The oxygen isotope composition of water masses within the North Sea

Based on measurements of the ¹⁸O isotope composition of 247 samples collected over a 3-year period we have assessed the oxygen isotope composition of water masses in the North Sea. This is the first δ¹⁸O data set that covers the entire North Sea basin. The waters lie on a mixing line: δ¹⁸O (‰_VSMOW) = −9.300 + 0.274(S) with North Atlantic sub-polar mode water (SPMW) and surface waters, and Baltic Sea water representing the saline and freshwater end members respectively. Patterns exhibited in surface and bottom water δ¹⁸O distributions are representative of the general circulation of the North Sea. Oxygen-18 enriched waters from the North Atlantic enter the North Sea between Scotland and Norway and to a lesser extent through the English Channel. In contrast, oxygen-18 depleted waters mainly inflow from the Baltic Sea, the rivers Rhine and Elbe, and to a lesser degree, the Norwegian Fjords and other river sources. Locally the δ¹⁸O–salinity relationship will be controlled by the isotopic composition of the freshwater inputs. However, the range of local freshwater compositions around the North Sea basin is too narrow to characterise the relative contributions of individual sources to the overall seawater composition. This dataset provides important information for a number of related disciplines including biogeochemical research and oceanographic studies.     

A comparison of economic performance in the fisheries sector: A short- and long-term perspective

Indicators of the economic performance of fishing vessels are frequently computed in various countries. In this paper, we use different types of information to assess capital value and the economic performance of fishing vessels. On the one hand, field surveys provide technical and financial information on the main components of fishing capital. On the other hand, book values are given in bookkeeping databases. We use both sources of information on fishing capital are used for the same set of vessels, namely the commercial fishing fleet of the French region of Brittany. Based on these two sources, measures of economic performance can be produced for the short term using gross surplus; and for the long term including the cost of capital. The measures of performance obtained are presented and the differences between them are then discussed.     

Developing a building policy for the erosion zone: Solutions to some key (Dutch) questions

In those coastal communities where the most seaward strip of mainland consists of dunes, these dunes often serve as a flexible sea defence. In addition, this strip offers large potential for housing and commercial enterprises. Unfortunately, due to severe storm surges part of this strip (the erosion zone) is subject to erosion, and as a result of which any buildings or infrastructure located here, are destroyed. Therefore, as we will illustrate in this paper, a building policy for this zone should reflect a compromise between two opposite interests: exploitation of the existing potential and, prevention of an unacceptable high risk due to erosion. Accordingly, the authors have developed a framework for such a building policy on the basis of which the desirability of various different types of investments and the location within the erosion zone of such investments can be determined. The examples that are used to illustrate this framework in this paper are limited to experiences in The Netherlands as relevant data and experiences are available and relatively easy accessible here. Nevertheless, the approach as is described is generic and applicable worldwide suggesting that the discovered unused potential for exploitation is not just limited to The Netherlands.     

Direct determination of tidal levels for engineering applications based on biological observations

The scarcity of tide gauges in a global scale and the variability of the tidal levels along contiguous coasts mainly due to changing hydrographic conditions make the determination of tidal levels, especially of the Mean Sea Level, not an easy task. Determination of such levels with a precision of about 10 cm, necessary for most coastal engineering works, is usually based on records of temporary tide gauges or on geomorphological techniques. In this paper we present an alternative approach permitting to accurately identify tidal levels with a precision suitable for civil engineering applications based on biological observations on rocky shores, including breakwaters and quays. More specifically, we present evidence that the biological zonation, i.e. the distribution of coastal species in well-defined sub-horizontal belts, is practically insensitive to seasonal and other small-scale fluctuations of the sea level and is clearly related to certain levels, mostly the Mean Low Water (MLW). This approach, somewhat similar to what has been used in the past (for instance for the determination of the geodetic vertical datum in the Republic of Venice, Italy, till approximately AD 1800), permits direct determination of the Mean Sea Level or of other tidal levels on the basis of biological observations without statistical analyses of tide-gauge records with an accuracy of 5–10 cm, especially in microtidal, low-energy coasts.     

Lagrangian measurements and modelling of fluid advection in the inner surf and swash zones

New laboratory and field data are presented on fluid advection into the swash zone. The data illustrate the region of the inner surf zone from which sediment can be directly advected into the swash zone during a single uprush, which is termed the advection length. Experiments were conducted by particle tracking in a Lagrangian reference frame, and were performed for monochromatic breaking waves, solitary bores, non-breaking solitary waves and field conditions. The advection length is normalised by the run-up length to give an advection ratio, A, and different advection ratios are identified on the basis of the experimental data. The data show that fluid enters the swash zone from a region of the inner surf zone that can extend a distance seaward of the bore collapse location that is approximately equal to half of the run-up length. This region is about eight times wider than the region predicted by the classical swash solution of Shen and Meyer [Shen, M.C., Meyer, R.E., 1963. Climb of a bore on a beach. Part 3. Runup. Journal of Fluid Mechanics 16, 113–125], as illustrated by Pritchard and Hogg [Pritchard, D., Hogg, A.J., 2005. On the transport of suspended sediment by a swash event on a plane beach. Coastal Engineering 52, 1–23]. Measured advection ratios for periodic waves show no significant trend with Iribarren number, consistent with self-similarity in typical swash flows. The data are compared to recent characteristic solutions of the non-linear shallow water wave (NLSW) equations and both finite difference and finite volume solutions of the NLSW equations.     

Heavy metals in the benthic animals from hydrothermal vents: Results of neutron activation analysis

A series of samples of inhabitants of hydrothermal vents were collected during the 12th cruise of R/V Akademik Mstislav Keldysh in Guaymas Basin (the Gulf of California) and the Axial Seamount area (Juan de Fuca Ridge). The concentrations of trace and heavy metals in the tissues of Ridgeia piscesae, Riftia pachyptila, and Paralvinella palmiformis were analyzed. The neutron-activation analysis revealed significantly higher concentrations of uranium in the tissues of Paralvinella palmiformis as compared to the ambient seawater. The possible reasons for such phenomenon are discussed. The data obtained by the neutron-activation method are compared with those obtained by the atomic-absorption method for the same tissues analyzed.     

Fundamental study for morphodynamic modelling: Sand mounds in oscillatory flows

Experiments on sand mounds in oscillatory flow, undertaken in controlled, large-scale laboratory conditions, have produced well-defined data sets for model comparison. Three bathymetries with different levels of submergence, including a surface-piercing case, were tested. The maximum slope was about 1:5.5. Sediment transport is due to bed load with ripple formation. The principal time-dependent bulk parameters are the vertical distance of the centre of gravity above the base and the volume of the mound. A semi-implicit finite-volume depth-averaged hydrodynamic model is used to drive morphodynamics, using van Rijn's sediment flux model generalized to take account of bed slope, and some justification is given for depth-averaged modeling in these conditions. Starting the model runs with the conditions at the end of the first cycle avoided initial atypical physical behaviour. In general good predictions were obtained with an angle of repose reduced from the standard value of about 30° for stationary beds to 15°. For these situations, morphodynamics was largely unaffected by a hydrodynamic roughness height in the range 2.5D₅₀ to 51D₅₀, with larger values accounting for ripple roughness. The reduced angle of repose may be physically expected with mobile beds but this specific value is only expected to be suited to this form of bed motion. In one case an exaggerated ripple formed near the top of the mound reducing agreement with experiment. For the submerged case with normal ripple structure excellent predictions were obtained. For the initially surface-piercing mound, the time of submergence was better predicted with a 30° angle of repose, presumably due to the prominent influence of the near stationary bed near the wet/dry interface, although long term predictions were better predicted with 15°. The occurrence of vortex shedding in the first cycle modeled was in agreement with experimental observation.     

Geoacoustic Inversions of Horizontal and Vertical Line Array Acoustic Data From a Surface Ship Source of Opportunity

The application of an inversion methodology produces the first demonstration of a simultaneous solution for geoacoustic and source track parameters from acoustic data collected in a shallow-water, sandy sediment environment. Inversion solutions from data collected in the 2006 Shallow Water Experiment (SW06) are extracted from noise measurements of a surface ship source on an L-array. The methodology includes a screening algorithm to determine a set of frequencies for the inversion data. In addition, the methodology assesses the accuracy of the inversion solution and incorporates an estimation of parameter value uncertainties. The solution from the inversion of the horizontal component of the L-array data from the surface ship source before its closest point of approach (CPA) is used to construct modeled propagation loss for comparison with observed received level (RL) structure as the source departs from CPA. Inversion of the data from a single element in the vertical component of the L-array produces a solution that agrees with the solution obtained from the inversion of horizontal subaperture data. Also, modeled transmission loss (TL) structure obtained from the single-element inversion solution reproduces the depth dependence of the RL structure observed at other elements of the vertical component of the L-array.      

Large bio-geographical shifts in the north-eastern Atlantic Ocean: From the subpolar gyre, via plankton, to blue whiting and pilot whales

Pronounced changes in fauna, extending from the English Channel in the south to the Barents Sea in the north-east and off Greenland in the north-west, have occurred in the late 1920s, the late 1960s and again in the late 1990s. We attribute these events to exchanges of subarctic and subtropical water masses in the north-eastern North Atlantic Ocean, associated with changes in the strength and extent of the subpolar gyre. These exchanges lead to variations in the influence exerted by the subarctic or Lusitanian biomes on the intermediate faunistic zone in the north-eastern Atlantic. This strong and persistent bottom-up bio-physical link is demonstrated using a numerical ocean general circulation model and data on four trophically connected levels in the food chain – phytoplankton, zooplankton, blue whiting, and pilot whales. The plankton data give a unique basin-scale depiction of these changes, and a long pilot whale record from the Faroe Islands offers an exceptional temporal perspective over three centuries. Recent advances in simulating the dynamics of the subpolar gyre suggests a potential for predicting the distribution of the main faunistic zones in the north-eastern Atlantic a few years into the future, which might facilitate a more rational management of the commercially important fisheries in this region.     

Endogenic nature of variations in the bottom topography of the mid-ocean rift zones with intermediate spreading rates

Specific features of variations in the bottom topography of the mid-ocean rift zones with intermediate spreading rates are considered in this work. The rift zones with a transition morphology are analyzed, and the main features of the transition topography are distinguished. Several successive stages of topographic variations, each of which is characterized by a specific relative position of the topographic features of the rift zone cross section, have been distinguished based on an analysis of the character of rift zone topographic variations in going from axial rises to rift valleys. The specific features of variations in the structural segmentation of rift zones with intermediate spreading rates, depending on the morphological changes, have been established. The thermal models of the structure of the rift zone magmatic formations have been considered, and the geodynamic relations of the magmatic systems with the specific features of the morphology and the structural segmentation of the mid-ocean axial zones with the intermediate spreading rates have been discussed.