Babbling brook to thunderous torrent: Using sound to monitor river stage

The passive, ambient sound above the water from a river has previously untapped potential for determining flow characteristics such as stage. Measuring sub-aerial sound could provide a new, efficient way to continuously monitor river stage, without the need for in-stream infrastructure. Previous published work has suggested that there might be a relationship between sound and river stage, but the analysis has been restricted to a narrow range of flow conditions and river morphologies. We present a method to determine site suitability and the process of how to record and analyse sound. Data collected along a 500 m length of the River Washburn during July 2019 is used to determine what makes a site suitable for sound monitoring. We found that sound is controlled by roughness elements in the channel, such as a boulder or weir, which influences the sound produced. On the basis of these findings, we collect audio recordings from six sites around the northeast of England, covering a range of flow conditions and different roughness elements, since 2019. We use data from those sites collected during storms Ciara and Dennis to produce a relationship between this sound and river stage. Our analysis has shown a positive relationship between an R² of 0.73 and 0.99 in all rivers, but requires careful site selection and data processing to achieve the best results. We introduce a filter that is capable of isolating a river's sound from other environmental sound. Future work in examining the role of these roughness elements is required to understand the full extent of this technique. By demonstrating that sound can operate as a hydrometric tool, we suggest that sound monitoring could be used to provide cost-effective monitoring devices, either to detect relative change in a river or, after more research, a reliable stage measurement.     

Stochastic variability in the atmospheric activity of Jupiter

The atmospheric activity of Jupiter exhibits quasi-periodic character attributed to the stochastic nature of the involved mechanisms. Periodicities between 4–33 years are obtained employing four spectrum analysis methods, (power spectrum employing the Blackman-Tukey window, maximum entropy, Fourier, autocorrelation), whilst, their significance and their stationarity has been established with the application of general statistical tests (Kolmogorov-Smirnov, one sample and two sample test, randomness test, chi-square, various orders of autoregressive process, analysis of truncated records).Deceased.     

Closed-form solution of P4P or the three-dimensional resection problem in terms of Möbius barycentric coordinates

 The perspective 4 point (P4P) problem - also called the three-dimensional resection problem - is solved by means of a new algorithm: At first the unknown Cartesian coordinates of the perspective center are computed by means of M?bius barycentric coordinates. Secondly these coordinates are represented in terms of observables, namely space angles in the five-dimensional simplex generated by the unknown point and the four known points. Substitution of M?bius barycentric coordinates leads to the unknown Cartesian coordinates (2.8)–(2.10) of Box 2.2. The unknown distances within the five-dimensional simplex are determined by solving the Grunert equations, namely by forward reduction to one algebraic equation (3.8) of order four and backward linear substitution. Tables 1.–4. contain a numerical example. Finally we give a reference to the solution of the 3 point (P3P) problem, the two-dimensional resection problem, namely to the Ansermet barycentric coordinates initiated by C.F. Gau? (1842), A. Schreiber (1908) and A.␣Ansermet (1910). Received: 05 March 1996; Accepted: 15 October 1996     

Solving the problem of shock wave attenuation in an obstacle during a contact explosion of a high-energy material charge

A problem of estimation of shock wave attenuation in an obstacle under an explosion of a high-energy material (explosive) charge on its surface is considered. An algorithm for its solution is proposed using the analytical and semiempirical dependences generally recognized in explosion physics.     

Evolution and Spectrum of the Radio Emission of Tycho’s Supernova Remnant

The radio spectrum of Tycho’s Supernova Remnant is constructed at frequencies 12.6–143 000 MHz for epoch 2010.3, taking into account the secular decrease in the radio flux density of the remnant at the rate d = ?(0.46 ± 0.03)%/year:

$$S_\nu ^{3C10} (t = 2010.3) = (43.1 \pm 1.8 Jy)(\nu [GHz])^{ - (0.592 \pm 0.019) + (0.041 \pm 0.012)\log (\nu [GHz])} .$$

The spectrum has positive curvature. The presence of a low-frequency turnover in the spectrum of the radio source 3C10 with its maximum at 7.7 MHz is predicted, due to absorption in the interstellar medium in the direction toward the source.

     

The first field-based descriptions of pumping-induced saltwater intrusion and upconing

Development of the ideas about the equilibrium between freshwater and saline water has received considerable attention in the literature, but little has been written so far about the earliest scientific works about well salinization. Based on a review of the literature from the second half of the 19th century and the early 20th century, this historical note explores how insights into groundwater abstraction and saltwater intrusion developed, and examples of the earliest field studies are provided. Fundamental research was driven by the need for increasing water supply, but the progress of science did not lead to sustainable management practices everywhere. Research outcomes were shared between scientists of different countries, marking the beginning of coastal hydrogeology as a scientific specialization in the first decade of the 20th century.     

Detection and extraction of signals from the epoch of reionization using higher-order one-point statistics

Detecting redshifted 21-cm emission from neutral hydrogen in the early Universe promises to give direct constraints on the epoch of reionization (EoR). It will, though, be very challenging to extract the cosmological signal (CS) from foregrounds and noise which are orders of magnitude larger. Fortunately, the signal has some characteristics which differentiate it from the foregrounds and noise, and we suggest that using the correct statistics may tease out signatures of reionization. We generate mock data cubes simulating the output of the Low Frequency Array (LOFAR) EoR experiment. These cubes combine realistic models for Galactic and extragalactic foregrounds and the noise with three different simulations of the CS. We fit out the foregrounds, which are smooth in the frequency direction, to produce residual images in each frequency band. We denoise these images and study the skewness of the one-point distribution in the images as a function of frequency. We find that, under sufficiently optimistic assumptions, we can recover the main features of the redshift evolution of the skewness in the 21-cm signal. We argue that some of these features – such as a dip at the onset of reionization, followed by a rise towards its later stages – may be generic, and give us a promising route to a statistical detection of reionization.     

MINERALOGY,PETROLOGY AND CHEMISTRY OF LUNAR ROCK 12039

Rock 12039 belongs to the olivine-depleted group of magmatic rocks characterized by normative and modal SiO₂, absence or very low abundance of olivine, and high FeO/(FeO + MgO), Ti/Cr, and CaO/MgO ratios. Clinopyroxenes in this rock show a complex, essentially continuous, compositional zonation from augite cores through ferroaugite to ferrohedenbergite with an abrupt discontinuity at the pyroxferroite contact and, thus, are different from pyroxene in most other Apollo 12 rocks. Two grains contain thin subcalcic pigeonite zones. Texture, presence of very fine (< 1 μm) exsolution lamallae, and pyroxene zoning indicate a relatively rapid cooling history and pronounced in situ chemical fractionation. Rock 12039, on the basis of mineralogy and bulk composition, is the most highly differentiated member of the olivine-depleted basalt group     

Silicones in Chesapeake Bay sediments

Sediment samples from the upper reaches to the mouth of the Chesapeake Bay were analysed for extractable organic silicon (silicone) content. Organic silicon in the sediments ranged from less than 0.2 to some 36 ppm, w/w. In general, silicone tended to accumulate in high depositional areas: the northern bay, and along the shores to the south. While present, anthropogenic inputs in terms of defined source were not clear. It appears that processes in the bay act to rapidly remove silicone from the water column, probably on a function of the flocculation/precipitation of seston, especially in the northern area.