松潘—甘孜造山带中丹巴地区变质岩的流体包裹体研究

对丹巴地区动热变质岩石英中的流体包裹体研究表明，第一类型包裹体为高密度CO2包裹体，与深层滑脱作用密切相关，其温度、压力可代表变质峰期的温压条件。第二类型包裹体为CO2－H2O包裹体，H2O含量增加，与变质峰期后的抬升作用有关。第三类型包裹体为NaCl－H2O包裹体，以H2O为主，与抬升作用引起的退变质作用有关。其形成温度依次降低，说明它们是在变质作用的不同阶段捕获的。     

高温高压下水岩界面反应与金的迁移富集

高温高压下水岩界面反应与金的迁移富集王玉荣阚小凤王志强（中国科学院广州地球化学研究所，广州５１０６４０）关键词水岩界面反应自发电池实验地球化学本实验以哈达门沟［１］及东坪金矿［２］为地质背景，研究钾长石岩中金矿化富集的物理化学条件。该区金矿既与早期变...     

Important Geological Factors Controlling the Formation of Gold Deposits in East China

The major gold deposits in east China are characterized by their occurrence in pre-Cambrian host metamorphic rocks,restriction in some specific stratigraphic-structural terranes,tendentious localization in ductile or ductile-brittle shear zones,association with the syntexis type granitoids,and significant remobilization,superimposition and enrichment by the later stage Mesozoic tectono-magmatic activities.     

中国大陆岩石圈的化学元素丰度

中国大陆岩石圈模型的面积９６０万ｋｍ＾２，平均厚度１１０ｋｍ，体积１０．６亿ｋｍ＾３，岩石平均密度３．０６４ｇ／ｃｍ＾３、总质量３．２４５×１０＾１８ｔ。在中国大陆地壳元素丰度的基础上，作者首次求出中国大陆岩石圈的元素丰度值。其质量丰度，厚子丰度和相对丰度列于表１。此外还按１０类（７８种）元素分别讨论中国大陆岩石圈的主要化学特征。     

煤矸石制作轻质莫来石砖研究

本文研究了利用煤矸石生产高档轻质莫来石砖的可行性，实验研究表明，在煅烧后的煤矸石中加入部分工业氧化铝粉，一起混磨至８００目筛余小于５％，再经加有机质成型和１５５０℃×５小时煅烧，可制成物相及各种性能指标达到从德国进口轻质莫来石砖的制品。     

应用6S模式对EOS-MODIS可见光到中红外波段的大气订正

应用6S辐射传输模式对MODIS可见光到中红外波段的反射率进行大气订正，订正过程分两步进行:首先设定地表为朗伯体，再应用二向反射模型BRDF进行订正，订正结果与美国MODIS研究组应用MAS实验结果进行比较表明，两者变化趋势是一致的；经过臭氧、水汽、气溶胶等散射吸收订正，对于一定范围的反射率，大气订正使植被区红光波段反射率ρ₁降低、近红外波段反射率ρ₂增加，蓝光波段反射率ρ₃降低；大气订正后，归一化植被指数I_NDV较大气订正前有所增加，增加的最大值为0.104，抗土壤-大气植被指数IEV值略有减小，减小的最大值为0.005。     

Revised runoff curve number for runoff prediction in the Loess Plateau of China

The soil conservation service (now Natural Resources Conservation Service) Curve Number (SCS-CN), one of the most commonly used methods for surface runoff prediction. The runoff calculated by this method was very sensitive to CN values. In this study, CN values were calculated by both arithmetic mean (CN_C) and least square fit method (CN_F) using observed rainfall-runoff data from 43 sites in the Loess Plateau region, which are considerably different from the CN₂ values obtained from the USDA-SCS handbook table (CN_T). The results showed that using CN_C instead of CN_T for each watershed produce little improvement, while replacing CN_T with CN_F improves the performance of the original SCS-CN method, but still performs poorly in most study sites. This is mainly due to the SCS-CN method using a constant CN value and discounting of the temporal variation in rainfall-runoff process. Therefore, three factors—soil moisture, rainfall depth and intensity—affecting the surface runoff variability are considered to reflect the variation of CN in each watershed, and a new CN value was developed. The reliability of the proposed method was tested with data from 38 watersheds, and then applied to the remaining five typical watersheds using the optimized parameters. The results indicated that the proposed method, which boosted the model efficiencies to 81.83% and 74.23% during calibration and validation cases, respectively, performed better than the original SCS-CN and the Shi and Wang (2020b) method, a modified SCS-CN method based on tabulated CN value. Thus, the proposed method incorporating the influence of the temporal variability of soil moisture, rainfall depth, and intensity factors suggests an accurate runoff prediction for general applications under different hydrological and climatic conditions on the Loess Plateau region.