Solar radiative output and its variability: evidence and mechanisms

Electromagnetic radiation from the Sun is Earths primary energy source. Space-based radiometric measurements in the past two decades have begun to establish the nature, magnitude and origins of its variability. An 11-year cycle with peak-to-peak amplitude of order 0.1 % is now well established in recent total solar irradiance observations, as are larger variations of order 0.2 % associated with the Suns 27-day rotation period. The ultraviolet, visible and infrared spectral regions all participate in these variations, with larger changes at shorter wavelengths. Linkages of solar radiative output variations with solar magnetism are clearly identified. Active regions alter the local radiance, and their wavelength-dependent contrasts relative to the quiet Sun control the relative spectrum of irradiance variability. Solar radiative output also responds to sub-surface convection and to eruptive events on the Sun. On the shortest time scales, total irradiance exhibits five minute fluctuations of amplitude %, and can increase to as much as 0.015 % during the very largest solar flares. Unknown is whether multi-decadal changes in solar activity produce longer-term irradiance variations larger than observed thus far in the contemporary epoch. Empirical associations with solar activity proxies suggest reduced total solar irradiance during the anomalously low activity in the seventeenth century Maunder Minimum relative to the present. Uncertainties in understanding the physical relationships between direct magnetic modulation of solar radiative output and heliospheric modulation of cosmogenic proxies preclude definitive historical irradiance estimates, as yet.Received: 26 August 2004, Published online: 16 November 2004 Correspondence to: Claus Fröhlich     

State and Development： Changes in Livelihood Strategies in Garhwal with Special Reference to Ecotourism in the Gangotri Region

The object of the paper is to provide an insight into the changes in livelihood strategies of the people in the Garhwal Himalayas over time. From sustaining an economy based on transit trade and subsistence agriculture, there has been a shift towards tourism in recent times. This shift has been due to the tradition of pilgrimage to the higher reaches and also due to promotion by the state by developing infrastructure and providing incentives. The paper is divided into four parts. In the first part, the policies of the colonial state and the events leading to the destruction of forests and the impoverishment of the self-sustaining semi-pastoral economy in the Garhwal Himalayas are outlined. It is argued that the destruction of forests and subsequently, the economy of the Himalayas were directly responsible for the large-scale migration to the plains. This also led to further exploitation of forests by the people who were unfamiliar with any other form of livelihood. The paper also discusses the policies of the newly independent Indian state and sees them as an extension of the British policy of large-scale exploitation of Himalayan forests for the purpose of development and economic growth. In the third section, the growth of ecotourism as a direct outcome of the orocess of deforestation and as resulting from the need of society to conserve and yet to earn a livelihood is discussed. The case study of the Gangotrir egion examines the dilemma faced by the people of Garhwal in sustaining their livelihood, income or the development in the area. In addition, tourism has fostered monopolies of groups external to the region thereby contributing neither to the income or the development in the area. In addition, there is an added threat to the environment-deforestation, and erosion-a direct outcome of increased and unplanned tourism. Such problems demand state intervention and management of t.ourism. The conclusion to the paper asserts that in order that the requirements of the society to progress and to sustain itself in its natural habitat are not compromised, it is essential to increase the process of democratization by strengthening local structures and by vesting the community with the autonomy to determine its future. The paper therefore argues that ecotourism in the Himalayas undertaken without local involvement is not desirable. The constant need for local monitoring of external agencies or even of the State‘s participation and the need for re-evaluation of environmental standards are cumbersome details that add to the costs of promoting low-impact tourism. To be viable, ecotourism should be community based and the needs of the community, their ideas of conservation should be given prime importance and local community must be encouraged to review the standards governing conservation. Local structures should thus receive patronage and promotion, so that ecotourism becomes a dynamic facet of economic development.     

Accessibility for High Asia： Comparative Perspectives on Northern Pakistan＇s Traffic Infrastructure and Linkages with Its Neighbours in the Hindukush-Karakoram- Himalaya

Starting with a discussion of development concepts which were applied in practice and which followed the developmentalist paradigm the expansion of traffic infrastructure in colonial and post-colonial periods is presented for the High Asian mountain rim. Selective railways and roads are the major feature of this development, which aimed first on serving the convenience of hill station visitors and followed strategic considerations later on. This bias between regional planning and implementation remains a characteristic feature. At the same time traffic infrastructure without asphalt roads is important for the mountain areas, thus breaking up the strong correlation between development and asphalt roads.     

Preliminary study on PAH degradation by bacteria from contaminated sediments in Xiamen Western Sea,Fujian, China

In order to estimate the biodegradation of three polycyclic aromatic hydrocarbons (PAHs) compounds, bacterial strains were isolated from marine sediments in three heavily contaminated sites (Yuandang Lake, Dongdu Port and Aquacultural zones in Maluan Bay) in Xiamen Western Sea. The results show three bacterial strains, which used pyrene as the sole carbon source, were identified as strains of Aureobacterium sp.,Arthrobacter sp., Rhodococcus sp. The PAH-degrading bacteria isolated had a strong ability to degrade phenanhrene, fluoranthene and pyrene at different degradation rates. The highest degradation rate was observed when three PAH compounds were mixed with an individual strain in the medium. The three PAHs were degraded after one week with a degradation rate of 89.94 % for phenanthrene and 93.4 % for both of fluoranthene and pyrene.In addition, after 25 days of incubation, the degradation rate was 99.98 % for phenanthrene and 99.97 % for both of fluoranthene and pyrene. Optical density was measured to estimate bacterial growth during the degradation of PAHs. Highest levels of bacterial growth were observed with a three PAH mixture in the culture, suggesting that the concentration of PAHs influenced bacterial growth and the highest levels of degradation for most series were detected after one week of incubation.     

Use of microelectrodes for electrochemical measurement of nitric oxide in natural seawater

In this paper, the application of a homemade Nation and Co(Salen) modified platinum microelectrode and an ISO-NOPMC microsensor (World Precision Instruments, USA ) to measure nitric oxide in natural seawater is reported. These two microelectrodes are suitable for the measurement. In natural seawater, the sensitivity and stability of the ISO-NOPMC microsensor are higher than that of the homemade Nation and Co(Salen) modified platinum microelectrode.     

Features of clay minerals in the YSDP102 core on the continental shelf of the southeast Yellow Sea

Ninety-eight clay mineral samples from the YSDP102 core were analyzed by x-ray diffractometer to study the four clay minerals: illite, chlorite, kaolinite and smectite. Twenty-eight samples had been analyzed on the laser particle-siz eanalyzer to reveal the particle features of the sediments. Distribution of the clay minerals and the particle characteristics in the YSDP102 core show that the core experienced three different depositional periods and formed three different sedimentary intervals due to different sediment sources and different depositional environments. Features of the clay minerals and the heavy minerals in the YSDP102 core indicate that coarse-grained sediments and fine-grained sediments result from different sources. The Yellow Sea Warm Current has greatly influenced the sedimentary framework of this region since the current‘s formation.     

Selection of environmental conditions for nearshore structure design

1　Introduction　InChina ,coastalcitiesaremostlyregionaleconomicdevelopmentcenters.Becauseoftheirspecialgeogra phiclocations ,typhoonsandassociatedstormsurgescauseheavylossesoflivesandproperties.In 1 992 Qing daowasfloodedduetothecoincidenceoftheastrono m…     

Experiments on the kinetics of partial melting of a leucogranite at 200 MPa H<Subscript>2</Subscript>O and 690–800°C: compositional variability of melts during the onset of H<Subscript>2</Subscript>O-saturated crustal anatexis

We have experimentally investigated the kinetics of melting of an aplitic leucogranite (quartz+sodic plagioclase of ≈Ab₉₀+K-feldspar+traces of biotite) at 690, 740, and 800°C, all at 200 MPa H₂O. Leucogranite cylinders, 3.5 mm in diameter and 7 mm in length, were run in the presence of excess H₂O using cold-seal pressure vessels for 11–2,925 h. At 690 and 740°C and any experimental time, and 800°C and short run times, silicate glass (melt at run conditions) occurs as interconnected films along most of the mineral boundaries and in fractures, with the predominant volume occurring along quartz/feldspars boundaries and quartz/plagioclase/K-feldspar triple junctions. Glass film thickness is roughly constant throughout a given experimental charge and increases with experimental temperature and run duration. The results indicate that H₂O-saturated partial melting of a quartzo-feldspathic protolith will produce an interconnected melt phase even at very low degrees (<5 vol%) of partial melting. Crystal grain boundaries are therefore completely occluded with melt films even at the lowest degrees of partial melting, resulting in a change in the mechanism of mass transport through the rock from advection of aqueous vapor to diffusion through silicate melt. At 690 and 740°C the compositions of glasses are homogeneous and (at both temperatures) close to, but not on, the H₂O-saturated 200 MPa haplogranite eutectic; glass compositions do not change with run duration. At 800°C glasses are heterogeneous and plot away from the minimum, although their molar ratios ASI (=mol Al₂O₃/CaO+Na₂O+K₂O) and Al/Na are constant throughout the entire charge at any experimental time. Glass compositions within individual 800°C experiments form linear trends in (wt%) normative quartz–albite–orthoclase space. The linear trends are oriented perpendicular to the 200 MPa H₂O haplogranite cotectic line, reflecting nearly constant albite/orthoclase ratio versus variable quartz/feldspar ratio, and have endpoints between the 800°C isotherms on the quartz and feldspar liquidus surfaces. With increasing experimental duration the trends migrate from the potassic side of the minimum toward the bulk rock composition located on the sodic side, due to more rapid (and complete) dissolution of K-feldspar relative to plagioclase. The results indicate that partial melting at or slightly above the solidus (690–740°C) is interface reaction-controlled, and produces disequilibrium melts of near-minimum composition that persist metastably for up to at least 3 months. Relict feldspars show no change in composition or texture, and equilibration between melt and feldspars might take from a few to tens of millions of years. Partial melting at temperatures well above the solidus (800°C) produces heterogeneous, disequilibrium liquids whose compositions are determined by the diffusive transport properties of the melt and local equilibrium with neighboring mineral phases. Feldspars recrystallize and change composition rapidly. Partial melting and equilibration between liquids and feldspars might take from a few to tens of years (H₂O-saturated conditions) at these temperatures well above the solidus.     

Geochemical and O-isotope constraints on the evolution of lithospheric mantle in the Ross Sea rift area (Antarctica)

Peridotite xenoliths found in Cenozoic alkali basalts of northern Victoria Land, Antarctica, vary from fertile spinel-lherzolite to harzburgite. They often contain glass-bearing pockets formed after primary pyroxenes and spinel. Few samples are composite and consist of depleted spinel lherzolite crosscut by amphibole veins and/or lherzolite in contact with poikilitic wehrlite. Peridotite xenoliths are characterized by negative Al₂O₃–Mg# and TiO₂–Mg# covariations of clino- and orthopyroxenes, low to intermediate HREE concentrations in clinopyroxene, negative Cr–Al trend in spinel, suggesting variable degrees of partial melting. Metasomatic overprint is evidenced by trace element enrichment in clinopyroxene and sporadic increase of Ti–Fe_tot. Preferential Nb, Zr, Sr enrichments in clinopyroxene associated with high Ti–Fe_tot contents constrain the metasomatic agent to be an alkaline basic melt. In composite xenoliths, clinopyroxene REE contents increase next to the veins suggesting metasomatic diffusion of incompatible element. Oxygen isotope data indicate disequilibrium conditions among clinopyroxene, olivine and orthopyroxene. The highest δ¹⁸O values are observed in minerals of the amphibole-bearing xenolith. The δ¹⁸O_cpx correlations with clinopyroxene modal abundance and geochemical parameters (e.g. Mg# and Cr#) suggest a possible influence of partial melting on oxygen isotope composition. Thermobarometric estimates define a geotherm of 80°C/GPa for the refractory lithosphere of NVL, in a pressure range between 1 and 2.5 GPa. Clinopyroxene microlites of melt pockets provide P–T data close to the anhydrous peridotite solidus and confirm that they originated from heating and decompression during transport in the host magma. All these geothermometric data constrain the mantle potential temperature to values of 1250–1350°C, consistent with the occurrence of mantle decompressional melting in a transtensive tectonic regime for the Ross Sea region.