Petrographic features of a high-temperature granite just newly solidified magma at the Kakkonda geothermal field, Japan

A 3729-m-deep geothermal research well, WD-1a, provides us with a unique opportunity to study initial petrographic features of a high-temperature granite just after solidification of magma. The well succeeded in collecting three spot-cores of the Kakkonda Granite that is a pluton emplaced at a shallow depth and regarded as a heat source of the active Kakkonda geothermal system. The core samples were collected at the present formation temperatures of 370, 410 and over 500°C. These samples are granodiorite to tonalite consisting mainly of plagioclase, quartz, hornblende, biotite and K-feldspar. A sample collected at a formation temperature of over 500°C possesses the following remarkable petrographic features compared to the other two samples. Interstitial spaces are not completely sealed. K-feldspar exhibits no perthite by the exsolution of albite lamella. Quartz includes glassy melt inclusions without devitrification. Hornblende is less intensively altered to actinolite, and biotite is not altered. This study directly confirmed that perthite in K-feldspar is a recrystallization texture formed at 410–500°C based on a comparison of the in situ temperatures of the samples. Chemical compositions of minerals were analyzed to compare temperatures determined from geothermometers in several publications to the in situ temperatures of the samples.     

Heterogeneous structure of western Nankai seismogenic zone deduced by multichannel reflection data and wide-angle seismic data

The 1946 Nankai earthquake (Ms=8.2) at the forearc region of the western Nankai Trough showed slow slip deformation off Cape Muroto, which did not propagate until the western end of the Nankai seismogenic zone. New seismic investigations show a low-velocity layer (LVL) on the subducting oceanic crust in the coseismic area. Two prestack depth-migrated sections show reflectivity events in the clay-rich boundary layer on the oceanic crust. Narrowly spaced imbricated slices develop in the nonrupture area. The reflective boundary layer indicates probably that underplating develops in the nonrupture area rather than the coseismic area. It is suggested that the friction is larger in the nonrupture area than the coseismic area because of the lack of LVL on the oceanic crust, the well developed underplating and the narrowly spaced imbricated thrusts in the nonrupture area. The topographic high of the oceanic crust with about 50 km width and maximum 3 km height is also revealed and is related to bending and thickening of the oceanic crust, the well developed underplating and the narn spaced imbricated thrusts in the nonrupture area. These structural characters may be the reason why the slow slip deformation did not propagate until the western end of the Nankai seismogenic zone and toward the trough side.     

Magnetic and electric field observations during the 2000 activity of Miyake-jima volcano, Central Japan

Magnetic and electric field variations associated with the 2000 eruption of Miyake-jima volcano are summarized. For about 1 week prior to the July 8 phreatic explosion, significant changes in the total intensity were observed at a few stations, which indicated uprising of a demagnetized area from a depth of 2 km towards the summit: this non-magnetic source can be regarded as a vacant space itself. Electric and magnetic field variations were observed simultaneously associated with the tilt-step event, which was the abrupt (∼50 s) inflation at a few km depth within the volcano followed by gradual recovery (∼several hours). The electric field is ascribed to the electrokinetic effect most probably due to forced injection of fluids from the source, while the magnetic field to the piezomagnetic effect due to increased pressure. Large magnetic variations amounting to a few tens of nT were observed at several stations since July 8, and they turned almost flat after the August 18 largest eruption. Magnetic changes are explained mostly by the vanishing of magnetic mass in the summit and additionally by the thermal demagnetization at a rather shallow depth. A large increase in the self-potential by 130 mV was also observed near the summit caldera associated with the August 18 eruption, which suggests that the hydrothermal circulation system sustained within the volcano for the past more than 10 years was destroyed by this eruption.     

Clean and safe supply of fish and shellfish to clear the HACCP regulation by use of clean and cold deep ocean water in Rausu, Hokkaido, Japan

For the supply of fish and shellfish to consumers in fresh condition, clean handling after catch from the sea is essential. According to HACCP （Hazard Analysis and Critical Control Points）, it is important to meet such requirement by keeping fish and shellfish under a certain low temperature and clean conditions after catching. The deep ocean water （DOW） characterized by low temperature and cleanliness has been chosen for fish and shellfish handlings, particularly for salmon, cod, and sea urchin in Town ＇Rausu＇ in Hokkaido, Japan. DOW below 2.9℃ of an amount of nearly 5 000 m^3 is planned to be pumped up every day from a depth of about 350 m, and temporarily stored in a large simulated tank on land. DOW is then supplied to fish boats through hydrants distributed throughout the harbor and used for keeping salmon in clean and cold conditions. Ice made from DOW is also used for lowering temperature if necessary. DOW and ice made from DOW are also used during the transportation of fish and shellfish. The entire system is scheduled to be completed by the summer of 2005.     

Dynamic features of Io's extended sodium distributions

We report on two-dimensional imaging observations of D-line emissions from the extended distribution of iogenic sodium atoms with two fields of view (±20 RJ (narrow FOV) and ±400 RJ (wide FOV)) simultaneously by using a portable small telescope or camera lens. We derived dynamic feature of the band-shaped and spray-shaped distributions near Io's orbit by means of continuous observation. The observations confirm the phenomenological behavior of the sodium cloud on two spatial scales, as previously observed by Pilcher et al. [Pilcher, C.B., Smyth, W.H., Combi, M.R., Fertel, J.H., 1984. Astrophys. J. 287, 427-444], Schneider et al. [Schneider, N.M., Trauger, J.T., Wilson, J.K., Brown, D.I., Evans, R.W., Shemansky, D.E., 1991. Science 253, 1394-1397], and Mendillo et al. [Mendillo, M., Baumgartner, J., Flynn, B., Hughes, W.S., 1990. Nature 348, 312-314]. We also confirm an elongated oval emission distribution of the sodium nebula and derivation of its detailed east-west asymmetry depending on Io's phase angle, which was first noted by Flynn et al. [Flynn, B., Mendillo, M., Baumgartner, J., 1994. J. Geophys. Res. 99, 8403-8409]. We then did model analyses to investigate the source process for sodium atoms and the dynamics behind their distribution. We conclude that the essential of molecular ion mechanisms to the band-shaped distribution is in agreement with Wilson and Schneider [Wilson, J.K., Schneider, N.M., 1999. J. Geophys. Res. 104, 16567-16583]. We differ from Wilson et al. [Wilson, J.K., Mendillo, M., Baumgartner, J., Schneider, N.M., Trauger, J.T., Flynn, B., 2002. Icarus 157, 476-489] in finding that charge exchange process contributes more to the spray-shaped distribution and sodium nebula than sputtering does. These results derived the double-peaked velocity distribution of released sodium atoms, and re-confirmed the source rates in agreement with past studies.     

A Si/CdTe Compton Camera for gamma-ray lens experiment

Cadmium telluride (CdTe) and cadmium zinc telluride (CdZnTe) have been regarded as promising semiconductor materials for hard X-ray and γ-ray detection. However, a considerable amount of charge loss in these detectors results in a reduced energy resolution. We have achieved a significant improvement in the spectral properties by forming the Schottky junction on the Te side of the CdTe wafer. With the further reduction of leakage current by an adoption of guard ring structure, we have demonstrated a CdTe pixel detector with high energy resolution and full charge collection capabilty. The detector has a pixel size of a few mm and a thickness of 0.5 $-$ 1 mm. We apply this high resolution detector to a new silicon and CdTe Compton Camera which features high angular resolution. We also describe a concept of the stack detector which consists of many thin CdTe layers and provides sufficient efficiency for hard X-rays and gamma-rays up to several hundred keV maintaining good energy resolution. A narrow-FOV Compton telescope can be realized by installing a Si/CdTe Compton Camera inside the deep well of an active shield. This configuration is very suitable as focal plane detector for future focusing gamma-ray missions.     

Borehole water and hydrologic model around the Nojima fault, SW Japan

The active fault drilling at Nojima Hirabayashi after the 1995 Hyogoken-nanbu (Kobe) earthquake (M_JMA = 7.2) provides us with a unique opportunity to investigate subsurface fault structure and the in-situ properties of fault and fluid. The borehole intersected the fault gouge of the Nojima fault at a depth interval of 623 m to 625 m. The lithology is mostly Cretaceous granodiorite with some porphyry dikes.The fault core is highly permeable due to fracturing. The borehole water was sampled in 1996 and 2000 from the depth interval between 630 and 650 m, just below the fault core. The chemical and isotopic compositions were analyzed. Carbon and oxygen isotope ratios of carbonates from the fault core were analyzed to estimate the origin of fluid.The following conclusions were obtained. (1) The ionic and isotopic compositions of borehole water did not change from 1996 to 2000. They are mostly derived from local ground water as mentioned by Sato and Takahashi [Sato, T., Takahashi, M., 2000. Chemical and isotopic compositions of groundwater obtained from the Hirabayashi well. Geological Survey of Japan Interim Report No. EQ/00/1, 187–192.]. (2) Geochemical speciation revealed that the borehole water was derived from a relatively deep reservoir, which may be situated at a depth of 3 to 4 km where the temperature is about 80–90 °C. (3) The shallower part of the Nojima fault (shallower than the reservoir depth) has not been healed from the hydrological viewpoints 5 years after the event, in contrast to the rapid healing detected by S wave splitting [Tadokoro, K., Ando, M., 2002. Evidence for rapid fault healing derived from temporal changes in S wave splitting, Geophys. Res. Lett., 29, 10.1029/2001GL013644.]. (4) Precipitation of calcite from the present borehole water since drilling supports the idea of precipitation of some calcite in coseismic hydraulic fractures in the fault core [Boullier, A-M., Fujimoto, K., Ohtani, T., Roman-Ross, G., Lewin, E., Ito, H., Pezard, P., Ildefonse, B., 2004. Textural evidence for recent co-seismic circulation of fluids in the Nojima fault zone, Awaji Island, Japan., Tectonophysics, 378, 165–181.]. (5) Carbon and oxygen isotope ratios of calcite indicated that the meteoric water flux had been localized at the fault core. (6) A difference in the carbon isotope ratio between the footwall and the hanging wall suggests that the fault has been acted as a hydrologic barrier, although the permeability along the fault is still high.     

Fault configuration produced by initial arc rifting in the Parece Vela Basin as deduced from seismic reflection data

Abstract   The Parece Vela Basin (PVB), which is a currently inactive back-arc basin of the Philippine Sea Plate, was formed by separation between the Izu-Ogasawara Arc (IOA) and the Kyushu-Palau Ridge (KPR). Elucidating the marks of the past back-arc opening and rifting is important for investigation of its crustal structure. To image its fault configurations and crustal deformation, pre-stack depth migration to multichannel seismic reflection was applied and data obtained by the Japan Agency for Marine-Earth Science and Technology and Metal Mining Agency of Japan and Japan National Oil Corporation (Japan Oil, Gas and Metals National Corporation). Salient results for the pre-stack depth-migrated sections are: (i) deep reflectors exist around the eastern margin of KPR and at the western margin of IOA down to 8 km depth; and (ii) normal fault zones distributed at the eastern margin of the KPR (Fault zone A) and the western margin of the IOA (Fault zone B) have a total displacement of greater than 500 m associated with synrift sediments. Additional normal faults (Fault zone C) exist 20 km east of the Fault zone B. They are covered with sediment, which indicates deposition of recent volcanic products in the IOA. According to those results: (i) the fault displacement of more than 500 m with respect to initial rifting was approximately asymmetric at 25 Ma based on PSDM profiles; and (ii) the faults had reactivated after 23 Ma, based on the age of deformed sediments obtained from past ocean drillings. The age of the base sediments corresponds to those of spreading and rotation after rifting in the PVB. Fault zone C is covered with thick and not deformed volcanogenic sediments from the IOA, which suggests that the fault is inactive.