Comparison of Fiberglass and Other Polymeric Well Casings, Part III. Sorption and Leaching of Trace-Level Metals

This series of experiments was initiated to determine the overall suitability of three alternative polymeric well casing materials (fluorinated ethylene propylene [FEP], fiberglass-reinforced epoxy [FRE], and fiberglass-reinforced plastic [FRP]) for use in ground water monitoring wells and to compare these materials with polyvinyl chloride (PVC) and polytetrafluoroethylene (PTFE) well casings. This paper focuses on sorption and leaching of metals.
Generally, the fiberglass materials leached more metal contaminants than PVC, FEP, and PTFE. However, with one exception (Pb leaching from FRP), leached concentrations were below maximum allowable limits set by the U.S. Environmental Protection Agency (EPA) for drinking water. With respect to sorption, none of the polymers sorbed the anions tested, but all of them sorbed one or more of the cations tested. FEP and PTFE were much less sorptive than the other materials.     

Compression of magnetic field in a viscous boundary layer

Galloway, Proctor, and Weiss have shown by numerical experiment that the magnetic field extending across a convective cell in a highly conducting viscous fluid may be concentrated into sheets with energy density B ²/8 larger than the kinetic energy density 1/2v ² of the convection by a factor (v/)^1/2 or more. This paper employs conventional boundary layer theory for high Reynolds number to provide a simple analytical example illustrating this remarkable effect of field concentration.This work was supported by the National Aeronautics and Space Administration under grant NGL 14-001-001.     

A multidisciplinary-based conceptual model of a fractured sedimentary bedrock aquitard: improved prediction of aquitard integrity

A hydrogeologic conceptual model that improves understanding of variability in aquitard integrity is presented for a fractured sedimentary bedrock unit in the Cambrian-Ordovician aquifer system of midcontinent North America. The model is derived from multiple studies on the siliciclastic St. Lawrence Formation and adjacent strata across a range of scales and geologic conditions. These studies employed multidisciplinary techniques including borehole flowmeter logging, high-resolution depth-discrete multilevel well monitoring, fracture stratigraphy, fluorescent dye tracing, and three-dimensional (3D) distribution of anthropogenic tracers regionally. The paper documents a bulk aquitard that is highly anisotropic because of poor connectivity of vertical fractures across matrix with low permeability, but with ubiquitous bed parallel partings. The partings provide high bulk horizontal hydraulic conductivity, analogous to aquifers in the system, while multiple preferential termination horizons of vertical fractures serve as discrete low vertical hydraulic conductivity intervals inhibiting vertical flow. The aquitard has substantial variability in its ability to protect underlying groundwater from contamination. Across widespread areas where the aquitard is deeply buried by younger bedrock, preferential termination horizons provide for high aquitard integrity (i.e. protection). Protection is diminished close to incised valleys where stress release and weathering has enhanced secondary pore development, including better connection of fractures across these horizons. These conditions, along with higher hydraulic head gradients in the same areas and more complex 3D flow where the aquitard is variably incised, allow for more substantial transport to deeper aquifers. The conceptual model likely applies to other fractured sedimentary bedrock aquitards within and outside of this region.     

On the long-term stability of terrestrial reference frame solutions based on Kalman filtering

The Global Geodetic Observing System requirement for the long-term stability of the International Terrestrial Reference Frame is 0.1 mm/year, motivated by rigorous sea level studies. Furthermore, high-quality station velocities are of great importance for the prediction of future station coordinates, which are fundamental for several geodetic applications. In this study, we investigate the performance of predictions from very long baseline interferometry (VLBI) terrestrial reference frames (TRFs) based on Kalman filtering. The predictions are computed by extrapolating the deterministic part of the coordinate model. As observational data, we used over 4000 VLBI sessions between 1980 and the middle of 2016. In order to study the predictions, we computed VLBI TRF solutions only from the data until the end of 2013. The period of 2014 until 2016.5 was used to validate the predictions of the TRF solutions against the measured VLBI station coordinates. To assess the quality, we computed average WRMS values from the coordinate differences as well as from estimated Helmert transformation parameters, in particular, the scale. We found that the results significantly depend on the level of process noise used in the filter. While larger values of process noise allow the TRF station coordinates to more closely follow the input data (decrease in WRMS of about 45%), the TRF predictions exhibit larger deviations from the VLBI station coordinates after 2014 (WRMS increase of about 15%). On the other hand, lower levels of process noise improve the predictions, making them more similar to those of solutions without process noise. Furthermore, our investigations show that additionally estimating annual signals in the coordinates does not significantly impact the results. Finally, we computed TRF solutions mimicking a potential real-time TRF and found significant improvements over the other investigated solutions, all of which rely on extrapolating the coordinate model for their predictions, with WRMS reductions of almost 50%.     

Chemical evolution of an inland sabkha: a case study from Sabkha Matti,Saudi Arabia

Hydrogeology Journal - Sabkha Matti is a potential discharge point for regional groundwater systems in the Rub’ al Khali topographic basin of Saudi Arabia. The hydrogeochemical evolution of...     

The separation of field and fluid in the Sun

The magnetic field at the surface of the Sun is confined to widely separated small, intense magnetic flux bundles or fibrils with most of the gas in a relatively field free state in the interstices. There is evidently a systematic field and fluid separation effect in operation, overriding the tendency for turbulent mixing of the two phases. It is well known that a constantly rotating volume of fluid soon excludes any exterior magnetic field. To take the next theoretical step, this paper examines the exclusion of magnetic field from a circular cylinder with oscillating angular velocity. The result is that the field is effectively excluded from any oscillating or tumbling body of fluid that maintains coherence over a sufficiently long time. However, there is no expectation of such long term coherence in turbulent convection in the Sun, suggesting that the observed separation of field and fluid does not come about by the exclusion of field from convective cells. This leads to the conclusion that the separation of fluid and field is a consequence of extraction of fluid from the field through buoyancy and reconnection.     

A model study of tide- and wind-induced mixing in the Columbia River Estuary and plume

A numerical simulation of circulation in the Columbia River estuary and plume during the summer of 2004 is used to explore the mixing involved as river water is transformed into shelf water. The model is forced with realistic river flow, tides, wind stress, surface heat flux, and ocean boundary conditions. Simulated currents and water properties on the shelf near the mouth are compared with records from three moorings (all in 72 m of water) and five CTD sections. The model is found to have reasonable skill; statistically significant correlations between observed and modeled surface currents, temperature, and salinity are all 0.42–0.72 for the mooring records. Equations for the tidally averaged, volume-integrated mechanical energy budget (kinetic and potential) are derived, with attention to the effects of: (i) Reynolds averaging, (ii) a time varying volume due to the free surface, and (iii) dissipation very close to the bottom. It is found that convergence of tidal pressure work is the most important forcing term in the estuary. In the far field plume (which has a volume 15 times greater than that of the estuary), the net forcing is weaker than that in the estuary, and may be due to either tidal currents or wind stress depending on the time period considered. These forcings lead to irreversible mixing of the stratification (buoyancy flux) that turns river water into shelf water. This occurs in both the plume and estuary, but appears to be more efficient (17% vs. 5%), and somewhat greater (4.2 MW vs. 3.3 MW), in plume vs. estuary. This demonstrates the importance of both wind and tidal forcing to watermass transformation, and the need to consider the estuary and plume as part of a single system.     

Diel changes in metal concentrations in a geogenically acidic river: Rio Agrio,Argentina

Rio Agrio in Patagonia, Argentina is a geogenically acidic stream that derives its low-pH waters from condensation of acidic gases near its headwaters on the flanks of the active Copahue Volcano. This study reports the results of three diel (24-h) water samplings in three different pH regimes (3.2, 4.4 and 6.3) along the river. Changes in the concentration and speciation of Fe dominated the diel chemical changes at all three sites, although the timing and intensity of these cycles were different in each reach. At the two acidic sampling sites, total dissolved Fe and dissolved Fe(III) concentrations decreased during the day and increased at night, whereas dissolved Fe(II) showed the reverse pattern. These cycles are explained by Fe(III) photoreduction, as well as enhanced rates of precipitation of hydrous ferric oxide (HFO) during the warm afternoon hours. A strong correlation was observed between Fe(III) and As at the furthest upstream (pH 3.2) site, most likely due to co-precipitation of As with HFO. At the downstream (pH 6.3) location, Fe(II) concentrations increased at night, as did concentrations of rare earth elements and dissolved Al. Photoreduction does not appear to be an important process at pH 6.3, although it may be indirectly responsible for the observed diel cycle of Fe(II) due to advection of photochemically produced Fe(II) from acidic upstream waters.