New observations of anomalous X-ray pulsars at low frequencies

We report the results of new observations of three anomalous X-ray pulsars: 1E 2259+586, 4U 0142+61, and XTE J1810-197. The observations were carried out on high-sensitivity radio telescopes of the Pushchino Radio Astronomy Observatory: the Large Phased Array at 111MHz and the DKR-1000 at 62 MHz. New, digital, multi-channel receivers designed for pulsar observations were used. Pulse profiles and dynamical spectra for the three pulsars are presented. The mean flux density for XTE J1810-197 is estimated to be ∼160 mJy at 62 MHz. An estimated spectral index for this pulsar is also presented.     

A Raman spectroscopic study on the structural disorder of monazite–(Ce)

This study addresses whether Raman spectra can be used to estimate the degree of accumulated radiation damage in monazite-(Ce) samples whose chemical composition was previously determined. Our results indicate that the degree of disorder in monazite–(Ce), as observed from increasing Raman band broadening, generally depends on both the structural state (i.e., radiation damage) and the chemical composition (i.e., incorporation of non-formula elements). The chemical effects were studied on synthetic orthophosphates grown using the Li-Mo flux method, and non radiation-damaged analogues of the naturally radiation-damaged monazite–(Ce) samples, produced by dry annealing. We found that the “chemical” Raman-band broadening of natural monazite–(Ce) can be predicted by the empirical formula, $$ {\hbox{FWHM}} {\hbox{[c}}{{\hbox{m}}^{ - {1}}}{]} = {3}{.95} + {26}{.66} \times {\hbox{(Th}} + {\hbox{U}} + {\hbox{Ca}} + {\hbox{Pb)}} {\hbox{[apfu]}} $$ where, FWHM = full width at half maximum of the main Raman band of monazite–(Ce) (i.e., the symmetric PO₄ stretching near 970?cm^?1), and (Th+U+Ca+Pb) = sum of the four elements in apfu (atoms per formula unit). Provided the chemical composition of a natural monazite–(Ce) is known, this “chemical band broadening” can be used to estimate the degree of structural radiation damage from the observed FWHM of the ν₁(PO₄) band of that particular sample using Raman spectroscopy. Our annealing studies on a wide range of monazite–(Ce) reference materials and other monazite–(Ce) samples confirmed that this mineral virtually never becomes highly radiation damaged. Potential advantages and the practical use of the proposed method in the Earth sciences are discussed.     

Ore belts of the Greater Altai and their ore resource potential

The results of comprehensive geological and metallogenic studies of the Greater Altai are presented. This project has been carried out since 1997 under the guidance of Academician G.N. Shcherba. The importance of these investigations is determined by the need to enhance and further develop mineral resources of nonferrous, noble, rare, and other metals for operating mining and metallurgical enterprises of Kazakhstan. The great body of information on the geology, geophysics, and metallogeny of the region obtained over many years has been integrated on the basis of new global tectonics. The Greater Altai embraces the Hercynides of the Rudny Altai, Qalba-Narym, West Qalba, Zharma-Saur, and the adjacent territories of Russia and China. The present-day tectonic units are considered to be detached blocks of ancient continental massifs that drifted in the Paleoasian ocean and then amalgamated into the structure of the Greater Altai during the Hercynian collision. The tectonic and metallogenic demarcation of the studied territory made possible the recognition of the Rudny Altai, Qalba-Narym, West Qalba, and Zharma-Saur ore belts, different in geology, geodynamic evolution, and metallogeny. The formation conditions and localization of volcanic-hosted massive sulfide, gold, and rare-metal deposits pertaining to certain ore-bearing geochronological levels were specified, and the potential of the region for various mineral resources was estimated.     

Melanterite and szomolnokite as weathering products of pyrite from the Bazhenovo Formation

Weathering of pyrite in the core recovered from black shales of the Bazhenovo Formation (Upper Jurassic-Lower Cretaceous) in the West Siberian marine basin promoted the successive formation of melanterite (FeSO₄ · 7H₂O) and szomolnokite (FeSO₄ · H₂O). Szomolnokite was detected in West Siberia for the first time.     

Composition and formation conditions of pay zones in the lower Cretaceous Nizhnyaya Kheta and Yakovlevo formations within the Vankor oil-and-gas field (in the Northeast of West Siberia)

Sedimentologic analysis of cores from wells sunk in the Vankor petroleum field allowed refinement of the accumulation conditions producing the sandy strata of the Nizhnyaya Kheta River (Nizhnekhetsky) Formation accumulated in the coastal marine zone and of the Yakovlevo (Yakovlevsky) Formation accumulated under alluvial-deltaic conditions. Petrographic examination of the sandstones added information on the sources, transport, and accumulation conditions of the terrigenous material in the northeastern marginal part of the West Siberian sedimentation basin.     

Surface changes on crystalline stones due to salt crystallisation

This study assesses the changes on the surface of crystalline stones due to salt crystallisation. Efflorescence was forced to grow on the surface of granite and marbles through 60 cycles of salt crystallisation with sodium sulphate. Changes on surface roughness, gloss and colour were measured every 15 cycles and the specimens were examined with naked eye and SEM. Sodium sulphate produces damage which depends on mineral composition. Results show that granites experience a mechanical decay with an increase in roughness. Peaks of mica can be observed on the surface and cracks widen and grow deeper. Colour and gloss do not show any significant change, although gloss decreases with an increase in surface roughness. In marbles, the decay is mainly chemical. Surface roughness increases due to dissolution of the calcite. White marbles exhibit yellowing. Gloss decreases during the first cycles—as grain boundaries become more visible—but tends to regain almost its initial value as the number of cycles increases. In this case, gloss does not show any relation with surface roughness.     

Effects of sludge pretreatment on sludge reduction in a lab-scale anaerobic/anoxic/oxic system treating domestic wastewater

Excess sludge disposal is one of the serious challenges in biological wastewater treatment. Reduction of sludge production would be an ideal way to solve sludge-associated problems rather than the post-treatment of the sludge produced. In this study, a new wastewater treatment process combining anaerobic/anoxic/oxic system with thermochemical sludge pretreatment was tested in a laboratory scale experiment. In this study, the effects of the sludge pretreatment on the excess sludge production in anaerobic/anoxic/oxic were investigated. The system was operated in two Runs (1 and 2). In Run 1, the system was operated as a reference and in Run 2, a part of the mixed liquid was pretreated thermochemically and was returned to the bioreactor. The average solubilization efficiency of pretreated sludge was found to be about 35 % during the study period of 220 days. Sludge production rate in Run 2 was less than that in Run 1 by about 52 %. Total phosphorous was removed by enhanced biological phosphorous removal with the removal efficiency of 83–87 % and 81–83 % for Run 1 and Run 2, respectively. Total nitrogen removal in Run 2 (79–82 %) was slightly higher than that in Run 1 (68–75 %). The mixed liquor suspended solids/mixed liquor volatile suspended solids ratio was identical after both runs in the range 78–83 %. The effluent water qualities were not significantly affected when operated with thermochemical pretreatment at pH 11 and 60 °C for 3 h during 7 months. From the present study it is concluded that thermochemical sludge pretreatment of anaerobic/anoxic/oxic process plays an important role in reduction of sludge production.     

Fault-line uplifts in the Northeastern Pacific

The nearly latitudinal giant fracture zones in the northeastern Pacific Ocean are accompanied by narrow fault-line uplifts making up tectonic couples that strike for thousands of kilometers. They are especially distinctly expressed in the gravity map of the World Ocean [7]. As is shown in the paper, a compensation mechanism of deep mass displacement operates in the uplift-deepwater trench system. The uplifts have similar asymmetric structures, which reflects the long-term unidirectional effect of the deep geodynamic stress. In my opinion, the system of the fault-line uplifts began to form at the Cretaceous-Cenozoic boundary.