Elevation adjustments of paired natural levees during flooding of the Saskatchewan River

Natural levees control the exchange of water between an alluvial channel and its floodplain, but little is known about the spatial distribution and evolution of levee heights. The summer 2005 flood of the Saskatchewan River (Cumberland Marshes, east‐central Saskatchewan) inundated large areas of floodplain for up to seven weeks, forming prominent new deposits on natural levees along main‐stem channels. Measurements of flood‐deposit thickness and crest heights of 61 levee pairs show that the thickest deposits occur on the lower pre‐flood levee in 80% of the sites, though no clear relationship exists between deposit thickness and magnitude of height difference. Only 16% of the pairs displayed thicker deposits on the higher levee, half of which occurred at sites where relatively clear floodbasin waters re‐entered turbid channels during general flooding. Difference in crest elevation (ΔE) between paired levees is approximately log‐normally distributed, both before and after the flood, though with different mean values. Supplemental observations from tank experiments indicate that during near‐bankfull flows, temporally and spatially variable deposition and erosion occur on levees due to backwater effects associated with nearby channel bars and irregular rises of the channel bed forced by channel extension. During floods, preferential deposition in lows tends to even out crest heights. Copyright © 2009 John Wiley & Sons, Ltd.     

Effects of peat on the shapes of alluvial channels: examples from the Cumberland Marshes, Saskatchewan, Canada

An avulsion of the lower Saskatchewan River in the 1870s inundated a large segment of peat-covered floodplain that subsequently has become aggraded with a broad (500 km²) belt of alluvium deposited by the redirected flow. Routing of water and sediment discharge through the avulsion-affected area has been accomplished mainly by networks of sandy bedded anastomosed channels that have formed, evolved, and abandoned as the alluvial belt prograded down the floodplain slope. These processes continue today, though at a much-reduced rate. New channels, formed by crevassing and basinward extension of distributaries, are initially small and shallow, with bottom elevations situated within the avulsive alluvium but above the pre-avulsion peat (floodplain) surface. Subsequent enlargement and downcutting of many of these channels eventually uncovers the underlying peat layer whose resistance to erosion exerts significant influence on cross-sectional shape and further channel development. Peat-floored channels tend to have rectangular cross-sections, high ratios of average to maximum depth (D/D_max), and a large range of width-to-depth ratios. If the channel continues to enlarge, the peat layer eventually becomes breached, commonly leading to temporarily irregular cross-sections caused by localized scouring at the breach sites. Eventually, the peat layer is completely eroded from the channel floor by undercutting and slumping, after which channel shape becomes governed mainly by other perimeter characteristics. Channels unaffected by peat, either before the peat layer is encountered during early channel development or after it is entirely removed, tend to have low width/depth ratios and a large range of D/D_max values.     

Uranium and Thorium Concentration and Isotopic Composition in Five Glass (BHVO‐2G,BCR‐2G,NKT‐1G,T1‐G,ATHO‐G) and Two Powder (BHVO‐2, BCR‐2) Reference Materials

Here we report uranium and thorium isotopic ratios and elemental concentrations measured in solid reference materials from the USGS (BHVO‐2G, BCR‐2G, NKT‐1G), as well as those from the MPI‐DING series (T1‐G, ATHO‐G). Specifically created for microanalysis, these naturally‐sourced glasses were fused from rock powders. They cover a range of compositions, elemental concentrations and expected isotopic ratios. The U‐Th isotopic ratios of two powdered source materials (BCR‐2, BHVO‐2) were also characterised. These new measurements via multi‐collector thermal ionisation mass spectrometry and multi‐collector inductively coupled plasma‐mass spectrometry can now be used to assess the relative performance of techniques and facilitate comparison of U‐Th data amongst laboratories in the geoscience community for in situ and bulk analyses.     

Pathogenicity of vibrios in fish: An overview

Bacteria of the genus Vibrio are ubiquitously distributed in the marine environment. Due to the rapid expansion of intensive mariculture and the consequent deterioration of culture conditions, more and more Vibrio spp. have been recognized as pathogenic agents in outbreaks of vibriosis, a serious epizootic disease affecting most wild and farmed fish species worldwide, which has become the most important limiting factor for the development of intensive mariculture industry. Attempts have been made to understand the pathogenicity of vibrios in host fish with the ultimate aim of elucidating the best means for disease control. After an extensive literature survey of the recent advances in the field of fish vibriosis, the pathological changes, virulence factors and associated potential pathogenic mechanisms, transmission routes and related environmental factors involved in outbreak of vibriosis, as well as the controlling strategies are reviewed in the present paper.     

On the properties of strange modes

Properties of the so-called strange modes occurring in linear stability calculations of stellar models are discussed. The behaviour of these modes is compared for two different sets of stellar models, for very massive zero-age main-sequence stars and for luminous hydrogen-deficient stars, both with high luminosity-to-mass ratios. We have found that the peculiar behaviour of the frequencies of the strange modes with the change of a control parameter is caused by the pulsation amplitude of a particular eigenmode being strongly confined to the outer part of the envelope, around the density inversion zone. The frequency of a strange mode changes because the depth of the confinement zone changes with the control parameter. Weakly non-adiabatic strange modes tend to be overstable because the amplitude confinement quenches the effect of radiative damping. On the other hand, extremely non-adiabatic strange modes become overstable because the perturbation of radiation force (gradient of radiation pressure) provides a restoring force that can be out of phase with the density perturbation. We discuss this mechanism by using a plane-parallel two-zone model.     

The impact of hurricanes on sedimenting particulate matter in the semi-arid Bahía de La Paz,Gulf of California

From 2002 through 2004, time-series sediment trap samples were collected from a depth of 410 m in Cuenca Alfonso, Bahía de La Paz, on the SW coast of the Gulf of California. The instrument recorded the impact of the local passage of hurricanes “Ignacio” (24–26 August) and “Marty” (21–23 September) in 2003. These two events accounted for 82% of the total rainfall measured in 2003, equivalent to the annual average precipitation in years without hurricanes. Mean total mass fluxes (TMFs) of 2.88 and 3.58 g m⁻² d⁻¹ were measured during the week of each hurricane as well as the following week. This may have been enough to produce a lamina in the underlying sediment with characteristics peculiar to such events. The terrigenous component was particularly abundant, with notably higher concentrations of Fe, Sc, Co and Cs and REEs. In contrast, TMFs throughout 2002–2004 (excluding the hurricane periods) averaged only 0.73 g m⁻² d⁻¹ and had a larger marine biogenic component. The extraordinary elemental fluxes during the 29 days of hurricane-influenced sedimentation represented a great proportion of the totals over an entire “normal” year: Co (67.8%) >Sc (62.6) >Fe (59.6) >Cs (53.4)>Lu (51.5)>La (51.3)>Yb (51.0)>Ce (49.5) >Tb (48.4) >Sm (44.7)>Cr (36.5) >Ca (31.0)>Eu (25.4%). The terrigenous fraction was calculated using (a) TMF minus the sum of CaCO₃, biogenic silica and organic matter and (b) the ratio of Sc in the trap samples to the average in the Earth's crust. The latter was consistently smaller, but the two methods offered similar results following hurricanes (78% vs. 63%, respectively). For normal sedimentation, however, the difference method yielded values twice as large as the Sc method (58% vs. 30%) This suggests that the mineralogy of the terrigenous fraction may also vary, with unsorted dessert soil being carried to sea by the powerful flash floods associated with hurricanes. Eolian supply of particles, particularly Sc-free quartz grains, possibly from beyond the limited fluvial drainage basin, apparently dominates normal sedimentation.     

The increasing CO2 concentration in the atmosphere and its implication on agricultural productivity II. Effects through CO2-induced climatic change

In a prior paper (Part I), the point was made that, assuming an unchanged climate, water use efficiency in agricultural crop production will likely be favored by the increase in CO₂ concentration projected to occur within the next half century. Since climatic changeis likely to result from the CO₂ concentration increase, its possible impacts on agricultural productivity must also be considered. An attempt to do so, using the Great Plains region of North America as a case study, is reported in this paper (Part II). A number of climatic models predict significant increases in surface temperature. Manabe and Wetherald's (1980) model provides the most specific projections for a hypothetical Northern hemisphere continent. That model also predicts an intensification of the hydrologic cycle with rainfall distribution altered so that some zones will receive more and some less as a result of a doubling in the atmospheric CO₂ concentration. The zone between 37 and 47° N latitude will suffer a reduction in availability of soil moisture. A number of regression models of grain yield as a function of temperature and precipitation have been used to anticipate the impacts of the projected climatic changes. The value of this approach is questioned. An alternative approach - the study of the migration of major agricultural crops across strong climatic gradients - is proposed. Changes in the geographical distribution of the hard red winter wheat zone in North America provide an example. The point is also made that factorscurrently limiting food production must be considered in order to predict the possible impacts of any given climatic change. In the central Great Plains today, the energy consumed by evapotranspiration often exceeds that supplied by net radiation since sensible heat advection from dryer regions to the south and west provides a major additional input of energy. If, as models project, the excess of precipitation over evaporation increases south of 37° N, the advection of sensible heat and, hence, the rates of evapotranspiration and degree of water stress on growing plants could be reduced in the adjacent regions to the north. Published as Paper No. 6123, Journal Series, Nebraska Agricultural Experiment Station. The work reported was conducted under Regional Research Project 11-033 and Nebraska Agricultural Station Project 11-049. George Holmes Professor of Agricultural Meteorology, Center for Agricultural Meteorology and Climatology, Institute of Agriculture and Natural Resources, University of Nebraska, Lincoln, Nebraska, 68583-0728.     

SOIL VARIATION ON NORTH AND SOUTH SLOPE CATENAS ON A KAME IN SOUTHEAST WISCONSIN

Soils from two catenas on north-and south-facing slopes of a kame were analyzed to determine the effect of lithology, topography, and microclimate on profile development. In loess on the north-facing slope, where microclimate favored CaCO₃ dissolution and clay translocation, pedogenesis was rapid and an A-E-Bt-C profile developed. In contrast, an A-Bt-C profile developed on the south-facing slope. In gravel where limestone/dolostone dissolution was slow, A-C profiles were found and CaCO₃ was depleted to a ≤ 25-cm depth, 20± cm less than reported for similar Michigan soils. Slopewash and runoff are inferred to have caused silt accumulations and greater infiltration at the base of ≥ 20° slopes, resulting in a thicker solum in foot-and toe-slope positions, whereas on slopes of ≤ 7° infiltration and interflow are the dominant processes, resulting in a thicker solum on the transportational midslope. The differences in soil profile development are attributed to sediment facies changes at 25- to 50-cm depth and resulting groundwater movement. [Key words: soil development, soil spatial variability, kame slope catena, Wisconsin.]