Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in sediments from Hong Kong

Concentrations of 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were determined in 14 sediment samples collected from four sites in the Mai Po Marshes Nature Reserve (within a RAMSAR Site) and from another six sites in Victoria Harbour and along the Hong Kong coastline. Elevated levels of PCDDs, and particularly OCDD, were detectable in all samples collected from the Mai Po Marshes and five of the six sites. In contrast to PCDDs, PCDFs were mainly found in sediment samples collected from industrial areas (Kwun Tong and To Kwa Wan) in Victoria Harbour. PCDD/F levels and congener profiles in the samples from the Mai Po Marshes Nature Reserve in particular show strong similarities to those reported in studies which have attributed similar elevated PCDD concentrations to nonanthropogenic PCDD sources.     

Verwitterungsversuche mit organischen Säuren an einigen schwerlöslichen Fe-Pb-Zn und Cu Erzmineralen,angewendet auf die Genese des Kupferschiefers

The 1–2 mm fraction of FeS₂, Fe₃O₄, PbS, PbSO₄, ZnS, ZnCO₃, Cu₂S and Cu₂(OH)₂CO₃ was dissolved in water, dilute HCl and 0.01 m organic acids (tannin, salicylic acid and citric acid) at 1 atm and 20° C. Duplicate samples of one gram each were placed in 50 ml of solvent with shaking once each day for one month at pH's of 2, 4 and 6. The pH of all the solutions was maintained by periodic addition of either HCl or NaOH. Comparing the results at pH 6, a value observed under surface conditions, the organic acids had a higher metal ion concentration because of their complexing ability. Results at pH 6 in ppm of the metal ions are shown below: For example the Fe concentration dissolved from pyrite in water was 0.02 ppm but 2.3–4.3 in the organic acids. From malachite 0.2 ppm Cu were dissolved by water but 25–1550 ppm by the organic acids. In general Cu minerals seem to be more soluble in organic acids than the Pb, Zn and Fe minerals. The different solution power of the organic acids within the experiments seems not to be caused by the crystallography of the minerals tested. Further there apparently is no preferential complexing of an organic acid with respect to a distinct anion or cation of the minerals. The experiments therefore show, that it is difficult to predict exactly which organic acid is most effective in dissolving minerals. However the experiments should apply to natural weathering conditions of ore minerals and may aid in understanding metal ion transport. For example the origin of the high Cu concentration in the sedimentary “Kupferschiefer” are more easily explained by weathering and transport of Cu in the form of organo-metallic complexes than by reaction with only water. The Cu content in organic acids is much higher than in water and the Cu concentration in the solutions now is not so strongly controlled by the solubility of Cu-cabonates and phosphates.     

Impact of Heterogeneity on Oxygen Transfer in a Fluctuating Capillary Fringe

We performed quasi‐two‐dimensional flow through laboratory experiments to study the effect of a coarse‐material inclusion, located in the proximity of the water table, on flow and oxygen transfer in the capillary fringe. The experiments investigate different phases of mass transfer from the unsaturated zone to anoxic groundwater under both steady‐state and transient flow conditions, the latter obtained by fluctuating the water table. Monitoring of flow and transport in the different experimental phases was performed by visual inspection of the complex flow field using a dye tracer solution, measurement of oxygen profiles across the capillary fringe, and determination of oxygen fluxes in the effluent of the flow‐through chamber. Our results show significant effects of the coarse‐material inclusion on oxygen transfer during the different phases of the experiments. At steady state, the oxygen flux across the unsaturated/saturated interface was considerably enhanced due to flow focusing in the fully water‐saturated coarse‐material inclusion. During drainage, a zone of higher water saturation formed in the fine material overlying the coarse lens. The entrapped oxygen‐rich aqueous phase contributed to the total amount of oxygen supplied to the system when the water table was raised back to its initial level. In case of imbibition, pronounced air entrapment occurred in the coarse lens, causing oxygen to partition between the aqueous and gaseous phases. The oxygen mass supplied to the anoxic groundwater following the imbibition event was found to be remarkably higher (approximately seven times) in the heterogeneous system compared with a similar experiment performed in a homogeneous porous medium.     

Geochemistry of salt marsh sediments deposited during simulated sea-level rise and consequences for recent and Holocene coastal development of NW Germany

De-embankment in the salt marshes of the island of Langeoog was carried out in 2004, thereby inducing an artificial transgression within an area of 2.2 km². Material from three suspended matter traps (SMTs) located along a N–S transect was collected monthly between January 2006 and February 2007. Besides geochemical (major and trace elements) and grain-size analyses, the duration and height of water cover were continuously measured by pressure gauges during the sampling period at two sites, thus revealing inundation frequency (max. 280 year⁻¹) and level (max. 2.4 m). Generally, the silt-dominated SMT material exhibits a geochemical composition similar to that of suspended particulate matter from the adjacent Wadden Sea. However, distinctly increasing enrichments of TOC, P, Mn and Mo from the shoreline towards the higher salt marsh clearly indicate fractionation processes during material transport. Geochemical comparison with older Holocene coastal deposits reveals a mixture of brackish and tidal flat sediments, thus reflecting an early stage of sea-level rise and the development from a terrestrial towards a marine-dominated system. Sedimentation rates are higher than the local sea-level rise, as revealed by vertical salt marsh growth. Storm surges deliver the highest amounts of sediment and play an important role in salt marsh accumulation within the study area. Average accumulation rates of TOC (780 t year⁻¹), P (54 t year⁻¹) and Mn (5.2 t year⁻¹) in the de-embanked area suggest that the former sand-dominated sediments currently receive significant amounts of reactive organic-rich material, thus fostering biogeochemical cycling.     

Three-dimensional geostatistical inversion of flowmeter and pumping test data

We jointly invert field data of flowmeter and multiple pumping tests in fully screened wells to estimate hydraulic conductivity using a geostatistical method. We use the steady-state drawdowns of pumping tests and the discharge profiles of flowmeter tests as our data in the inference. The discharge profiles need not be converted to absolute hydraulic conductivities. Consequently, we do not need measurements of depth-averaged hydraulic conductivity at well locations. The flowmeter profiles contain information about relative vertical distributions of hydraulic conductivity, while drawdown measurements of pumping tests provide information about horizontal fluctuation of the depth-averaged hydraulic conductivity. We apply the method to data obtained at the Krauthausen test site of the Forschungszentrum Jülich, Germany. The resulting estimate of our joint three-dimensional (3D) geostatistical inversion shows an improved 3D structure in comparison to the inversion of pumping test data only.     

A Dynamic Model to Simulate Arsenic,Lead, and Mercury Contamination in the Terrestrial Environment During Extreme Floods of Rivers

Beside damages of infrastructure in industrial regions, extreme floods can cause contamination with particle‐bound pollutants, e. g., due to erosion of soils and sediments. In order to predict contamination with inorganic pollutants, the transport and fate of arsenic, lead, and mercury during a fictive flood event of River Vereinigte Mulde in the region of Bitterfeld (Germany) with 200 years recurrence time was modeled. The finite element model system Telemac2D, which is subdivided into a hydrodynamic (Telemac‐2D), a transport (Subief‐2D), and a water quality module (wq2subief) was applied. The transport and water quality model models were calibrated using results of sediment trap exposures in the floodplain of River Vereinigte Mulde. Model results exhibited that the spatial patterns of particle‐associated arsenic and lead concentrations significantly changed. Extended, mostly agriculturally used areas showed arsenic and lead concentrations between 150 and 200 mg kg^–1 and 250 and 300 mg kg^–1, respectively, while urban areas were to a great extent spared from high contamination with arsenic and lead. Concentrations of particle‐associated mercury showed a pattern distinct from those of arsenic and lead. Outside of small patches with concentrations up to 63 mg kg^–1, concentrations of particle‐associated mercury remained close to zero. Differences in the spatial patterns of the three pollutants regarded mainly arise from significantly different initial and boundary conditions. Sensitivity analyses of initial and boundary conditions revealed a high sensitivity of particle‐bound pollutant concentrations, whereas the sensitivities of concentrations of suspended sediments and soluble pollutants were mediocre to negligible.     

A Dynamic Model to Simulate Spills of Fuel and Diesel Oil in the Terrestrial Environment during Extreme Fluvial Floods

Extreme fluvial floods may cause severe contamination with fuel oil and diesel, originating from gasoline pipes and tanks in private households and industrial areas, respectively. Geo‐referenced oil spills in the region of Bitterfeld (Germany) after extreme flood events, such as in August 2002, were simulated using the two‐dimensional (2D) Finite Element model system Telemac2D, which is subdivided into a hydrodynamic (Telemac‐2D) and a transport module (Subief2D). Fuel oil settled via adhesion showed a thickness of less than 1.0 mm. Fuel oil concentrations on the flood wave amounted up to 80 g m^–3 in the vicinity of the point sources. At a distance of several hundred meters downstream of the point sources, the fuel oil concentrations were calculated to be zero. Settled areas were only partially contaminated with fuel oil. While one village experienced severe oil contamination, the town of Bitterfeld was almost unaffected by oil spills. It was demonstrated that the 2D transport model applied is capable of simulating fuel oil spills during extreme high waters in the terrestrial environment. Such simulations of fuel oil spills will feed into a GIS‐based decision support system of flood protection.     

First U–Pb geochronology on detrital zircons from Early-Middle Cambrian strata of the Torgau-Doberlug Syncline (eastern Germany) and palaeogeographic implications

International Journal of Earth Sciences - LA-ICP-MS U–Pb data from detrital zircons of the Ediacaran to Cambrian siliciclastic sequence of the Torgau-Doberlug Syncline (TDS, Saxo-Thuringia,...     

Numerical modeling of early diagenetic processes in Haiyang 4 Area in the northern slope of the South China Sea

Early diagenesis affects the distribution of solutes and minerals in unconsolidated sediments. The investigation of diagenesis is critical to understanding the geochemical transformation and benthic fluxes of elements. During the cruise mission SO-177 in 2004, gravity coring samples were recovered in the Haiyang 4 Area of the northern slope of the South China Sea (SCS). The geochemical concentrations in interstitial water were determined onboard. The 1D C.CANDI reactive transport software was used to model the early diagenesis processes at four sites: 56-GC-3, 70-GC-9, 94-GC-11, and 118-GC-13. All of the simulations reproduced concentration profiles that matched the measurements with the implemented geochemical reactions. The degradation of organic carbon and anaerobic oxidation of methane (AOM) primarily determine the distribution of solutes in the working area. The degradation is active in the top 150 cm, and AOM is vigorous at depths below 200 cm. The local advective flux, sediment rate, and kinetic reaction constants of organic matter, methane and sulfate were calibrated based on the existing concentrations of pore water solutes. Geochemical reactions in this area occur in considerably deeper layers compared to depths cited in the literature. The model results provide evidence for the existence of deep hydrocarbon reservoirs that provide methane to the upper sediments.     

Enabling collaborative GeoVisual analytics: Systems,techniques, and research challenges

Collaboration across disciplines is recognized as one of the great challenges for research in visual analysis of geographic information (GeoVisual Analytics, GVA). Considering the increasing availability of geodata and the complexity of analytical problems, the need to advance the support for collaborative work is becoming more pressing and prominent. This article contributes to this objective by reviewing the state‐of‐the‐art of the support for collaborative work in GVA systems and by identifying research challenges and proposing strategies to address them. We conducted a systematic review, resulting in the identification of 13 collaborative systems, 6 distinct collaborative techniques, and 3 research challenges. We conclude that GVA is moving toward more effective support of multidisciplinary and cross‐domain collaborative analysis. However, to materialize this potential, research is needed to improve the support for hybrid collaborative scenarios, cross‐device collaboration, and support for time‐critical and long‐term analysis.