Efficiency of Pleurotus florida Laccase on Decolorization and Detoxification of the Reactive Dye Remazol Brilliant Blue R (RBBR) under Optimized Conditions

Laccase from the white‐rot fungus Pleurotus florida, produced under solid‐state fermentation conditions, was used for the decolorization of reactive dye Remazol Brilliant Blue R (RBBR). RBBR was decolorized up to 46% by P. florida laccase alone in 10 min. In the presence of N‐hydroxybenzotriazole (HBT), the rate of decolorization was enhanced 1.56‐fold. Central composite design of response surface methodology with four variables namely, dye, enzyme, redox mediator concentrations, and time at five levels was applied to optimize the RBBR decolorization. The predicted optimum level of variables for maximum RBBR decolorization (87%) was found to be 52.90 mg L^?1 (RBBR), 1.87 U mL^?1 (laccase), 0.85 mM (HBT), and 7.17 min (time), respectively. The validation results showed that the experimental value of RBBR decolorization (82%) was close to the predicted one. The disappearance of C–N and C–X groups, and a small shift in N–H groups in Fourier‐transform infra red (FTIR) spectroscopy confirms the degradation of RBBR chromophore by laccase enzyme. The phytotoxicity of RBBR was considerably reduced after the treatment with laccase. RBBR decolorization kinetics; K_m and V_max were calculated to be 145.82 mg L^?1 and 24.86 mg L^?1 min, respectively.     

A study on the preparation of fine and low soda alumina

A simple process to produce fine and low soda α-alumina (α-Al₂O₃) from a commercial grade aluminium trihydroxide (gibbsite, Al(OH)₃) produced by KC Corporation Ltd was developed. There are two options for this process with the first one producing low soda α-alumina (< 0.05% Na₂O) having a mean particle size of 50 μm. The second option yields a fine product with a mean size of less than 10 μm. In the first option, a plant aluminium trihydroxide containing 0.20% Na₂O was first fluidized with nitrogen at 400–600 °C to yield an amorphous activated alumina. This intermediate product was then treated with acetic or oxalic acid, washed with water and heated to 1200 °C to form calcined α-alumina, having a Na₂O content of less than 0.05%. A 20 min leaching using 0.2 M acetic or oxalic acid could yield an alumina product containing 0.04% Na₂O. In the second option, a new technique for the preparation of fine and low soda α-alumina was evaluated using an attrition mill working also as a leaching vessel at 80 °C. Fine (< 10 μm in mean particle size) and low soda (< 0.04% Na₂O) alumina was produced by a 20 min leaching step with 0.2 M acetic acid and concurrent attrition milling.     

A time‐domain seismic SSI analysis method for inelastic bridge structures through the use of a frequency‐dependent lumped parameter model

It is highlighted in the past that the soil–structure interaction phenomenon can produce a significant alteration on the response of a bridge structure. A variety of approaches has been developed in the past, which is capable of tackling the soil–structure interaction problem from different perspectives. The popular approach of a discretized truncated finite element model of the soil domain is not always a numerically viable solution, especially for computationally demanding simulations such as the probabilistic fragility analysis of a bridge structure or the real time hybrid simulation. This paper aims to develop a complete modeling procedure that is capable of coping with the soil–structure interaction problem of inelastic bridge structures through the use of a frequency dependent lumped parameter assembly. The proposed procedure encounters accuracy and global stability issues observed on past methods while maintaining the broad applicability of the method by any commercial FEM software. A case study of an overpass bridge structure under earthquake excitations is illustrated in order to verify the proposed method. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects of the Changjiang river discharge on sea surface warming in the Yellow and East China Seas in summer

This study explores the effects of the Changjiang (also called the Yangtze River) river discharge (CRD) on the density stratifications and associated sea surface temperature (SST) changes using a global ocean general circulation model with regional focus on the Yellow and East China Seas (YECS). It is found that CRD increases the SST in summer through a barrier layer (BL) formation that tends to enhance stratification at the mixed layer base, and thus reduces both vertical mixing and entrainment. This process is effective, particularly in August, after the CRD reaches its maximum in July. The SST difference between the composites of flood and drought years confirms that the surface warming is related to surface freshening by the CRD. This result suggests that the BL induced by the CRD is an important contributor to the surface heat budget in the YECS.     

A polarization-color effect in the K-corona

An observation of the corona during the 7 March, 1970 eclipse through a Wollaston prism-red and blue filter combination was carried out for the purpose of confirming the prediction that the component of the K-corona with electric vector radial to the Sun is redder than the tangential component. An analysis of a portion of the resulting data seems to confirm this prediction, and also indicates that the method is useful for determining the three-dimensional configuration of the very inner corona. A three-dimensional configuration is suggested for a portion of the NE quadrant of the Sun, including the large NE streamer and an adjacent low-lying loop.     

Acoustic tomography for monitoring the Sea of Japan: a pilot experiment

A pilot experiment was conducted in the Sea of Japan (also called the East Sea) in September-October 1999, to assess the possibility of using acoustic tomographic techniques for monitoring water mass structure and dynamics. Acoustic m-sequence signals at various frequencies between 250 and 634 Hz were transmitted from bottom-mounted acoustic sources in shallow water off the coast of Vladivostok to vertical-array receiving systems deployed off the north coast of Ulleung-Do island (S. Korea), 558 km to the south. The data are analyzed for temporal correlation, time spread, and transmission loss and are interpreted in terms of a tomographic system for monitoring the East Sea.     

Impact of MJO on the diurnal cycle of rainfall over the western Maritime Continent in the austral summer

This paper investigates the impact of the Madden-Julian Oscillation (MJO) on the diurnal cycle of rainfall over the western Maritime Continent during the austral summer. For this purpose, cyclostationary empirical orthogonal function analysis is applied to the tropical rainfall measuring mission rain rate and the Japanese Reanalysis-25 data for the period 1998–2008. The real-time multivariate MJO index by Wheeler and Hendon (Mon Wea Rev 132:1917–1932, 2004) is adopted to define the intensity and the phase of MJO. It is demonstrated that the hourly maximum rain rate over the domain tends to increase when convectively active phase of MJO approaches the Maritime Continent. In contrast, the hourly maximum rain rate tends to decrease when convectively suppressed phase of MJO resides over the region. The changes in the rain rate due to MJO differ over the ocean and the land. This difference is the greatest when the MJO is in the mature stage. Throughout the day during this stage, terrestrial rain rates show minimum values while diurnally varying oceanic rain rates record maximum values. Thus, precipitation becomes more intense in the morning over the Java Sea and is weakened in the evening over Borneo and Sumatra during the mature stage of MJO. During the decaying stage of MJO over the Maritime Continent, the diurnal cycle of precipitation weakens significantly over the ocean but only weakly over land. Analyses suggest that the anomalous lower level winds accompanied by MJO interact with the monsoonal flow over the Maritime Continent. Westerlies induced by MJO convection in the mature stage are superimposed on the monsoonal westerlies over the equator and increase wind speed mainly over the Java Sea due to the blocking effect of orography. Mountainous islands induce flow bifurcation, causing near-surface winds to converge mainly over the oceanic channels between two islands. As a result, heat flux release from the ocean to the atmosphere is enhanced by the increased surface wind resulting in instability as described in the wind-induced surface heat exchange mechanism. This may contribute to heavy rainfall over the Java Sea in the morning during the mature stage. On the other hand, convergence and vertical velocity over the islands, which play important roles in inducing nighttime rainfall, tend to be weak in the evening during the mature stage of MJO. Strong westerlies arising from MJO and the seasonal flow during the mature stage tend to interrupt convergence over islands. This interruption of convergence by MJO gives rise to decreased rain rates over the land regions.     

Gap size effect on the tribological characteristics of the roller for deep-sea mining robot

To design the deep-sea mining robot, it is essential to analyze the tribological characteristics of its roller. In this study, we introduced the dynamic simulation model to analyze the tribological characteristics of the roller for deep-sea mining robot, considering the temperature, viscosity, viscous damping force, and gap size between the inner and outer rib seals. Effective viscosity changes with gap size in micro/nanoscale while the effective viscosity is equal to the kinematic viscosity in macroscale. For the stable operation of the roller, the effective viscosity must be less than the critical viscosity. As the gap size decreases, the effective viscosity increases while the critical viscosity decreases. This study shows that the gap size between the inner and outer rib seals of roller is the most dominant factor in designing the roller for deep-sea mining robot to use at relatively low temperatures that are found in the deep-sea environments.     

Effects of Resonances in Corrugated Horn Antennas for a 22-GHz Balancing Radiometer

The Stratospheric WAter vapor RAdiometer (SWARA) is a microwave radiometer designed for ground-based measurements of water vapor (H₂O) in the middle atmosphere (20 to 80 km), including the stratosphere and mesosphere. The instrument is operating in a noncryogenic balancing calibration mode. Since its deployment, features have been observed in the spectrum which can be attributed to resonant variations of the antenna pattern of the corrugated horn. This paper presents copolar and crosspolar antenna pattern measurements of two sister antennas of the SWARA horn, as well as water vapor measurements from both antennas on the ground-based microwave radiometer MI ddle Atmospheric WAter vapor RA diometer. We show that small irregularities in the frequency spectrum at the -20-dB level are visible in the copolar pattern, which, due to the balancing operation scheme used for the radiometer, lead to features in the spectrum that have the same or even higher brightness temperature as the line of interest.