Transmission and reflection of Rayleigh waves at a thin low velocity vertical layer: A laboratory and theoretical study

A three-dimensional ultrasonic modelling was used to study the Rayleigh waves reflected from a thin low velocity vertical layer and those transmitted through the same zone. The reflection and transmission coefficients of the Rayleigh waves have been calculated by an approximate method based on the Green function technique. Nonrigid contact boundary conditions were used for the low velocity layer modelling. A rather good correspondence between the theoretical and experimental absolute values of the reflection and the transmission coefficients was obtained. Some discrepancies between experimental and theoretical results, in particular with regard to phase shifts, may be explained by a certain inadequacy of the theoretical model to the low velocity layer investigated by the ultrasonic modelling.     

A combined study of macroseismic data and focal mechanisms applied to the West-Bohemian earthquake,Czechoslovakia

The main shock of the West-Bohemian earthquake swarm, Czechoslovakia, (magnitudem=4.5, depthh=10 km) exhibits an irregular areal distribution of macroseismic intensities 6° to 7° MSK-64. Four lobes of the 6° isoseismal are found and the maximum observed intensity is located at a distance of 8 km from the instrumentally determined epicentre. This distribution can be explained by the energy flux of the directS wave generated by a circular source, the hypocentral location and focal mechanism of which are taken from independent instrumental studies. The theoretical intensity, which is assumed to be logarithmically proportional to the integrated squared ground-motion velocity (i.e.,I=const+log v ² (t)dt), fits the observed intensity with an overall root-mean-square error less than 0.5°. It is important that the present intensity data can also be equally well explained by the isotropic source. The fit was attained by means of a horizontally layered model though large fault zones and an extended sedimentary basin suggest a significant lateral heterogeneity of the epicentral region. The results encourage a broader application of the simple modelling technique used.     

Recent crustal subsidence at Yellowstone Caldera,Wyoming

Following a period of net uplift at an average rate of 15±1 mm/year from 1923 to 1984, the east-central floor of Yellowstone Caldera stopped rising during 1984–1985 and then subsided 25±7 mm during 1985–1986 and an additional 35±7 mm during 1986–1987. The average horizontal strain rates in the northeast part of the caldera for the period from 1984 to 1987 were: ₁ = 0.10 ± 0.09 strain/year oriented N33° E±9° and ₂ = 0.20 ± 0.09 strain/year oriented N57° W±9° (extension reckoned positive). A best-fit elastic model of the 1985–1987 vertical and horizontal displacements in the eastern part of the caldera suggests deflation of a horizontal tabular body located 10±5 km beneath Le Hardys Rapids, i.e., within a deep hydrothermal system or within an underlying body of partly molten rhyolite. Two end-member models each explain most aspects of historical unrest at Yellowstone, including the recent reversal from uplift to subsidence. Both involve crystallization of an amount of rhyolitic magma that is compatible with the thermal energy requirements of Yellowstone's vigorous hydrothermal system. In the first model, injection of basalt near the base of the rhyolitic system is the primary cause of uplift. Higher in the magmatic system, rhyolite crystallizes and releases all of its magmatic volatiles into the shallow hydrothermal system. Uplift stops and subsidence starts whenever the supply rate of basalt is less than the subsidence rate produced by crystallization of rhyolite and associated fluid loss. In the second model, uplift is caused primarily by pressurization of the deep hydrothermal system by magmatic gas and brine that are released during crystallization of rhyolite and them trapped at lithostatic pressure beneath an impermeable self-sealed zone. Subsidence occurs during episodic hydrofracturing and injection of pore fluid from the deep lithostatic-pressure zone into a shallow hydrostatic-pressure zone. Heat input from basaltic intrusions is required to maintain Yellowstone's silicic magmatic system and shallow hydrothermal system over time scales longer than about 10⁵ years, but for the historical time period crystallization of rhyolite can account for most aspects of unrest at Yellowstone, including seismicity, uplift, subsidence, and hydrothermal activity.     

An example of visualization of the kinematic structure around a single building

Summary The method of flow visualization with smoke allowed us to check the complexity of flow around an isolated building in a full-scale experiment. In the upstream zone the well established horseshoe vortex could be verified. Also the frontal separation point was clearly documented. Whether the flow reattaches to the sidewalls depends on the length of the building. Of special interest was the downstream region. In this region strong interaction of the different vortex structures was observed. The rising spiral vortices, which originated at the lateral edges, are important. Also an occasional breakdown and fast reorganization of the vortex is an interesting fact.This simple flow visualization experiment agrees well with the extensive laboratory experiments and topological criteria developed and used by Hunt (1978).NotesWith 6 Figures     

Magmatism in the eastern Aleutian Arc: temporal characteristic of igneous activity on Akutan Island

Lavas from Akutan Island, located in the eastern Aleutian arc at the transition between continental and oceanic crust, show a gradual change in their petrologic and chemical characteristics over the last 4 million years. The oldest lavas exposed on the island, the Hot Springs Bay Volcanics (HSBV), range from magnesian basalt to dacite (45%–62% SiO₂). The most mafic basalts contain salitic clinopyroxene, Cr- and Al-rich spinel, and pargasitic amphibole suggesting that they were derived from relatively hydrous magmas at greater pressures than lavas from the younger Akutan Volcanics (AKV) and the modern volcano (MOD). AKV lavas also range between basalt and dacite (46%–63% SiO₂), but contain no hydrous phenocrysts and seem to have fractionated within a shallow level magma chamber. Lavas from the modern volcano are andesitic (52%–57% SiO₂) and have a mineral assemblage similar to that of AKV lavas of similar composition. With the exception of clinopyroxene and spinel in the most mafic lavas, the compositions of plagioclase (An_92?45), olivine (Fo_88?51), orthopyroxene (En_69?56), and titanomagnetite (15%–21% TiO₂) phenocrysts found in these lavas are within the range observed in lavas from other Aleutian volcanoes. Variations in the major element chemistry of the older lavas can be reproduced by fractional crystallization of the observed mineral assemblages, however closed system crystal fractionation models are inadequate to explain the trace element variations. During the last 4 million years, La/Yb ratios have decreased (6.5–3.3 for HSBV lavas and 2.9–1.9 for MOD lavas) whereas Ba/La ratios appear to have increased slightly (37–43 for HSBV and AKV, and 41–45 of MOD). The lower La/Yb ratios of MOD lavas correspond with lower total abundances of the REE and slightly higher Sr and Pb isotopic ratios. The increased⁸⁷Sr/⁸⁶Sr ratios and Pb isotopic ratios in the MOD lavas, the less enriched LREE, and the higher Ba/La ratios may result from partial melting of an arc source which has experienced previous melting events but has continued to be contaminated by a component from the subducting slab. It may also indicate a change in the degree of partial melting of the underlying mantle, which corresponds to a different percentage of a slab derived component being incorporated into the overlying mantle.     

Petrology,isotope characteristics,and K-Ar ages of the Maranhão,northern Brazil,Mesozoic basalt province

Northern Brazil contains remnants of Mesozoic flood basalts and hypabyssal rocks that were apparently emplaced during tectonism related to opening of the Atlantic Ocean. Analyses and new K-Ar ages reveal that this 700x250 km Maranhão province (5°–8°S) has low-Ti basalts (1.1 wt% TiO₂) in the western part that range about 160 to 190 Ma, and high-Ti basalts (3.4–4.4 wt% TiO₂) in the eastern part about 115–122 Ma. Low-Ti basalt compositions are less evolved and have a smaller range, Mg# 62-56, than the high-Ti basalts, Mg# 44–33. General characteristics of the least evolved members of low- and high-Ti groups include, respectively, Zr 100 and 250 ppm, Sr 225 and 475 ppm, Ba 200 and 500 ppm, Nb 10 and 26 ppm, Y 29 and 36 ppm, La/Yb_(n) 4.2 and 8.8, where La_(n) is 30 and 90. Overall compositions resemble the low- and high-Ti basaltic rocks of the Mesozoic Serra Geral (Paraná) province in southern Brazil. The Maranhão low-Ti basalts have more radiogenic Sr and Pb and higher ¹⁸O than the high-Ti basalts. Respectively, low- vs high-Ti: _Sr26–54 vs 15–18; ²⁰⁶Pb/²⁰⁴Pb=18.25–.78 vs 18.22–.24; and ¹⁸O 8.9–12.6 vs 6.5–8.6. Nd isotopes overlap: _Nd–1.6 to –3.8 vs –2.1 to –3. Ages, compositions, and isotopes indicate that the low- and high-Ti groups had independent parentages from enriched subcontinental mantle. However, both groups can be modeled from one source composition if low-Ti basalt isotopes reflect crustal contamination, and if the parentages for each group were picritic liquids that represent either higher (for low-Ti) or lower (for high-Ti) percentages of melting of that single source. When comparing Pb isotopes of Maranhão and Serra Geral high-Ti basalts (uncontaminated) to evaluate the DUPAL anomaly, Maranhão has Pb 7/4=4.6–11, and Pb 8/4=72–87; Serra Geral has Pb 7/4=10–13, and Pb 8/4=95–125. The small difference is not enough to conform to DUPAL contours, and is inconsistent with large-scale isotopic heterogeneity of mantle beneath Brazil prior to rifting of South America from Africa. Maranhão low-Ti magmas probably relate to the opening of central North Atlantic, and high-Ti magmas to the opening of equatorial Atlantic. The proposed greater percentage of source melting for low-Ti basalts may reflect a Triassic-Jurassic hotspot, while lesser melting for high-Ti magmas may relate to Cretaceous decompressional (rifting) melting.     

Examples of predominantly two-body orbits in the Sun-Jupiter asteroid system

Accurate numerical continuation of families of plane symmetric direct periodic orbits around the large primary in the Sun-Jupiter case of the restricted problem of three bodies allows the determination of the vertical branching points where families of three-dimensional symmetric periodic orbits bifurcate from the planar ones. Three families of plane periodic orbits, and the initial segments of ten bifurcating families of three-dimensional ones are determined. The stability of these families is examined and examples of their orbits are illustrated.     

Hypersensitization of Kodak infrared plates: Results of some chemical methods and pre-exposure

Tests have been carried out on Kodak Spectroscopic Plates Type I-N, in order to find a treatment which could be easily applied to the infrared plates to be used with the Loiano 152 cm,f/8, Ritchey-Chrétien telescope. Different techniques have been tested, not only with the aim of achieving the higher speed gain, but also to obtain the better uniformity and reproducibility. Our results suggest that the advantages of preexposure techniques are underestimated in this respect. Furthermore, we find that blue and infrared preexposures (at 0.8 s) give different results, suggesting a different degree of dispersity in the latent image produced by pre-exposure in the two cases.Baths including both ammonia and Ag-compounds provide the higher speed gains, but the increment of the fog is often non-uniform and/or very high. The best results have been obtained with baths including AgNO₃ and AgCl. The rejuvenation process found by Sanduleak and the results obtained by Jenkins and Farnell on the reversibility of the gains due to silver-nitrate baths have been confirmed.     

Synchrotron cooling and annihilation of ane +-e − plasma: The radiation mechanism for the 5 March, 1979 transient

Positron-electron pair radiation is examined as a mechanism that could be responsible for the impulsive phase emission of the 5 March, 1979 transient. Synchrotron cooling and subsequent annihilation of the pairs can account for the energy spectrum, the very high brightness, and the 0.4 MeV feature observed from this transient, whose source is likely to be a neutron star in the supernova remnant N49 in the Large Magellanic Cloud. In this model, the observed radiation is produced in the skin layer of a hot, radiation-dominated pair atmosphere, probably confined to the vicinity of the neutron star by a strong magnetic field. The width of this layer is only about 0.1 mm. In this layer, 10¹² generations of pairs are formed (by photon-photon collisions), cooled and annihilated during the 0.15 s duration of the impulsive phase. The very large burst energy implied by the distance of the LMC, and its very rapid release, are unsolved problems. We mention, nonetheless, the possibility of neutron star vibrations, which could transport the energy coherently to the surface, heat the atmosphere mechanically to a hot, pair-producing temperature, and have a characteristic damping time roughly equal to the duration of the impulsive phase.Paper presented at the Symposium on Cosmic Gamma-Ray Bursts held at Toulouse, France, 26–29 November, 1979.     

The spectra and light curves of two gamma-ray bursts

During the last half of 1977 the UCSD/MIT Hard X-Ray and Low Energy Gamma-Ray Experiment of HEAO-1 observed two of the three gamma-ray bursts detected by at least three satellites. The first of these bursts (20 October, 1977) had a fluence of (3.1±0.5)×10^–5 erg cm^–2 integrated over the energy range 0.135–2.05 MeV and over its duration of 38.7 s, placing it among the largest bursts observed. The second (10 November, 1977) had a fluence of (2.1±0.8)×10^–5 erg cm^–2 integrated over the energy range 0.125–3 MeV and over its duration of 2.8 s. The light curves of both bursts exhibit time fluctuations down to the limiting time resolution of the detectors (0.1 s). The spectrum of the 20 October, 1977 burst can be fitted with a power law (index –1.93±0.16), which is harder than other reported gamma-ray burst spectral fits. This burst was detected up to 2.05 MeV, and approximately half of its energy was emitted at photon energies above 0.5 MeV. The spectrum of the 10 November, 1977 burst is softer (index –2.4±0.7) and is similar to the spectrum of the 27 April, 1972 burst.Paper presented at the Symposium on Cosmic Gamma-Ray Bursts held at Toulouse, France, 26–29 November, 1979.