Large-scale vertical hydroacoustic structure of the North Atlantic and its seasonal variability

A classification based on the number and types of large-scale acoustic waveguides is proposed for the mean seasonal profiles of sound speed propagation. A scheme for North Atlantic zoning, using typical curves of the sound speed vertical distribution, is given. The channel axis's position is shown not to depend on the water mass haline properties, being controlled by the temperature field vertical stratification.Translated by Vladimir A. Puchkin.     

Site response studies in Agartala Urban agglomeration

A systematic investigation using digital microearthquake recorders with short period SS-1 seismometers, covering 76 sites in and around Agartala city, has been carried out for site response (SR) studies in the area. In the northern part of the area, SR varies from 1.15 to 1.85 corresponding to peak frequency 0.76 to 0.93 Hz where soil is mostly semi-consolidated and stiffer than recent Quaternary deposits (Haora River formation). In the southern part of the area, SR varies from 1.12 to 2.42 corresponding to peak frequency from 0.71 to 0.85 Hz within the Dupitila formation (early Quaternary). It is observed that estimated SR from H/V increases from edges to middle of the Haora River valley and impedance contrast fallows the similar trend. This reflects that site response by H/V is influenced by impedance contrast, whereas computed amplification from 1-D model shows opposite trend. The maximum amplification at fundamental frequency of resonance, 1.04 Hz estimated from H/V by near to BH-7, is 2.5 times greater than the impedance contrast/ratio derived from 1-D model for same location. Relationship between resonance frequency and depth was obtained by applying quarter wavelength and Bard (2000) methodologies, which shows linearity, whereas H/V shows its nonlinearity characteristic in soil across the valley part of Haora River. Shear wave velocities, and subsequently, SPT index and factor of safety (by cyclic stress approach) were estimated from geotechnical parameters. Vs30 and site response data were used in this study for getting a first hand information about soil stiffness condition in the area. The estimation of SPT index and factor of safety could be a useful tool for delineating liquefied and none liquefied zones at various depth levels, especially where water table exists at a very shallow level. The expected liquefiable zone was observed at depths varying from 6–25 m beneath the soil bearing zones where percentage of fines is estimated to be more than 35% for the area. This knowledge about subsurface soil characteristics will be useful for the civil engineers/city planners, which can be taken into account at the time of constructing earthquake-resistant structures in the area.     

Persisting challenges for performance-based building assessment

Intense research and refinement of the tools used in performance-based seismic engineering have been made, but the maturity and accuracy of these methods have not been adequately confirmed with actual data from the field. The gap between the assumed characteristics of actual building systems and their idealized counterparts used for analysis is wide. When the randomly distributed flaws in buildings as they exist in urban areas and the extreme variability of ground motion patterns combine, the conventional procedures used for pushover or dynamic response history analyses seem to fall short of reconciling the differences between calculated and observed damage. For emergency planning and loss modeling purposes, such discrepancies are factors that must be borne in mind. Two relevant examples are provided herein. These examples demonstrate that consensus-based analytical guidelines also require well-idealized building models that do not lend themselves to reasonably manageable representations from field data. As a corollary, loss modeling techniques, e.g., used for insurance purposes, must undergo further development and improvement.     

Evaluation of stratospheric ozone,temperature, and aerosol profiles from the LOANA lidar in Antarctica

We present an evaluation of observations from the Lidar Ozone and Aerosol for NDACC in Antarctica (LOANA) at the Dumont d’Urville station, Antarctica. This instrument is part of the Network for the Detection of Atmospheric Composition Change (NDACC), and ensures continuity with lidar measurements made since 1989 with the previous instrument at this site. This study is based on the dataset from 2008 to 2009, and comparisons are made with observations from balloon soundings, and from three satellite experiments: Aura/MLS, TIMED/SABER, and CALIOP/CALIPSO. The lidar ozone data are in very good agreement with the balloon sounding data (ECC sensor), revealing a bias of less than 3% between 17 and 34 km. For temperature, the lidar shows a low bias of ?3 K at 20 km when compared with Aura/MLS. Between 30 and 50 km, the bias is less than 2 K. We also present our initial results showing diurnal variations in temperature. The amplitude of these diurnal cycles is on the order of 1 K and is unlikely to account for the temperature biases between LOANA and the reference instruments. Comparisons of total attenuated backscatter reveal good qualitative agreement between LOANA and CALIOP, with differences of less than 30% in the derived optical depth.     

Results of Many-year Photometry of the Herbig Ae Star AB Aur in the Near Infrared

Astronomy Reports - The results of many-year infrared observations of the Herbig AeBe star AB Aur at 1-5 μm (JHKLM bands) are presented. The duration of the photometric series, together with...     

Current trends of ice coverage changes in the Franz Josef Land Archipelago area

Doklady Earth Sciences - The data on the ice distribution in the Franz Josef Land Archipelago area during the 2010/2011 and 2014/2015 ice seasons depending on climate oscillations are presented...     

Simulation of an in situ iron removal test

This article outlines the main mechanisms for in-situ removal of iron from groundwater. The dependence of ferrous iron kinetic oxidation by dissolved oxygen on the temperature and pH in bicarbonate near neutral groundwater was investigated. The dependence of oxygen consumption efficiency on the iron sorption coefficient, pH, and temperature of groundwater was obtained as a result of modeling of the one well in-situ iron removal test in the Amurskiy water intake facilities.     

Steam-Solid Chromatography Assay of Phthalates in Water Using Detection of Their Hydrolytic Products

A method for the chromatographic analysis of small amounts of phthalates in water was developed. The reaction conditions for the quantitative alkaline hydrolysis of phthalates in water samples to corresponding alcohols are described. The procedure enables us to determine water samples in concentrations of 0.045 … 45 mg/l of di-i-octyl phthalate. The final determination is carried out by the direct injection of otherwise unprepared hydrolytic products into the column of a steam-solid chromatograph. The individual alcohols have been separated according to their boiling points (alcohols C₄? C₉ are eluated under the five-min retention time). The quantitative hydrolysis course was verified on the natural samples of ground water contaminated by ca. 10 thousand kg of di-i-octyl phthalate by a standard addition method. The accuracy of this determination was 97.5% (variation coefficient ? c_x = 1.5%). The stability of di-i-octyl phthalate in water at 20°C and various pH values were also tested.