Landfill site selection and landfill liner design for Ankara, Turkey

Considering the high population growth rate of Ankara, it is inevitable that landfill(s) will be required in the area in the near future to sustain the sanitary waste disposal needs of the city. The main scope of this study is to select alternative landfill sites for Ankara based on the growing trends of Ankara toward the northwest, particularly toward the Sincan municipality, and to eventually select the best alternative through utilizing multi-criteria decision making. Landfill site selection was carried out utilizing Geographic Information System (GIS) and Multi-Criteria Decision Analysis. A number of criteria, namely, settlement, slope, proximity to roads, geology, availability and proximity of landfill containment material (i.e., clay for composite lining system), suitability for agriculture, erosion, vegetation cover and lineament system were gathered in a GIS environment. Each criterion was assigned a weight value by applying the Pairwise Comparison Method and the Analytical Hierarchy Method. In order to choose the best alternative, the Technique for Order Preference by Similarity to the Ideal Solution, which is regarded as an ideal point method, was applied and a landfill site was selected. The geotechnical properties of the so-called “Ankara clay” that shows widespread distribution in Ankara were reviewed and assessed for its suitability as a compacted clay liner.     

Water table fluctuation analyses and associated empirical approach to predict spatial distribution of water table at Yeşilköy/AgiosAndronikos aquifer

The groundwater of the deep Ye?ilköy aquifer is the only water resource for agricultural and domestic consumption at the Karpaz Peninsula of Cyprus, which stretches approximately 100 km from the northeast of capital Nicosia to the northern tip of Cyprus. During the last decade, over-pumping and following dry periods have depleted the groundwater resources and the water surface elevation of the aquifer has dropped. The aim of this study is to understand the behavior of the Ye?ilköy aquifer in the last decade for the proper management of groundwater resources. This has been achieved based on well survey and field survey studies, monitoring programs followed by pumping tests, and safe yield analysis. Most of the research effort has been focused on field and well survey studies to quantify agricultural water consumption and abstraction rates from the aquifer. A long-term groundwater level monitoring program, short-term continuous groundwater monitoring and pumping tests provided information for the regression analyses while deriving a sixth order polynomial relationship between the period parameter and the head parameter. The equation was helpful to predict the short-term behavior of the water level when the present hydrogeological conditions prevail. The pumping test results satisfied the hydraulic properties of calcarenite formation yielding T = 1,782 m²/day and S = 0.0012. The results of safe yield analysis show that the annual deficit of the aquifer is 0.496 million cubic meters (MCM), which is equivalent to a 0.6 m drop in groundwater levels per year. Finally, the resultant annual safe yield of the aquifer is estimated as 0.84 MCM.     

Experimental testing, numerical modelling and seismic strengthening of traditional stone masonry: comprehensive study of a real Azorian pier

Stone masonry is one of the oldest building techniques used worldwide and it is known to exhibit poor behaviour under seismic excitations. In this context, this work aims at assessing the in-plane behaviour of an existing double-leaf stone masonry pier by experimental testing. Additionally, a detailed 3D finite element numerical analysis based on micro-modelling of the original pier is presented (fully describing the geometry and division of each individual elements, namely infill, blocks and joints) aiming at simulating the experimental test results. This numerical strategy can be seen as an alternative way of analysing this type of constructions, particularly useful for laboratory studies, and suitable for the calibration of simplified numerical models. As part of a wider research activity, this work is further complemented with the presentation of an effective retrofit/strengthening technique (reinforced connected plaster) to achieve a significant improvement of its in-plane cyclic response which is experimentally verified in the results presented herein.     

Assessing the effects of land cover and future climate conditions on the provision of hydrological services in a medium‐sized watershed of Portugal

The separated and combined effects of land‐cover scenarios and future climate on the provision of hydrological services were evaluated in Vez watershed, northern Portugal. Soil and Water Assessment Tool was calibrated against daily discharge, sediments and nitrates, with good agreements between model predictions and field observations. Four hypothetical land‐cover scenarios were applied under current climate conditions (eucalyptus/pine, oak, agriculture/vine and low vegetation). A statistical downscaling of four General Circulation Models, bias‐corrected with ground observations, was carried out for 2021–2040 and 2041–2060, using representative concentration pathway 4.5 scenario. Also, the combined effects of future climate conditions were evaluated under eucalyptus/pine and agriculture/vine scenario. Results for land cover revealed that eucalyptus/pine scenario reduced by 7% the annual water quantity and up to 17% in the summer period. Although climate change has only a modest effect on the reduction of the total annual discharge (?7%), the effect on the water levels during summer was more pronounced, between ?15% and ?38%. This study shows that climate change can affect the provision of hydrological services by reducing dry season flows and by increasing flood risks during the wet months. Regarding the combined effects, future climate may reduce the low flows, which can be aggravated with eucalyptus/pine scenario. In turn, peak flows and soil erosion can be offset. Future climate may increase soil erosion and nitrate concentration, which can be aggravated with agriculture scenario. Results moreover emphasize the need to consider both climate and land‐cover impacts in adaptation and land management options at the watershed scale. Copyright © 2015 John Wiley & Sons, Ltd.     

Separation of PP- and PS-wave reflected seismic data using two-dimensional finite offset common-reflection-surface traveltime approximation

Recently, the interest in PS-converted waves has increased for several applications, such as sub-basalt layer imaging, impedance estimates and amplitude-versus-offset analysis. In this study, we consider the problem of separation of PP- and PS-waves from pre-stacked multicomponent seismic data in two-dimensional isotropic medium. We aim to demonstrate that the finite-offset common-reflection-surface traveltime approximation is a good alternative for separating PP- and PS-converted waves in common-offset and common shot configurations by considering a two-dimensional isotropic medium. The five parameters of the finite-offset common-reflection-surface are firstly estimated through the inversion methodology called very fast simulated annealing, which estimates all parameters simultaneously. Next, the emergence angle, one of the inverted parameters, is used to build an analytical separation function of PP and PS reflection separation based on the wave polarization equations. Once the PP- and PS-converted waves were separated, the sections are stacked to increase the signal-to-noise ratio using the special curves derived from finite-offset common-reflection-surface approximation. We applied this methodology to a synthetic dataset from simple-layered to complex-structured media. The numerical results showed that the inverted parameters of the finite offset common-reflection-surface and the separation function yield good results for separating PP- and PS-converted waves in noisy common-offset and common shot gathers.     

Lentil Straw: A Novel Adsorbent for Removing of Hazardous Dye – Sorption Behavior Studies

Sorption behavior of Lanaset Red (LR) G on lentil straw (LS) was studied as a function of particle size, adsorbent dose, initial pH value, initial dye concentration, and contact time. Sorption kinetics data was well described by logistic model. Modified logistic equation can be used to explain effects of initial dye concentrations and contact time on the sorption of LR G with high R² value. Freundlich model was found to be excellent in representing the equilibrium data. Thermodynamic parameters like free energy (ΔG⁰), enthalpy (ΔH⁰), and entropy (ΔS⁰) were calculated by the use of Langmuir constant. Thermodynamic data showed that the sorption processes were spontaneous and endothermic in nature. Desorption process suggested that strong binding and weak interactions could be formed between adsorbent surface and dye molecules. Results revealed that LS has a remarkable potential for the sorption of LR G.     

Speciation and Determination of Inorganic Mercury and Methylmercury by Headspace Single Drop Microextraction and Electrothermal Atomic Absorption Spectrometry in Water and Fish

In this study, headspace single drop microextraction (HS‐SDME) method in combination with electrothermal atomic absorption spectrometry (ETAAS) method was developed and validated for the speciation and determination of inorganic mercury (iHg) and methylmercury (MeHg). MeHg and iHg species were reduced to volatile methylmercury hydride (CH₃HgH) and elemental mercury, respectively, in the presence of NaBH₄ and trapped onto a drop of acceptor phase in the tip of a microsyringe. Thiourea and ammonium pyrrolydinedithiocarbamate (APDC) were tested as the acceptor phase. The experimental parameters of the method such as microextraction time, temperature, NaBH₄ concentration, acceptor phase concentration, and pH of the medium were investigated to obtain distinctive conditions for mercury species. Possible interference effects have also been investigated. In order to validation of the method, analytical figures of merits such as accuracy, precision, limit of detection (LOD), limit of quantitation (LOQ), and linear working range have been evaluated. Accuracy of the method has been verified by analyzing certified reference materials (BCR 453 Tuna fish) and spiked samples. The proposed method was applied for the speciation and determination of mercury species in water and fish samples. Mercury species (MeHg and iHg) have been determined in the real samples with a relative error less than 10%.     

Review of water and soil contamination in and around Salihli geothermal field (Manisa,Turkey)

The town of Salihli is situated in Gediz Graben in the western Anatolia. This region is important in terms of industry, mining, geothermal energy, water sources, and agricultural production. Geothermal flow and anthropogenic activities in Salihli threaten the surrounding environment due to the contamination of cold groundwater, surface water, and soil. The goal of the present study is to determine the environmental effects of the geothermal and anthropogenic activities in Salihli on soil, stream sediments, and water. Stream sediments and farm soil have been contaminated by substances derived from geothermal and industrial effluents. To this end, the quality review of the water was completed and the heavy metal levels in stream sediment samples were measured to determine the extent of contamination. The elements As, B, Br, Fe, and Ni are the major contaminants present in surface water and groundwater in the study area. The concentrations of these elements excess tolerance limits of international water standards. Gibbsite, K-mica, kaolinite, sepiolite, halite, sulfur, willemite, and Pb(OH)₂ might be precipitated as scales at low temperatures on the soil; this could be interpreted as a resultant from soil contamination. The concentrations of 17 elements (As, Ba, B, Cd, Co, Cr, Cu, Fe, Hg, Li, Mo, Mn, Ni, Pb, Sb, Sr, and Zn) were measured in samples from stream sediments and surface soils. In the study area, especially geothermal and anthropogenic activities give rise to environmental pollution.     

The Alcamayo and Cedrobamba catastrophic debris flow (January, March and April 2004) in Machupicchu area—Peru

A debris flow originating from the Alcamayo River on 10th April 2004 destroyed a part of the town of Aguas Calientes, resulting in 11 victims, and with serious affects to the tourist flow to the Machupicchu inka citadel. On the same day, as well as in January and March 2004, other similar phenomena occurred on the Cedrobamba and Leonchayoq Rivers, affecting the railway and an electrical tower, and disrupting the train service.     

The Response of Estuarine Macrobenthic Communities to Natural- and Human-Induced Changes: Dynamics and Ecological Quality

Anthropogenic activities are a disturbance factor of coastal systems and can be widely recognized as a major threat to the health of coastal systems. However, natural events cannot be disregarded from management issues because of their significant influence on the communities living in these areas. Based on long-term subtidal data from the Mondego Estuary (Portugal), the effects of natural events (e.g., floods and droughts) on macrobenthic communities were compared with the anthropogenic events. Sampling stations were grouped into characteristic zones (mouth, north arm, south arm) so the community dynamics of each of these estuarine areas could be followed over time. Environmental assessment was performed for stations using the Benthic Assessment Tool (BAT), and compared with the existing pressures. Human impacts persist over a number of years and gradually reduce ecosystem health, as discussed in the European Water Framework Directive. Paradoxically, natural events cause stronger impacts but are of a shorter duration, which allows for a faster recovery of macrobenthic communities. The study showed that caution should be taken when developing and implementing water policies so as not to disregard the importance of the different events (natural and human-caused) on the ecosystem health (e.g., community degradation and water quality and ecological quality status assessment).