Upper-atmosphere zonal winds determined from orbital analysis of Cosmos 482, 1972-23A

The orbit of Cosmos 482 has been determined at 55 epochs during the period August 1975–October 1977. Inclined at 52° to the Equator, of eccentricity exceeding 0.3 and perigee height near 210 km, this high drag and high eccentricity orbit is the most eccentric as yet analysed by PROP. The combination of the orbital characteristics, restricted global coverage of observational data, and the many observations of angular measurement at extreme range proved to be troublesome. Cleared of other perturbations, the inclination is analysed to determine the atmospheric rotation rate, λ rev day^?1, of the zonal winds at a height near 235 km. Results reveal a diurnal and seasonal dependence, including a summer value, averaged over local time, of λ = 0.9 and an evening value of λ = 1.4 in the winter months. The resultant wind velocities vary between 48 m s^?1 East to West and 193 m s^?1 West to East, with an average of 48 m s^?1 West to East.     

Quantitative analysis of Cenozoic faults and fractures and their impact on groundwater flow in the bedrock aquifers of Ireland

Faults and fractures are a critical store and pathway for groundwater in Ireland’s limestone bedrock aquifers either directly as conductive structures or indirectly as the locus for the development of karst conduits. From the quantitative analysis of post-Devonian faults and fractures in a range of lithological sequences, this report describes the principal characteristics of Cenozoic strike-slip faults and joints, the youngest and the most intrinsically conductive fractures within Irish bedrock. Analysis of these structures in more than 120 outcrop, quarry, mine and cave locations in a range of bedrock types, provides a basis for: (1) definition of quantitative models for their depth dependency, lithological control, scaling systematics and links to preexisting structure, (2) conceptualisation of their impact on groundwater behaviour, and (3) estimation of groundwater flow parameters. The quantitative models provide constraints on fracture-controlled flow connectivity. Commonly observed decreases in sustainable flows and water strike interceptions with depth are attributed to increasing confinement and decreasing fracture connectivity and dissolution. Faults and joints have quite different end member geometries, with faults having strongly heterogeneous scale-independent properties and joints more often showing scale-dependent stratabound properties. The highest and most sustainable groundwater flows are usually associated with the complexity of structure of Cenozoic faults and of preexisting Carboniferous structures (on which conductive fracturing localises), enhanced by karstification and strongly jointed limestone bedrock particularly in the near-surface. Increased groundwater flow is promoted within bedded, rather than massive (i.e. unbedded), limestone sequences, characterised by bedding-parallel fractures and karst connecting otherwise subvertical fractures and subvertical wells.

     

The radiolysis of SO2 and H2S in water ice: Implications for the icy jovian satellites

Spectra of Europa, Ganymede, and Callisto reveal surfaces dominated by frozen water, hydrated materials, and minor amounts of SO₂, CO₂, and H₂O₂. These icy moons undergo significant bombardment by jovian magnetospheric radiation (protons, electrons, and sulfur and oxygen ions) which alters their surface compositions. In order to understand radiation-induced changes on icy moons, we have measured the mid-infrared spectra of 0.8 MeV proton-irradiated SO₂, H₂S, and H₂O-ice mixtures containing either SO₂ or H₂S. Samples with H₂O/SO₂ or H₂O/H₂S ratios in the 3-30 range have been irradiated at 86, 110, and 132 K, and the radiation half-lives of SO₂ and H₂S have been determined. New radiation products include the H₂S₂ molecule and HSO⁻₃, HSO⁻₄, and SO²⁻₄ ions, all with spectral features that make them candidates for future laboratory work and, perhaps, astronomical observations. Spectra of both unirradiated and irradiated ices have been recorded as a function of temperature, to examine thermal stability and phase changes. The formation of hydrated sulfuric acid in irradiated ice mixtures has been observed, along with the thermal evolution of hydrates to form pure sulfuric acid. These laboratory studies provide fundamental information on likely processes affecting the outer icy shells of Europa, Ganymede, and Callisto.     

The relative role of constructive and destructive processes in dune evolution on Cape Lookout National Seashore,North Carolina,USA

Coastal dunes are dynamic features that are continuously evolving due to constructive (e.g., wind- and wave-driven sediment transport) and destructive (e.g., elevated total water levels during storm events) processes. However, the relative importance of these processes in determining dune evolution is often poorly understood. In this study, ten lidar datasets from 1997 to 2016 are used to determine the relative role of erosion and accretion processes driving foredune change on the coast of Cape Lookout National Seashore, North Carolina, USA. Beach and dune morphometrics reveal that dune toe locations have generally retreated since 1997, while dune crest heights accreted by 0.01–0.02 m/year. We develop three univariate metrics that represent (1) the potential for erosion, i.e., total water level impact hours per year, (2) accretion, i.e., dune building hours per year, and (3) the relative net effect of foredune accretion and erosion processes, i.e., constructive–destructive dune forcing (CDDF) ratio, and test the correlative power of these metrics in explaining changes in foredune morphology. The total water level impact hours per year metric explained as much as 66% and 67% of the variance in dune crest and toe elevations, respectively, across the nearly two decades of dune evolution. The greatest number of dune building hours per year and largest dunes within the study site co-occurred at locations exposed to the dominant cross-shore wind direction as a result of varying shoreline orientation. The CDDF ratio was positively correlated to changes in the dune toe elevation in approximately 70% of dunes within the study site, outperforming the impact and dune building hours per year metrics. Our results show that these three metrics can provide first-order estimates of dune morphometric change across multiple spatial and temporal scales, which may be particularly useful at sites where lidar acquisition is intermittent.     

Adaptive Relative Motion Representation of Space–Time Trajectories

Abstract

In this article the author explains how military geography information is being exploited by modern Armed Forces. In doing so he highlights some of the underlying principles of surveying and cartographic that define paper mapping, and that are still applicable in the digital era.

This article reflects the personal views of Lieutenant Colonel Prain who is currently serving in the Headquarters of the Defence Geographic and Imagery Intelligence Agency.     

Integrity monitoring of fixed ambiguity Precise Point Positioning (PPP) solutions

Traditional positioning methods, such as conventional Real Time Kinematic (cRTK) rely upon local reference networks to enable users to achieve high-accuracy positioning. The need for such relatively dense networks has significant cost implications. Precise Point Positioning (PPP) on the other hand is a positioning method capable of centimeter-level positioning without the need for such local networks, hence providing significant cost benefits especially in remote areas. This paper presents the state-of-the-art PPP method using both GPS and GLONASS measurements to estimate the float position solution before attempting to resolve GPS integer ambiguities. Integrity monitoring is carried out using the Imperial College Carrier-phase Receiver Autonomous Integrity Monitoring method. A new method to detect and exclude GPS base-satellite failures is developed. A base-satellite is a satellite whose measurements are differenced from other satellite’s measurements when using between-satellite-differenced measurements to estimate position. The failure detection and exclusion methods are tested using static GNSS data recorded by International GNSS Service stations both in static and dynamic processing modes. The results show that failure detection can be achieved in all cases tested and failure exclusion can be achieved for static cases. In the kinematic processing cases, failure exclusion is more difficult because the higher noise in the measurement residuals increases the difficulty to distinguish between failures associated with the base-satellite and other satellites.     

Evaluating DEM source and resolution uncertainties in the Soil and Water Assessment Tool

DEMs as important input parameters of environmental risk assessment models are notable sources of uncertainties. To illustrate the effect of DEM grid size and source on model outputs, a widely used watershed management model, the Soil and Water Assessment Tool (SWAT), was applied with two newly available DEMs as inputs (i.e. ASTER GDEM Version 1, and SRTM Version 4.1). A DEM derived from 1:10,000 high resolution digital line graph (DLG) was used as a baseline for comparisons. Eleven resample resolutions, from 5 to 140?m, were considered to evaluate the impact of DEM resolution on SWAT outputs. Results from a case study in South-eastern China indicate that the SWAT predictions of total phosphorus and total nitrogen decreased substantially with coarser resample resolution. A slightly decreasing trend was found in the SWAT predicted sediment when DEMs were resampled to coarser resolutions. The SWAT predicted runoff was not sensitive to resample resolution. For different data sources, ASTER GDEM did not perform better than SRTM in SWAT simulations even it was provided with a smaller grid size and higher vertical accuracy. The predicted outputs based on ASTER GDEM and SRTM were similar, and much lower than the ones based on DLG. This study presents potential uncertainties introduced by DEM resolutions and data sources, and recommends strategies choosing DEMs based on research objects and maximum acceptable errors.     

Tropical cyclone-tornado casualties

Landfalling tropical cyclones often produce tornadoes. This study investigates how hazardous these tornadoes are to human life by analyzing the resultant casualties, which includes fatalities and injuries. From 1995 to 2009, 63 tropical cyclones made landfall in the United States producing a reported 1,139 tornadoes. Most tornadoes resulted in no casualties but a few extreme cases indicate that the potential exists for a substantial number of casualties. Temporal and spatial analyses indicate that most casualties occur when and where the physical risk of tornadoes is elevated.     

Origins of yttrium and rare earth element distributions in metamorphic garnet

Highly variable distributions of yttrium and rare earth elements (Y+REEs) are documented in pelitic garnet from the Picuris Mountains, New Mexico, and from Passo del Sole, Switzerland, and in mafic garnet from the Franciscan Complex, California. The wide variety of these Y+REE zoning patterns, and those described previously in other occurrences, imply diverse origins linked to differing degrees of mobility of these elements through the intergranular medium during garnet growth. In the Picuris Mountains, large, early‐nucleating crystals have radial profiles of Y+REE dominated by central peaks and annular maxima, in patterns that vary systematically with atomic number. Superimposed on these features are narrow spikes in HREEs and MREEs, located progressively rimward with decreasing atomic number. In contrast, profiles in small, late‐nucleating crystals contain only broad central maxima for all Y+REEs. In garnet from Passo del Sole, Y+REE zoning varies radically from sample to sample: in some rocks, crystals of all sizes display only central peaks for all Y+REEs; in others, profiles exhibit irregular fluctuations in Y+REE contents that match up with small‐scale patchy zoning in Y and Ca X‐ray maps. In the Franciscan Complex, Y+REE in garnet cores fluctuate unsystematically, but mantles and rims display concentric oscillatory zoning for both major elements and Y+REEs. Our interpretation of the complexity of Y+REE distributions in metamorphic garnet centres on the concept that these distributions vary primarily in response to the length scales over which these elements can equilibrate during garnet growth. Very short length scales of equilibration, due to low intergranular mobility, produce overprint zoning characterized by small‐scale irregularities. Higher but still restricted mobility yields diffusion‐controlled uptake, characterized by patterns of central peaks and annular maxima that vary with atomic number and are strongly influenced by T–t paths during garnet growth. Still greater mobility permits progressively greater, potentially rock‐wide, equilibration with major‐ and accessory‐phase assemblages, leading to mineralogical controls: an unchanging mineral assemblage during garnet growth produces bell‐shaped profiles resembling those produced by Rayleigh fractionation, whereas changes in major‐ and/or accessory‐phase assemblages produce profiles with distinct annuli and sharp discontinuities in concentration. The very high mobility associated with influxes of Y+REE‐bearing fluids can cause these element distributions to be dominated by factors external to the rock, yielding profiles characterized by abrupt shifts or oscillations that are not correlated to changes in mineral assemblages.