DOP following oxygenation and bottom fauna (re)colonisation might be considerable. This is an hitherto overlooked animal-controlled nutrient flux, which is missing from coastal marine P budgets.     

On the potential for CO2 mineral storage in continental flood basalts - PHREEQC batch- and 1D diffusion-reaction simulations

ABSTRACT: Continental flood basalts (CFB) are considered as potential CO2 storage sites because of their high reactivity and abundant divalent metal ions that can potentially trap carbon for geological timescales. Moreover, laterally extensive CFB are found in many place in the world within reasonable distances from major CO2 point emission sources.Based on the mineral and glass composition of the Columbia River Basalt (CRB) we estimated the potential of CFB to store CO2 in secondary carbonates. We simulated the system using kinetic dependent dissolution of primary basalt-minerals (pyroxene, feldspar and glass) and the local equilibrium assumption for secondary phases (weathering products). The simulations were divided into closed-system batch simulations at a constant CO2 pressure of 100?bar with sensitivity studies of temperature and reactive surface area, an evaluation of the reactivity of H2O in scCO2, and finally 1D reactive diffusion simulations giving reactivity at CO2 pressures varying from 0 to 100?bar.Although the uncertainty in reactive surface area and corresponding reaction rates are large, we have estimated the potential for CO2 mineral storage and identified factors that control the maximum extent of carbonation. The simulations showed that formation of carbonates from basalt at 40?C may be limited to the formation of siderite and possibly FeMg carbonates. Calcium was largely consumed by zeolite and oxide instead of forming carbonates. At higher temperatures (60 - 100?C), magnesite is suggested to form together with siderite and ankerite. The maximum potential of CO2 stored as solid carbonates, if CO2 is supplied to the reactions unlimited, is shown to depend on the availability of pore space as the hydration and carbonation reactions increase the solid volume and clog the pore space. For systems such as in the scCO2 phase with limited amount of water, the total carbonation potential is limited by the amount of water present for hydration of basalt.     

Effect of sub‐core scale heterogeneities on acoustic and electrical properties of a reservoir rock: a CO2 flooding experiment of brine saturated sandstone in a computed tomography scanner

The effect of sub‐core scale heterogeneity on fluid distribution pattern, and the electrical and acoustic properties of a typical reservoir rock was studied by performing drainage and imbibition flooding tests with CO₂ and brine in a laboratory. Moderately layered Rothbach sandstone was used as a test specimen. Two core samples were drilled; one perpendicular and the other parallel to the layering to allow injection of fluids along and normal to the bedding plane. During the test 3D images of fluid distribution and saturation levels were mapped by an industrial X‐ray CT‐scanner together with simultaneous measurement of electrical resistivity, ultrasonic velocities as well as amplitudes. The results showed how the layering and the flooding direction influenced the fluid distribution pattern and the saturation level of the fluids. For a given fluid saturation level, the measured changes in the acoustic and electrical parameters were affected by both the fluid distribution pattern and the layering orientation relative to the measurement direction. The P‐wave amplitude and the electrical resistivity were more sensitive to small changes in the fluid distribution patterns than the P‐wave velocity. The change in amplitude was the most affected by the orientation of the layering and the resulting fluid distribution patterns. In some instances the change due to the fluid distribution pattern was higher than the variation caused by the change in CO₂ saturation. As a result the Gassmann relation based on ‘uniform' or ‘patchy' saturation pattern was not suitable to predict the P‐wave velocity variation. Overall, the results demonstrate the importance of core‐imaging to improve our understanding of fluid distribution patterns and the associated effects on measured rock‐physics properties.     

Droplet breakup in subsea oil releases – Part 2: Predictions of droplet size distributions with and without injection of chemical dispersants

A new method for prediction of droplet size distributions from subsea oil and gas releases is presented in this paper. The method is based on experimental data obtained from oil droplet breakup experiments conducted in a new test facility at SINTEF. The facility is described in a companion paper, while this paper deals with the theoretical basis for the model and the empirical correlations used to derive the model parameters from the available data from the test facility. A major issue dealt with in this paper is the basis for extrapolation of the data to full scale (blowout) conditions. Possible contribution from factors such as buoyancy flux and gas void fraction are discussed and evaluated based on results from the DeepSpill field experiment.     

Droplet breakup in subsurface oil releases – Part 1: Experimental study of droplet breakup and effectiveness of dispersant injection

Size distribution of oil droplets formed in deep water oil and gas blowouts have strong impact on the fate of the oil in the environment. However, very limited data on droplet distributions from subsurface releases exist. The objective of this study has been to establish a laboratory facility to study droplet size versus release conditions (rates and nozzle diameters), oil properties and injection of dispersants (injection techniques and dispersant types). This paper presents this facility (6 m high, 3 m wide, containing 40 m³ of sea water) and introductory data. Injection of dispersant lowers the interfacial tension between oil and water and cause a significant reduction in droplet size. Most of this data show a good fit to existing Weber scaling equations. Some interesting deviations due to dispersant treatment are further analyzed and used to develop modified algorithms for predicting droplet sizes in a second paper (Johansen et al., 2013).     

Dark mammoth trunks in the merging galaxy NGC 1316 and a mechanism of cosmic double helices

NGC 1316 is a giant, elliptical galaxy containing a complex network of dark, dust features. The morphology of these features has been examined in some detail using a Hubble Space Telescope, Advanced Camera for Surveys image. It is found that most of the features are constituted of long filaments. There also exist a great number of dark structures protruding inwards from the filaments. Many of these structures are strikingly similar to elephant trunks in H ii regions in the Milky Way Galaxy, although much larger. The structures, termed mammoth trunks, generally are filamentary and often have shapes resembling the letters V or Y. In some of the mammoth trunks the stem of the Y can be resolved into two or more filaments, many of which showing signs of being intertwined. A model of the mammoth trunks, related to a recent theory of elephant trunks, is proposed. Based on magnetized filaments, the model is capable of giving an account of the various shapes of the mammoth trunks observed, including the twined structures.     

Characterisation of rock aggregate breakage properties using realistic texture‐based modelling

Realistic texture‐based modelling methods, that is microstructural modelling and micromechanical modelling, are developed to simulate the rock aggregate breakage properties on the basis of the rock actual microstructure obtained using microscopic observations and image analysis. The breakage properties of three types of rocks, that is Avja, LEP and Vandle taken from three quarries in Sweden, in single aggregate breakage tests and in inter‐aggregate breakage tests are then modelled using the proposed methods. The microstructural modelling directly integrates the microscopic observation, image analysis and numerical simulation together and provides a valuable tool to investigate the mechanical properties of rock aggregates on the basis of their microstructure properties. The micromechanical modelling takes the most important microstructure properties of rock aggregates into consideration and can model the major mechanical properties. Throughout this study, it is concluded that in general, the microstructure properties of rock aggregate work together to affect their mechanical properties, and it is difficult to correlate a single microstructure property with the mechanical properties of rock aggregates. In particular, for the three types of rock Avja, LEP and Vandle in this study, crack size distribution, grain size and grain perimeter (i.e. grain shape and spatial arrangement) show good correlations with the mechanical properties. The crack length and the grain size negatively affect the mechanical properties of Avja, LEP and Vandle, but the perimeter positively influences the mechanical properties. Besides, the modelled rock aggregate breakage properties in both single aggregate and inter‐aggregate tests reveal that the aggregate microstructure, aggregate shape and loading conditions influence the breakage process of rock aggregate in service. For the rock aggregate with the same microstructure, the quadratic shape and good packing dramatically improve its mechanical properties. During services, the aggregate is easiest to be fragmented under point‐to‐point loading condition, and then in the sequence of multiple‐point, point‐to‐plane and plane‐to‐plane loading conditions. Copyright © 2011 John Wiley & Sons, Ltd.