Dynamic stress concentration and scattering of SH-wave by interface elliptic cylindrical cavity

In this paper, the dynamic stress concentration and scattering of SH-waves by bi-naterial structures that possess an interface elliptic cavity are investigated. First, by using the complex function method, the Green‘s function is constructed. This yields the solution of the displacement field for an elastic half space with a semi-elliptic canyon impacted by an anti-plane harmonic line source loading on the horizontal surface. Then, the problem is divided into an upper and lower half space along the horizontal interface, regarded as a harmony model. In order to satisfythe integral continuity condition,the unknown anti-plane forces are applied to the interface. The integral equations with unknown forces can be established through the continuity condition, and after transformation, the algebraic equations are solved numerically. Finally, the distribution of the dynamic stress concentration factor (DSCF) around the elliptic cavity is given and the effect of different parameters on DSCF is discussed.     

Remote structural health monitoring with serially multiplexed fiber optic acoustic emission sensors

Development and testing of a serially multiplexed fiber optic sensor system is described. The sensor differs from conventional fiber optic acoustic systems, as it is capable of sensing AE emissions at several points along the length of a single fiber. Multiplexing provides for single channel detection of cracks and their locations in large structural systems. An algorithm was developed for signal recognition and tagging of the AE waveforms for detection of crack locations. Laboratory experiments on plain concrete beams and post-tensioned FRP tendons were performed to evaluate the crack detection capability of the sensor system. The acoustic emission sensor was able to detect initiation, growth and location of the cracks in concrete as well as in the FRP tendons. The AE system is potentially suitable for applications involving health monitoring of structures following an earthquake Supported by: National Science Foundation, Grant number CMS-9900338     

A technique to improve the empirical mode decomposition in the Hilbert-Huang transform

The Hilbert-based time-frequency analysis has promising capacity to reveal the time-variant behaviors of a system. To admit well-behaved Hilbert transforms, component decomposition of signals must be performed beforehand. This was first systematically implemented by the empirical mode decomposition (EMD) in the Hilbert-Huang transform, which can provide a time-frequency representation of the signals. The EMD, however, has limitations in distinguishing different components in narrowband signals commonly found in free-decay vibration signals. In this study, a technique for decomposing components in narrowband signals based on waves’ beating phenomena is proposed to improve the EMD, in which the time scale structure of the signal is unveiled by the Hilbert transform as a result of wave beating, the order of component extraction is reversed from that in the EMD and the end effect is confined. The proposed technique is verified by performing the component decomposition of a simulated signal and a free decay signal actually measured in an instrumented bridge structure. In addition, the adaptability of the technique to time-variant dynamic systems is demonstrated with a simulated time-variant MDOF system.     

Relationships between moment magnitude and fault parameters: theoretical and semi-empirical relationships

Fault parameters are important in earthquake hazard analysis. In this paper, theoretical relationships between moment magnitude and fault parameters including subsurface rupture length, downdip rupture width, rupture area, and average slip over the fault surface are deduced based on seismological theory. These theoretical relationships are further simplified by applying similarity conditions and an unique form is established. Then, combining thc simplified theoretical relationships between moment magnitude and fault parameters with seismic source data selected in this study, a practical semi-empirical relationship is established. The seismic source data selected is also to used to derive empirical relationships between moment magnitude and fault parameters by the ordinary least square regression method. Comparisons between semi-empirical relationships and empirical relationships show that the former depict distribution trends of data better than the latter. It is also observed that downdip rupture widths of strike slip faults are saturated when moment magnitude is more than 7.0, but downdip rupture widths of dip slip faults are not saturated in the moment magnitude ranges of this study.     

Lateral load pattern in pushover analysis

The seismic capacity curves of three types of buildings including frame, frame-shear wall and shear wall obtained by pushover analysis under different lateral load patterns are compared with those from nonlinear time history analysis. Based on the numerical results obtained a two-phase load pattern; an inverted triangle (first mode) load pattern until the base shear force reachesβ times its maximum value, V_max, followed by a (x/H)^α form, hereβ and α being some coefficients depending on the type of the structures considered, is proposed in the paper, which can provide excellent approximation of the seismic capacity curve for low-to-mid-rise shear type buildings. Furthermore, it is shown both the two-phase load pattern proposed and the invariant uniform pattern can be used for low-to-mid-rise shear-bending type and low-rise bending type of buildings. No suitable load patterns have been found for high-rise buildings.     

Structural physical parameter identification based on evolutionary-simplex algorithm and structural dynamic response

Evolutionary computation based on the idea of biologic evolution is one type of global optimization algorithm that uses self-adaptation, self-organization and random searching to solve optimization problems. The evolutionary-simplex algorithm is introduced in this paper. It contains floating encoding which combines the evolutionary computation and the simplex algorithm to ovcrcomc the problems encountered in the genetic algorithm and evolutionary strategy methods.Numerical cxpcrimcnts arc performed using seven typical functions to verify the algorithm. An inverse analysis method to identify structural physical parameters based on incomplete dynamic responses obtained from the analysis in the time domain is prcscntcd by using the evolutionary-simplex algorithm. The modal evolutionary-simplex algorithm converted from the time domain to the modal domain is proposed to improve the inverse efficiency. Numerical calculations for a 50-DOF system show that whcn compared with other methods, the evolutionary-simplex algorithm offers advantages of high precision,cfficient searching ability, strong ability to resist noise, independence of initial value, and good adaptation to incomplete information conditions.     

An evaluation of the role played by remote sensing technology following the World Trade Center attack

Remote sensing technology has been widely recognized for contributing to emergency response efforts after the World Trade Center attack on September 11th, 2001. The need to coordinate activities in the midst of a dense, yet relatively small area, made the combination of imagery and mapped data strategically useful. This paper reviews the role played by aerial photography, satellite imagery, and LIDAR data at Ground Zero. It examines how emergency managers utilized these datasets, and identifies significant problems that were encountered. It goes on to explore additional ways in which imagery could have been used, while presenting recommendations for more effective use in future disasters and Homeland Security applications. To plan adequately for future events, it was important to capture knowledge from individuals who responded to the World Trade Center attack. In recognition, interviews with key emergency management and geographic information system (GIS) personnel provide the basis of this paper. Successful techniques should not be forgotten, or serious problems dismissed. Although widely used after September 11th, it is important to recognize that with better planning, remote sensing and GIS could have played an even greater role. Together with a data acquisition timeline, an expanded discussion of these issues is available in the MCEER/NSF report “Emergency Response in the Wake of the World Trade Center Attack; The Remote Sensing Perspective” (Huyck and Adams, 2002)     

Studies on seismic waves

The development of seismic wave study in China in the past four years is reviewed. The discussion is divided into several aspects, including seismic wave propagation in laterally homogeneous media, laterally heterogeneous media, anisotropic and porous media, surface wave and seismic wave inversion, and seismic wave study in prospecting and logging problems. Important projects in the current studies on seismic wave is suggested as the development of high efficient numerical methods, and applying them to the studies of excitation and propagation of seismic waves in complex media and strong ground motion, which will form a foundation for refined earthquake hazard analysis and prediction.     

Hornblende-dehydration melting in mafic rocks and the link between massif-type charnockite and associated granulites,Eastern Ghats Granulite Belt,India

A massif-type (intrusive) charnockite body in the Eastern Ghats granulite belt, India, is associated with hornblende-bearing mafic granulite, two-pyroxene granulite and enderbitic granulite. The charnockite is characterised by pervasive gneissic foliation (S₁). This is axial planar to the folded layers of hornblende-bearing mafic granulite (F₁ folds), indicating that the granulite protoliths were present before the development of S₁. Two-pyroxene granulite and enderbitic granulite occur as lenticular patches disposed along the foliation and hence could be syngenetic to S₁. The tonalitic to granodioritic, metaluminous to weakly peraluminous compositions and relatively high Sr/Rb of the charnockite are consistent with its derivation by partial melting of a mafic protolith. Strong Y depletion, lack of Sr depletion and strongly fractionated REE patterns with high (La/Yb)_N ratio, but relatively lower HREE (Gd/Lu) fractionation with marked positive Eu anomalies, suggest major residual hornblende (as well as garnet), but not plagioclase, consistent with the hornblende dehydration melting in the source rocks. Such a residual mineralogy is broadly similar to those of some of the hornblende-bearing mafic granulite inclusions, which have compositional features indicative of a restitic nature. Quantitative modelling supports an origin for the charnockite melts by partial melting of a hornblende-rich mafic granulite source, although source heterogeneity is very likely given the rather variable trace element contents of the charnockite. The whole-rock and mineral compositions of the two-pyroxene granulites and enderbitic granulites are consistent with them representing peritectic phase segregations of hornblende-dehydration melting. A clockwise P-T path implies that melting could have occurred in thickened continental crust undergoing decompression.Editorial responsibility: T.L. Grove     

The effect of chlorite interlayering on <Superscript>40</Superscript>Ar–<Superscript>39</Superscript>Ar biotite dating: an <Superscript>40</Superscript>Ar–<Superscript>39</Superscript>Ar laser-probe and TEM investigations of variably chloritised biotites

Biotite is one of the most common minerals dated by the ⁴⁰Ar–³⁹Ar method. It frequently shows K contents below the expected stoichiometric value, suggesting the presence of low-K impurities. The most common low-K alteration product of biotite is chlorite. Therefore, it is important to understand the effects of chlorite interlayering on ⁴⁰Ar–³⁹Ar ages in order to correctly interpret ⁴⁰Ar–³⁹Ar data. This study examines the outcome of ⁴⁰Ar–³⁹Ar dating analyses on variably chloritised biotites from Ordovician intrusive rocks. The infrared (IR) laser-probe technique and different gas extraction methods were adopted. Incremental laser-heating data on bulk samples yielded hump-shaped age profiles with meaningless young and old age steps. Both the extent of anomalous old age steps and the degree of discordance of the age spectra were much more pronounced in the more chloritised biotite samples. In contrast, in situ data on rock chips and total-fusion ages on single biotite flakes yielded ages concordant with, or younger than, the inferred emplacement ages. Transmission electron microscopy (TEM) was used to texturally characterise biotite samples at the nanometre scale. It was also used to document the complex decomposition-transformation process affecting interlayered biotite–chlorite during in-vacuo IR-laser heating to temperatures ranging from ~600 to >1,000 °C. TEM results suggest that hump-shaped age profiles result from an interplay between ³⁹Ar_K redistribution by recoil during sample irradiation and differential release of argon isotopes hosted in three main reservoirs. These reservoirs are (from least to most retentive): extended defects, chlorite and biotite. The final descending age segment is attributed to the progressive release of argon with increasing temperature from large biotite domains for which ³⁹Ar_K recoil loss was less important. ⁴⁰Ar–³⁹Ar data support previous findings, which suggest that ⁴⁰Ar–³⁹Ar ages when recoil effects are minimised, provide minimum estimates that approach the true biotite age, when the pristine domains are analysed. The most effective approach for obtaining meaningful ⁴⁰Ar–³⁹Ar ages was using individual total-fusion analyses on carefully selected, single flakes previously split along the basal cleavage by wet-grinding and corresponding to a sample mass of a few micrograms.Editorial responsibility: I Parsons