Introduction of structural aseismic research in China in recent four years

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…     

SOIL CONSERVATION EFFICIENCY OF DIFFERENT MODELS CONVERTING FROM STEEP FARMING SLOPE PLOTS IN YA''''AN, SICHUAN, CHINA

Converting farming slope land into artificial forestland or grassland is a major measure of soil/water conservation. Five conversion practices, namely, 1) a control plot still tilled with a crop (maize), 2) a folder grass-growing plot seeded with Lolium perenne , 3) a young alder tree-growing plot, 4) a pear orchard plot and 5)a bamboo plot intercropped with folder grass, were monitored to compare the soil conservation efficiency of those changes in Ya'an, Sichuan for 3 years between September 1998 and August 2001. Results showed that the 5 designed converting models functioned differently in erosion control. The most effective model was bamboo groves intercropped with folder grass (Lolium perenne). The folder grass (Lolium perenne) growing model was more effective than the pure pear orchard model. The least effective model was the young alder tree-growing slope, which was even less effective than the control (a slope without converted cultivation). Meanwhile, changes in the soil's physical properties r     

Flexural subsidence by 29 Ma on the NE edge of Tibet from the magnetostratigraphy of Linxia Basin, China

This study provides a detailed magnetostratigraphic record of subsidence in the Linxia Basin, documenting a 27 Myr long sedimentary record from the northeastern edge of the Tibetan Plateau. Deposition in the Linxia Basin began at 29 Ma and continued nearly uninterruptedly until 1.7 Ma. Increasing rates of subsidence between 29 and 6 Ma in the Linxia Basin suggest deposition in the foredeep portion of a flexural basin and constrain the timing of shortening in the northeastern margin of the plateau to Late Oligocene–Late Miocene time. By Late Miocene–Early Pliocene time, a decrease in subsidence rates in the Linxia Basin associated with thrust faulting and a 10° clockwise rotation in the basin indicates that the deformation front of the Tibetan plateau had propagated into the currently deforming region northeast of the plateau.     

Scaling effects on modeled surface energy-balance components using the NOAH-OSU land surface model

As surface exchange processes are highly non-linear and heterogeneous in space and time, it is important to know the appropriate scale for the reasonable prediction of these exchange processes. For example, the explicit representation of surface variability has been vital in predicting mesoscale weather events such as late-afternoon thunderstorms initiated by latent heat exchanges in mid-latitude regions of the continental United States. This study was undertaken to examine the effects of different spatial scales of input data on modeled fluxes, so as to better understand the resolution needed for accurate modeling. A statistical procedure was followed to select two cells from the Southern Great Plains 1997 hydrology experiment region, each 20 km×20 km, representing the most homogeneous and the most heterogeneous surface conditions (based on soil and vegetation) within the study region. The NOAH-OSU (Oregon State University) Land Surface Model (LSM) was employed to estimate surface energy fluxes. Three scales of study (200 m, 2 and 20 km) were considered in order to investigate the impacts of the aggregation of input data, especially soil and vegetation inputs, on the model output. Model results of net radiation and latent, sensible and ground heat fluxes were compared for the three scales. For the heterogeneous area, the model output at the 20-km resolution showed some differences when compared with the 200-m and 2-km resolutions. This was more pronounced in latent heat (12% decrease), sensible heat (22% increase), and ground heat flux (44% increase) estimation than in net radiation. The scaling effects were much less for the relatively homogeneous land area with 5% increase in sensible heat and 4% decrease in ground heat flux estimation. All of the model outputs for the 2- and 20-km resolutions were in close agreement. The results suggested that, for this study region, soils and vegetation input resolution of about 2 km should be chosen for realistic modeling of surface exchange processes. This resolution was sufficient to capture the effects of sub-grid scale heterogeneity, while avoiding the data and computational difficulties associated with higher spatial resolutions.     

Strong earthquake activity all over the world and strong—moderate earthquake activity within and near China（August,2002～September,2002）

Illustration All the data in this catalog are chosen from the (Preliminary Seismological Report of Chinese Seismic Stations( “Its abbreviation is "Monthly Report"). The catalog includes the events of M≥4.7 in and near China and M≥6 all over the world. The "Monthly Report" is monthly compiled by the Ninth Section of Institute of Geophysics, CSB.     

Study of Triggering Action Between the Mani （Ms7.9） and the West Kunlun Mountains Pass （ Ms 8.1 ） Great Earthquakes and Their Dynamic Background

Based on Coulomb static stress variation, the stress trigging action of the Mani ( Ms7.9, Nov.1997) earthquake on the West Kuulun Mountains Pass (MsS.1, Nov. 2001 ) earthquake is researched. Results of different source mechanism resolutions show that a 10_3 MPa Coulomb stress due to the Mani earthquake was added to the fracture fault of the Kunlun earthquake, and this may shift the broken date to about 10 years earlier, and infer that the stress level in the crust is not low. Comparing the relationship between strong earthquake strength and frequency and earth rotation change, it is shown that the strength‘s decrease and the variation period‘ s shortening of earth rotation are important controlling factors on strong earthquake activity. This great event with Ms = 8.1 took place probably due to a gradual strengthening background of regional stress field within the Qinghai-Xizang block in the period of acceleration of change of day‘s length and stress triggering from the Mani earthquake.     

Numerical simulations of deformation and movement of blocks within North China in response to 1976 Tangshan earthquake

Using methods of discontinuous deformation analysis and finite element (DDA+FEM), this paper simulates dynamic processes of the Tangshan earthquake of 1976, which occurred in the northern North China where its internal blocks apparently interacted. Studies focus upon both the movement and deformation of the blocks, in particular, the Ordos block, and variations of stress states on the boundary faults. The Tangshan earthquake was composed of three events: slipping motions of NNE-striking major fault, NE-striking fault near the northeastern end of the NNE-striking fault, and NW-striking fault on the southeastern side of the NNE-striking fault. Compared with previous studies, our model yields a result that is more agreeable with the configuration of aftershock distributions. A number of data are presented, such as the principle stress field during the earthquake, contours of the maximum shear stress, the strike-slip deformation between blocks near the earthquake focus, time-dependent variations of slips of earthquake-triggered faulting, the maximum slip distance, and stress drops. These results are in accord with the earthquake source mechanism, basic parameters from earthquake wave study, macro-isoseismic line, observed horizontal displacement vectors, etc. The Tangshan earthquake exerted different influences on the adjacent blocks and boundary faults between them, thus resulting in differential movement and deformation. The Ordos block seems to have experienced the small-scale counterclockwise rotation and deformation, but its northeast part, bounded on the east by the Taihangshan and on the north by the Yanshan and Yinshan belts, underwent relatively stronger deformation. The Tangshan earthquake also changed the stress state of boundary faults of the North China, leading to an increase in shear stress and a decrease in normal stress in the NW-trending Zhangjiakou-Penglai fault through Tangshan City and the northern border faults of the Ordos block, and therefore raises the potential risk of earthquake occurrence. This result is supported by the facts that a series of Ms ≥ 6 earthquakes took place at the northern margin of the Ordos block after the Tangshan earthquake.     

Active blocks and strong seismic activity in North China region

The active North China block consists of three second-order blocks: Ordos, North China Plain, and East Shandong-Huanghai Sea blocks. Two active tectonic zones, the Anyang-Heze-Linyi and Tangshan-Cixian zones, exist in the active North China Plain block and have separated the active block into 3 third-order active blocks, Taihangshan, Hebei-Shandong, and Henan-Huai blocks. The 3 third-order active blocks are characterized by their entire motion and are clearly different in their Cenozoic structures and deep structures. The active boundary tectonic zones between the third-order active blocks are less than those between the first- and second-order active blocks in their movement strength, extent, and seismic activity. The density of M· ·6 earthquakes in the boundary zones between active blocks is higher than that within the blocks by 9–22 times in the North China region, up to one order of magnitude on average. M· · 7 earthquakes occurred basically in the boundary zones between active blocks. The difference is not occasional, but reflects the nature of intraplate movement and the characteristics of strong seismic activity and is the powerful evidence for hypothesis of active blocks.     

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

An Efficient Numerical Method for Computing Synthetic Seismograms for a Layered Half-space with Sources and Receivers at Close or Same Depths

— It is difficult to compute synthetic seismograms for a layered half-space with sources and receivers at close to or the same depths using the generalized R/T coefficient method (Kennett, 1983; Luco and Apsel, 1983; Yao and Harkrider, 1983; Chen, 1993), because the wavenumber integration converges very slowly. A semi-analytic method for accelerating the convergence, in which part of the integration is implemented analytically, was adopted by some authors (Apsel and Luco, 1983; Hisada, 1994, 1995). In this study, based on the principle of the Repeated Averaging Method (Dahlquist and Björck, 1974; Chang, 1988), we propose an alternative, efficient, numerical method, the peak-trough averaging method (PTAM), to overcome the difficulty mentioned above. Compared with the semi-analytic method, PTAM is not only much simpler mathematically and easier to implement in practice, but also more efficient. Using numerical examples, we illustrate the validity, accuracy and efficiency of the new method.