Regional subglacial quarrying and abrasion below hard-bedded palaeo-ice streams crossing the Shield–Palaeozoic boundary of central Canada: the importance of substrate control

Three-dimensional surface visualization models derived from high-resolution LiDAR data provide new information about the type and scale of erosional processes below Late Wisconsin palaeo-ice streams traversing the boundary between Canadian Shield crystalline rocks with offlapping Palaeozoic limestones in central Ontario. The hard bed is directly analogous to that found below ice streams in East Antarctica and East Greenland and provides insight into the effects of abrupt changes in substrate type on subglacial processes. Erosion of hard crystalline Canadian Shield rock was largely ineffectual consisting of areal abrasion of rounded whalebacks and local lee side plucking. In contrast, fast flow over the strike of gently dipping well-bedded and jointed Palaeozoic limestones cut large flow-parallel grooves and ridges akin to mega-scale glacial lineations reflecting intense abrasion below narrow streams of subglacial debris dominated by hard crystalline Shield clasts (erodents). Regionally extensive plucking of structurally weak, well-jointed and bedded limestone produced large volumes of rubbly carbonate debris leaving a 25-km-wide belt of uncontrolled hummocky rubble terrain (long known as the Dummer Moraine in Southern Ontario) some 350 km long and locally as much as 10 m thick. Subglacial plucking and abrasion under fast flowing ice were highly effective in stripping limestone cover rocks from Precambrian basement, and over many glacial cycles, may have played a role in the location and excavation of numerous large and deep lake basins around the Shield–Palaeozoic boundary zone in North America.     

铁同位素的MC-ICP-MS测定方法与地质标准物质的铁同位素组成

详细报道了在低分辨和高分辨模式下运用MC-ICP-MS进行Fe同位素比值高精度测试的方法,对Fe同位素测定过程中谱峰干扰、基质效应、浓度效应、仪器测试的长期重现性等问题进行了评估,并对两种运行模式的测试结果进行了对比.在95%的可信度范围内,所建方法的外部精度优于0.5ε/ainu,达到国际同类实验室的先进水平,并且低分辨和高分辨两种模式下获得的Fe同位素测试结果是一致的.在此基础上对国家地质标准物质GBW07105(玄武岩)和GBW 07111(花岗闪长岩)进行了Fe同位素测定.相对于Fe同位素国际标样IRMM-014,GBW07105的Fe同位素成分为:ε57Fe=1.9±0.3(20),ε56Fe=1.3±0.2(2σ),ε57/56Fe=0.6±0.1(2σ);GBW 07111的Fe同位素成分为:ε57Fe=1.8±0.4(2σ),ε56Fe=1.2±0.2(2σ),ε57/56Fe=0.6±0.1(2σ).     

Efficacy of laser cleaning in the removal of biological patina on the volcanic scoria of the rock-hewn churches of Lalibela,Ethiopia

The Lalibela rock-hewn churches are one of the most important religious pilgrimage sites in Ethiopia. These churches are carved from the scoriaceous basalt rock substrate, which has been exposed to attack by biological agents with significant loss of surface material. Particularly, the widespread growth of lichens and other microorganisms on the carved surfaces of the churches has proven to represent a substantial threat for the preservation of the site. In this study, laboratory tests have been conducted to assess the feasibility of using laser technology as an efficient cleaning method of biological patina from polymineralic stone substrates. Multi-analytical techniques were applied for the characterization of the stone samples collected from two of the Lalibela churches: Bete Giyorgis and Bete Amanuel. Stone samples artificially inoculated with bacteria, yeast, fungi isolates, and lichen-encrusted samples were laser cleaned using UV and IR laser wavelengths. The high content of Fe and Ti oxides and the high porosity have made the stone surfaces easily susceptible to low-energy laser treatment. Results indicate that laser cleaning can be applied to polymineralic lithotypes and UV irradiation can successfully remove lichen colonies. Further studies need to be conducted to optimize the laser procedure in polymineralic, high porosity stones.     

Middle Paleolithic occupation on a Marine Isotope Stage 5 lakeshore in the Nefud Desert,Saudi Arabia

Major hydrological variations associated with glacial and interglacial climates in North Africa and the Levant have been related to Middle Paleolithic occupations and dispersals, but suitable archaeological sites to explore such relationships are rare on the Arabian Peninsula. Here we report the discovery of Middle Paleolithic assemblages in the Nefud Desert of northern Arabia associated with stratified deposits dated to 75,000 years ago. The site is located in close proximity to a substantial relict lake and indicates that Middle Paleolithic hominins penetrated deeply into the Arabian Peninsula to inhabit landscapes vegetated by grasses and some trees. Our discovery supports the hypothesis of range expansion by Middle Paleolithic populations into Arabia during the final humid phase of Marine Isotope Stage 5, when environmental conditions were still favorable.     

Finite Element Solvers for Biot’s Poroelasticity Equations in Porous Media

We study and compare five different combinations of finite element spaces for approximating the coupled flow and solid deformation system, so-called Biot’s equations. The permeability and porosity fields are heterogeneous and depend on solid displacement and fluid pressure. We provide detailed comparisons among the continuous Galerkin, discontinuous Galerkin, enriched Galerkin, and two types of mixed finite element methods. Several advantages and disadvantages for each of the above techniques are investigated by comparing local mass conservation properties, the accuracy of the flux approximation, number of degrees of freedom (DOF), and wall and CPU times. Three-field formulation methods with fluid velocity as an additional primary variable generally require a larger number of DOF, longer wall and CPU times, and a greater number of iterations in the linear solver in order to converge. The two-field formulation, a combination of continuous and enriched Galerkin function space, requires the fewest DOF among the methods that conserve local mass. Moreover, our results illustrate that three out of the five methods conserve local mass and produce similar flux approximations when conductivity alteration is included. These comparisons of the key performance indicators of different combinations of finite element methods can be utilized to choose the preferred method based on the required accuracy and the available computational resources.

     

新疆西天山高硫化型京希-伊尔曼德金矿床的识别标志及其找矿意义

经过详细的野外地质勘查、热液蚀变及蚀变矿物学研究，流体包裹体和同位素研究，首次将西天山京希－伊尔曼德金矿床确定为高硫化型浅成低温热液金矿床。该矿床的主要识别标志为：发育以多孔状石英为特征的硅化蚀变带和高级泥化蚀变带；成矿流体性质为低盐度[W(NaCl)为0.3-4.2%]、低pH值（3－4）和高氧化态；氧同位素δ（^18O)为1.7 ‰-4.3‰,δ(D)为－60‰--80‰。金主要富集在高级泥化带和中心硅化蚀变带内。系统研究和总结了成矿地质－地球化学制约因素以及区域、靶区和勘探区尺度的找矿标志。     

Continental growth and reworking on the edge of the Columbia and Rodinia supercontinents; 1.86–0.9 Ga accretionary orogeny in southwest Fennoscandia

Geological history from the late Palaeoproterozoic to early Neoproterozoic is dominated by the formation of the supercontinent Columbia, and its break-up and re-amalgamation into the next supercontinent, Rodinia. On a global scale, major orogenic events have been tied to the formation of either of these supercontinents, and records of extension are commonly linked to break-up events. Presented here is a synopsis of the geological evolution of southwest Fennoscandia during the ca. 1.9–0.9 Ga period. This region records a protracted history of continental growth and reworking in a long-lived accretionary orogen. Three major periods of continental growth are defined by the Transscandinavian Igneous Belt (1.86–1.66 Ga), Gothian (1.66–1.52 Ga), and Telemarkian (1.52–1.48 Ga) domains. The 1.47–1.38 Ga Hallandian–Danopolonian period featured reorganization of the subduction zone and over-riding plates, with limited evidence for continental collision. During the subsequent 1.38–1.15 Ga interval, the region is interpreted as being located inboard of a convergent margin that is not preserved today and hosted magmatism and sedimentation related to inboard extensional events. The 1.15–0.9 Ga period is host to Sveconorwegian orogenesis that marks the end of this long-lived accretionary orogen and features significant crustal deformation, metamorphism, and magmatism. Collision of an indenter, typically Amazonia, is commonly inferred for the cause of widespread Sveconorwegian orogenesis, but this remains inconclusive. An alternative is that orogenesis merely represents subduction, terrane accretion, crustal thickening, and burial and exhumation of continental crust, along an accretionary margin. During the Mesoproterozoic, southwest Fennoscandia was part of a much larger accretionary orogen that grew on the edge of the Columbia supercontinent and included Laurentia and Amazonia amongst other cratons. The chain of convergent margins along the western Pacific is the best analogue for this setting of Proterozoic crustal growth and tectonism.     

Analyses on granular mass movement mechanics and deformation with distinct element numerical modeling: implications for large-scale rock and debris avalanches

A large-scale avalanche of Earth material is modeled here as a granular flow using a distinct element numerical model PFC ^2D. Such failures occur in a variety of geological settings and are known to occur frequently over geologic time-scales transporting significant volumes of material basinward. Despite this, they remain poorly understood. The model used here begins with a listric failure, typical of the flank collapse of a volcanic cone, and describes the movement of an assembly of several thousand particles from failure to deposition. Within the model, each particle possesses its own material properties and interacts with its immediate neighbors and/or the basal boundary during emplacement. The general mechanics of the particle assembly are observed by monitoring the stresses, displacements, and velocities of distinct sections of the avalanche body. We monitor the avalanches’ energy regime (e.g., gravitational influence, energy dissipation by friction, kinetic energy evolution, and avalanche body strain). The addition of colored markers of varying geometry to the pre-failure avalanche was also used to make qualitative observations on the internal deformation that occurs during avalanche emplacement. A general stretching and thinning of the avalanche is observed. Monitoring of vertical and horizontal variations in stress, strain, porosity, and relative particle stability indicate that the lower more proximal sections of the avalanche are subject to higher stresses. These stresses are observed to be most significant during the initial phases of failure but decline thereafter; a situation likely to be conducive to block fragmentation and in developing a basal shear layer in real-world events. The model also shows how an avalanche which is initially influenced purely by gravity (potential energy) develops into a fully flowing assemblage as downslope momentum is gained and kinetic energy increases. The horizontal transition where the failure meets the run-out surface is recognized as a key area in emplacement evolution. The model has particular relevance to volcanic flank collapses and consequently the implications of the model to these types of failure and the geological products that result are considered in detail although the model is relevant to any form of large-scale rock or debris avalanche.     

Géomorphologie de Tromelin,océan Indien

Tromelin is a small coral reef island (1 km²) located in the Indian Ocean, approximately 440 km east of Madagascar and 580 km north of La Réunion. Despite the presence of a permanent Météo France weather station on Tromelin since the 1950 s, a detailed geomorhological study of the island has never been undertaken. In this paper, we describe results from the 2008 field season, which enabled us to map and describe seven geomorphological zones on the atoll. (1) Tromelin's bathymetry is characterised by a pronounced submarine slope, which attains depths of 1000 m at only 2.5 km from the island's coastline. This geomorphology is typical of volcanic hotspots. (2) A coral platform borders the emerged crown of the island. This platform is exposed at low tide and has been fashioned in an ancient Pleistocene substratum. The substratum has been eroded by abrasive marine action to its present shape since the stabilisation of relative sea level around 6000 years ago. Erosion of the reef yields most of the biogenic sediment supply to the island. (3) The upper foreshore is characterised by outcrops of beachrock. These formations show a stratfication in slabs and dip gently towards the sea in the same manner as the contemporary clastic sediments. (4) Tromelin's beaches are divided into three sub-units, which reflect the different energy dynamics around the island, in addition to the transfer of sediment from the windward to the leeward side: (i) the southern storm beaches are characterised by coral blocks reworked during episodic high-energy events; they form boulder ramparts. Four perched rampart ridges have been recorded at ∼1 m, ∼3 m, ∼4.5 m and ∼7 m above mean sea level; (ii) transitional beaches are observed between the south and the north, constituting storm blocks and coarse sands and gravels; and (iii) sandy beaches are noted on the northern leeward side, comprising rounded gravels and coarse sands. The northern tip of the island is characterised by a sand spit (∼125 × ∼225 m), whose geometry varies based on the seasonal and meteo-marine contexts. (5) On Tromelin, a number of dune formations are observed. These are best developed in the north of the island due to the south-north translation of clastic sediments by aeolian wind action, and the trapping of sands by the well-developed vegetation. The height of the dunes varies between 10 cm (the southern micro-dunes) to 250 cm in the Northeast of Tromelin. (6) Exceptional waves have deposited storm tracts up to 250 m from the foreshore zone, comprising coarse gravels and coral blocks. The storm tract deposits are most prevalent on the windward side of the island, due not only to the high-energy dynamics, but also to the absence of vegetation cover in this area. (7) The southern depression covers an area of ∼40,000 m². At its lowest point it is only 1.2 m above sea level.