Les gisements d'émeraude de la Cordillère Orientale de la Colombie: Nouvelles données métallogéniques

Emerald deposits of Colombia are confined to lower Cretaceous shales of the Eastern Cordillera. The tectonic pattern of the deposits is related to deep reverse and large regional fault systems. Hydrofracturing is the main factor controlling emerald mineralization. It permitted to the hydrothermal solutions to permeate through fractures but also along stratification planes forming in this case stratabound mineralizations. Emerald occurs in calcite veins, veinlets, pockets and brecciated zones associated mainly with pyrite, quartz, parisite, codazzite and fluorite. Emerald mineralization belongs to an epigenetic hydrothermal process. The alternance of arenite-shale formations in the Cretaceous probably played an important role in the accumulation of solutions and in the propagation of the hydrothermal channels. The origin of emerald involves chemical elements mobilized by the fluids in the Cr-V-Fe-Al-Si-bearing black shales. The source of beryllium remains a problem and is discussed in the paper.     

A note on the correspondence between Mathieu's transformations and redundant variables in lagrangian mechanics

It is shown that, to any change of variables:q _i=q_i(r, t) (i=1,..., n; =1,...,n+m; mn) increasing the number of variables, it is possible to associate a Mathieu's transformation and conversely. The results are applied to the theory of the osculating plane of motion.

---

Resumé On montre qu'à toute transformation:q _i=q_i(r, t)(i=1,..., n; =1,...,n+m; mn) augmentant le nombre de variables, on peut associer une transformation de Mathieu et réciproquement. Les résultats sont appliqués à la théorie du plan osculateur du mouvement.

     

An asymptotic solution for the stellar case of the planar Three-Body Problem

A simplified model of the planar Three-Body Problem is considered in which two particles, forming a close binary, orbit a distant point. A small parameter , related to the distance separating the binary and the remaining mass is defined. The time is eliminated from the equations of motion and an angular variable is used instead. A two-variable expansion procedure is used to find an asymptotic solution. The solution obtained is known completely up to the order ten in , and it is valid for almost arbitrary initial conditions. Specification of the initial conditions leads to a solution which is periodic with respect to a modified time variable.

---

Résumé On considère un modèle simplifé du Problème Plan des Trois Corps, dans lequel deux particules, formant une binaire proche, sont en orbite par rapport à un troisième point éloigné des deux autres. On définit un petit paramètre , lié à la distance séparant la binaire de la particule restante. On élimine le temps des équations du mouvement et on utilise une variable angulaire comme nouvelle variable indépendante. Une méthode de développement à deux échelles est utilisée permettant d'obtenir une solution asymptotique du problème. La solution obtenue est connue complètement jusqu'àl'ordre dix en , et elle est valable pour des conditions initiales très générales. Pour des conditions initiales bien déterminées, on obtient une solution périodique par rapport à une nouvelle variable temporelle.

     

On the role of heat flow, lithosphere thickness and lithosphere density on gravitational potential stresses

Gravitational potential stresses (GPSt) are known to play a first-order role in the state of stress of the Earth's lithosphere. Previous studies focussed mainly on crust elevation and structure and little attention has been paid to modelling GPSt using realistic lithospheric structures. The aim of the present contribution is to quantify gravitational potential energies and stresses associated with stable lithospheric domains. In order to model realistic lithosphere structures, a wide variety of data are considered: surface heat flow, chemical depletion of mantle lithosphere, crustal thickness and elevation. A numerical method is presented which involves classical steady-state heat equations to derive lithosphere thickness, geotherm and density distribution, but additionally requires the studied lithosphere to be isostatically compensated at its base. The impact of varying surface and crustal heat flow, topography, Moho depth and crust density on the signs and magnitudes of predicted GPSt is systematically explored. In clear contrast with what is assumed in most previous studies, modelling results show that the density structure of the mantle lithosphere has a significant impact on the value of the predicted GPSt, in particular in the case of thick lithospheres. Using independent information from the literature, the method was applied to get insights in the state of stress of continental domains with contrasting tectono-thermal ages. The modelling results suggest that in the absence of tectonic stresses Phanerozoic and Proterozoic lithospheres are spontaneously submitted to compression whereas Archean lithospheres are in a neutral to slightly tensile stress state. These findings are in general in good agreement with global stress measurements and observed geoid undulations.     

The Vigny limestones: a record of Palaeocene (Danian) tectonic-sedimentary events in the Paris Basin

Danian marine sedimentation in the Paris Basin occurred between two major erosional phases. The earlier was responsible for the stripping of presumably deposited Maastrichtian sediments and of a variable thickness of Campanian chalk. The later occurred during the late Palaeocene and resulted in the erosion of almost all Danian deposits, which are now limited to small and scattered outcrops. One of these outcrops corresponds to reefal and peri‐reefal limestones of middle to late Danian age, exposed in the quarries of Vigny (NW of Paris). Danian deposits here show intricate relations with the surrounding Campanian chalk. Danian sedimentation was contemporaneous with faulting, which generated signifiant sea‐floor relief and resulted in contrasting depositional areas: topographic highs with coralgal reefs, and depressions where calcirudite channel fill accumulated. Normal faulting occurred along WNW–ESE master faults. The generation of submarine fault scarps gave rise to various types of gravity‐driven phenomena, including the sliding and slumping of large blocks of reefal limestone and the deposition of carbonate debris flows. Along with the redeposition of the Danian carbonates, flows of fluidized and reworked Campanian chalk resulted from the peculiar physical properties of the undercompacted chalks. Erosion and faulting occurred predominantly during the Palaeocene and represent a major episode in the physiographic evolution of the Paris Basin.     

Fracturation d'âge Aptien supérieur sur la bordure orientale de la plate-forme arabique (Haushi-Huqf,Oman)Aptian faulting (Shu'aiba Formation) on the eastern edge of the Arabian Platform (Haushi-Huqf,Oman)

In the Haushi-Huqf (Eastern Central Oman) as in other parts of the Arabian platform, a major sedimentary break is recorded between the Early Aptian carbonates (Shu'aiba Formation) and the Albian orbitolinid-rich marls (Nahr Umr Formation). The unconformity corresponds to a succession of events: (1) a brusque interruption of the regressive sequence of the Shu'aiba limestone (algae and small rudistid build-ups); (2) a stratigraphic gap related to the Late Aptian; (3) the development of a thick ferruginous crust (hardground) that covered the top surface of the Shu'aiba; the hardground is related to a forced flooding surface; (4) the Shu'aiba was rapidly drowned and buried under the Nahr Umr marls. Moreover, the Shu'aiba limestone was subject to faulting NW–SE-trending normal faults before lithification and formation of the ferruginous crust. The faulting episode is clearly dated: post-Early Aptian and pre-Albian. The signification of the faulting remains hypothetical. The syndiagenetic NW–SE normal faults may correspond to ‘en echelon’ faults, combined with transcurrent fault movements (for example the Haushi-Nafun Fault). The possible causes of these intra-platform transcurrent movements are discussed. To cite this article: C. Montenat, P. Barrier, C. R. Geoscience 334 (2002) 781–787.     

La vallée d'Ys : un paléoréseau hydrographique immergé en baie de Douarnenez (Finistère,France)

Interpretation of the recent high-resolution survey, CANADOU 2000, in the Bay of Douarnenez (Finistère, France) allowed us to restore the morphology of the substratum and the sedimentary filling of the bay. The Brioverian and Palaeozoic substratum reveals a well-defined network of incised valleys as results of successive emergence stages of the Bay during the Quaternary. Valleys join in a westward-widened mean valley, called Ys Valley. The present-day sedimentary fill of the bay of Douarnenez appears mainly controlled by the Holocene rise and the consecutive highstand. It comprises fluvial and estuarine deposits filling up incised valleys and marine sedimentation extending out of the incised valleys. To cite this article: G. Jouet et al., C. R. Geoscience 335 (2003).To cite this article: G. Jouet et al., C. R. Geoscience 335 (2003).     

A calderas field at the Marifil Formation, new volcanogenic interpretation, Norpatagonian Massif, Argentina

Major volcanogenic structures within the Marifil Formation allowed to determine the location of a claderas field that spreads along 400 kilometers. This field has at least three large calderas with diameters near to 100 kilometers, recognizable by regional distribution of associated dikes and rhyolite lava flows present at the caldera border that separates a monotonous ignimbritic plateau from a depressed (150 meters) inner volcanic collapsed caldera. The Marifil ignimbritic plateau cover more than 50,000 square kilometers with thicknesses that reach 800 meters. Associated with these plateau ignimbrites there is an important fluorite mineralization.     

Measurement of natural stresses in a Provence mine (Southern France)

Stress measurements were carried out in the Arc syncline using drifs in a lignite mine. Eleven sites were investigated using the flat jack and hydraulic fracturing (or stimulating) methods. Two stress states were found to coexist, one isotropic, the other highly anisotropic. The orientations of the principal stresses are not homogeneous and an orientation ranging from E-W to NE-SW predominates locally. This does not accord with the regional stress field. The vertical stresses are systematically underestimated.     

L'accident du Toulourenc : une limite tectonique entre la plate-forme provençale et le Bassin vocontien à l'Aptien–Albien (SE France)

The WNW–ESE trending Toulourenc Fault Zone (TFZ) is the western segment of the major Ventoux–Lure Fault Zone, which separates the Provençal platform from the Baronnies Vocontian Basin. The TFZ was subject to polyphased Mid-Cretaceous movements, during the Early Aptian and Middle–Late Albian times. The latter faulting episode generated conglomerates and olistoliths resulting from dismantled faultscarps cutting Barremian–Bedoulian limestones. The deformation is related to compressional wrench faulting (NE–SW sinistral faults; dextral component for the TFZ). It induced the uplift of the northwestern corner of the platform, as indicated by a mid-Cretaceous hiatus (Early Aptian pro parte to Early Albian) narrowly delimited in space. The opening of submeridian grabens within the platform favoured the northward transit of channelised coarse-grained Albian sands originating from a southern area. To cite this article: C. Montenat et al., C. R. Geoscience 336 (2004).