Distribution of the relative plasma turbulence level in the galaxy

The statistical dependence of τ/(DM)² (the ratio of the broadening of a pulsar pulse due to scattering in the interstellar medium to the square of the pulsar’s dispersion measure) on the pulsar’s dispersionmeasure, Galactic coordinates, age, and the angular distance to the nearest supernova remnant are studied. This parameter describes the relative level of electron density fluctuations in the turbulent interstellar plasma. It is shown that the interstellar plasma turbulence level is three orders of magnitude higher in the spiral arms of the Galaxy than outside the arms. The plasma turbulence level is approximately an order of magnitude higher in the Galactic arms, in regions within ?0.3° of supernova remnants, than outside these regions. We conclude that the source of energy for the turbulence in the Galactic arms is supernova explosions in the denser medium there.     

Identifying Source Soils in Contemporary Estuarine Sediments: A New Compound-Specific Isotope Method

A new method is proposed for the identification and apportionment of contemporary source soils contributing to estuarine sediments. The method uses compound-specific isotopic analysis of naturally occurring biomarkers (fatty acids) derived from plants to link source soils to land use within a single catchment. For identification and apportionment of source soils in the estuarine samples, the method uses the isotopic mixing model, IsoSource. The feasible proportions obtained from IsoSource are then scaled to allow for the percent organic carbon in the source soils. With this approach, the estimation of each source soil contribution to a location in the estuary is independent of any degradation of the biomarkers through microbial or biogeochemical processes. Identification relies on the evaluation of the sediment sample relative to a “library” of reference source soils from different land use within the catchment. Selection of potential sources is geographically constrained by the requirement for a natural linkage between each source soil and the sediment site sampled. A case study, using this method, mapped the distribution of three main land use source soils (pasture, native forest, and pine forest) across the river delta in a small estuary fringed with mangroves. Rather than being uniformly distributed, the results indicated that the source soil contributions varied markedly across the delta, raising concerns about the validity of taking single cores to characterize the sediments of an estuary. Coupling the source apportionment results with land use data indicated that the mean percent contribution of pine forest soil in the river delta sediments was almost three times greater than the percent land use area of pine forest in the catchment. Furthermore, isotopic signatures indicated that most of the pine forest soil came from the much smaller areas exposed to erosion by clear cut harvesting and that the soil contribution from recently harvested areas of pine forest could be as much as 20 times greater than that land use area in this catchment. This is the first method that can identify and apportion, by land use on a catchment scale, the sources of soil contributing to the sediment at a location of an estuary. The results are given as a “best estimate”, within definable limits, of the proportional contribution of each potential source soil. Information obtained using this method will allow development of management strategies to alter land use practices to reduce the sediment load to rivers, and thus, the impact on the aquatic ecosystem downstream in estuaries.     

Light Requirements for Growth and Survival of Eelgrass (<Emphasis Type="Italic">Zostera marina</Emphasis> L.) in Pacific Northwest (USA) Estuaries

We developed light requirements for eelgrass in the Pacific Northwest, USA, to evaluate the effects of short- and long-term reductions in irradiance reaching eelgrass, especially related to turbidity and overwater structures. Photosynthesis-irradiance experiments and depth distribution field studies indicated that eelgrass productivity was maximum at a photosynthetic photon flux density (PPFD) of about 350–550 μmol quanta m⁻² s⁻¹. Winter plants had approximately threefold greater net apparent primary productivity rate at the same irradiance as summer plants. Growth studies using artificial shading as well as field monitoring of light and eelgrass growth indicated that long-term survival required at least 3 mol quanta m⁻² day⁻¹ on average during spring and summer (i.e., May-September), and that growth was saturated above about 7 mol quanta m⁻² day⁻¹. We conclude that non-light-limited growth of eelgrass in the Pacific Northwest requires an average of at least 7 mol quanta m⁻² day⁻¹ during spring and summer and that long-term survival requires a minimum average of 3 mol quanta m⁻² day⁻¹.     

Tectonic Evolution and Continental Growth in Altai Orogen, China: Constrained by Geochronology and Nd Isotopic Mapping of Intrusions

The Central Asia Orogenic Belt is the world's largest Phanerozoic accretionary orogen. The Altai orogen was key to understand the orogeny. Voluminous intrusions occur in the Chinese Altai orogen.     

Regional conductance map of Andaman and Nicobar region

To image the electrical conductivity distribution, fluxgate magnetometers are operated at five sites in Andaman and Nicobar region. Transfer functions are estimated for the period range 8–128 min, from nighttime transient geomagnetic variations, using robust regression analysis. The observed induction arrows in Andaman Islands are found to point towards east despite deep sea located towards its west. This indicates that fore-arc basin (Andaman–Nicobar deep) is more conducting than the region of outer non-volcanic Island arc.Thin sheet model requires the conductance of 10,000–35,000 S (with increase conductivity towards the south) for explaining the observed induction pattern. The observed induction pattern at Andaman–Nicobar stations can be explained in terms of high conducting Cretaceous–Tertiary sediments filling the Andaman–Nicobar deep. High conductivity over Invisible bank has been attributed to the partial melts/volatile fluids derived from the subducting Indian plate that are intruding into the eastern margin of fore-arc basin through the West Andaman Fault (WAF).The induction pattern at Great Nicobar station (Campbell Bay) may be related to the highly conducting sediments filling the Mergui basin along with mafic intrusions. Also crustal transition occurs below the Mergui Terrace at the Malayan coast contributing to the enhanced conductivity anomaly.     

Mineral assemblages of titanium-zirconium sands at the Central deposit,the east European platform

The study of mineral assemblages at the Central deposit allowed us to substantially refine the evolutionary model of the deposit and reveal the two main factors that control the variability of its mineralic space: (1) heterogeneity of the ore layer, consisting of a sublittoral bottom placer (the lower part) and a subaerial dune complex partly reworked in the course of a new transgression (the upper part), and (2) postore epigenetic alteration of the ore constituent of sands, which affected the quality of ore concentrates. The results obtained will be used in geological and technological mapping and development of the production program.     

Solar flares associated with singularities in the differential characteristics of magnetic fields

We analyze the flare events of October 28 and May 27, 2003 to examine the possible connection of solar flares with singularities in the differential characteristics of solar magnetic fields. The relation between flares and the behavior of F indicators (which describe structural singularities of the magnetic fields) introduced earlier is analyzed. It is shown that the generation of flares can be associated with self-intersections (or reconnection) of the F = 0 curves, where magnetic reconnection can occur. Consequently, the current sheets generated in such regions can be sources of energy release.     

Temporal variations in the position of the heliospheric equator

It is shown that the centroid of the heliospheric equator undergoes quasi-periodic oscillations. During the minimum of the 11-year cycle, the centroid shifts southwards (the so-called bashful-ballerina effect). The direction of the shift reverses during the solar maximum. The solar quadrupole is responsible for this effect. The shift is compared with the tilt of the heliospheric current sheet.     

Rotational and magnetic corrections to the g-mode frequencies in a one-dimensional MHD model

The central magnetic field and rotation of the solar radiative zone are responsible for corrections to the g-mode frequencies. Magnetogravitational spectra are calculated analytically in a simple one-dimensional MHD model that goes beyond the WKB approximation and avoid any cusp resonances that trap the wave within the radiative zone in the presence of a weak magnetic background. The calculations are compared with spacecraft observations of the 1% frequency shifts for candidate g-modes found in the SOHO GOLF experiment. The magnetic correction is the main contribution for a strong magnetic field satisfying the approximation used. It is shown that a constant magnetic field of 700 kG in the radiative zone provides the required frequency shift for the n = ?10 g-mode. The rotational correction, which is due to the Coriolis force in the one-dimensional model used, is much less than a percent (α_Ω ≤ 0.003).     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.