Potentialité d'utilisation d'argiles marocaines de Jbel Kharrou dans l'industrie céramique

The Ordovician clays of Jbel Kharrou (Rehamna, Morocco) have been studied for their use in ceramic industry. The realised studies were carried out on two samples B1 and B2, the most representative, taken from a clay dominated formation that outcrops 25 km east of the Skhour Rehamna city. The chemical analyses, mineralogical studies and advanced technological tests undertaken on the two samples indicate that these clays can be considered as non-refractory material, so they can be used to the manufacturing of ceramic products: soil and wall tiles, sanitary, pottery, etc. The tested briquettes, cooked at 1040?°C, remain flat, without deformation or defects; they are of cream white dye. These briquettes show a high mechanical resistance to the flexion, the loss in weight remains tolerable with cooking, lightly elevated (12% ); it can be corrected by the addition of a grease-remover. To cite this article: N. El Yakoubi et al., C. R. Geoscience 338 (2006).     

Salinity effect on the liquid limit of soils

Acta Geotechnica - Previous studies stated that, with increasing salinity, the decreased liquid limit for expansive soils was attributed to the shrinkage of diffuse double layer, while the...     

A GIS-based approach for gully erosion susceptibility modelling using bivariate statistics methods in the Ourika watershed,Morocco

Gully erosion is an important environmental issue with severe impacts. This study aimed to characterize gully erosion susceptibility and assess the capability of information value (InfVal) and frequency ratio (FR) models for its spatial prediction in Ourika watershed of the High Atlas region of Morocco. These two bivariate statistical methods have been used for gully erosion susceptibility mapping by comparing each data layer of causative factor to the existing gully distribution. Weights to the gully causative factors are assigned based on gully density. Gullies have been mapped through field surveys and Google earth high-resolution images. Lithofacies, land use, slope gradient, length-slope, aspect, stream power index, topographical wetness index and plan curvature were considered predisposing factors to gullying. The digitized gullies were randomly split into two parts. Sixty-five percent (65%) of the mapped gullies were randomly selected as training set to build gully susceptibility models, while the remaining 35% cases were used as validation set for the models’ validation. The results showed that barren and sparse vegetation lands and slope gradient above 50% were very susceptible to gully erosion. The ROC curve was used for testing the accuracy of the mentioned models. The analysis confirms that the FR model (AUC 80.61%) shows a better accuracy than InfVal model (AUC 52.07%). The performance of the gully erosion susceptibility map constructed by FR model is greater than that of the map produced by InfVal model. The findings proved that GIS-based bivariate statistical methods such as frequency ratio model could be successfully applied in gully susceptibility mapping in Morocco mountainous regions and in other similar environments. The produced susceptibility map represents a useful tool for sustainable planning, conservation and protection of land from gully processes.     

Simulating sub-daily hydrological process with SWAT: a review

ABSTRACT

The Soil and Water Assessment Tool (SWAT) is a watershed-scale hydrologic model that integrates water quantity and quality modules. Despite the large amount of knowledge on the SWAT model, specific understanding of sub-daily applications remains limited. In this review, we identify the shortcomings and possible ways forward in simulating sub-daily processes with the model. A literature review was conducted, along with a participatory method based on a questionnaire. We reviewed 28 scientific articles and categorized them into: (i) model development, (ii) streamflow methods comparison, (iii) water quality, and (iv) other applications. We found that using sub-daily data improves hydrograph peak simulation, while for medium flows use of daily data was better. From all the reviewed studies, a 1-hour time step was the most suitable time scale for the sub-daily model application. The participatory questionnaire confirmed the hypothesis that the main challenge for using the sub-daily routine was the lack of high-resolution data.     

Flow units delineation of multiple hydrocarbon reservoirs using hydraulic zonation technique via cluster analysis algorithm,Zeit Bay Field,Gulf of Suez,Egypt

Investigation of hydraulic units in drilled wells through multiple reservoirs in Zeit Bay Field is the main target of this paper. Karim Limestone and Nubian Sandstone are target reservoirs in this study. Hydraulic zones provide a fundamental unit for subsequent reservoir characterization and simulation and also prove to be helpful in defining future well completion and work over practices. Hydraulic zonation by means of cluster analysis has been utilized to achieve this target. Hierarchical cluster analysis, elbow method, and k-means clustering are the main steps of this analysis. Petrophysical properties obtained from cores are utilized to perform this zonation. These properties are permeability and porosity data. Results have been validated by comparing the geological behavior of each zone against the measured permeability curve. Finally through this zonation, flow units which have the potential to extract fluids are determined more accurately. Petroleum geologists and engineers are more interested in these results. The cluster analysis flow suggesting in this paper is cost-effective due to lack of need for any commercial software.     

Spatial distribution and temporal trends of persistent organochlorine pollutants in sediments from Lake Maryut, Alexandria, Egypt

Organochlorine compounds (OCs) in surface and core sediments collected from Lake Maryut, Egypt, were examined to elucidate their distribution, ecological risk and historical trend. To our knowledge, this is the first study on residue levels of OCs in sediments from Lake Maryut. Concentrations of PCBs and DDTs were higher than other OCs, ranging from 3.06 to 388 and from 0.07 to 106 ng/g dry wt., respectively. The highest concentrations of OCs were found at stations near the discharge point of sewage and close to industrial areas. The distribution of DDT and its metabolites suggest no recent inputs into the lake environment. Contamination levels of sedimentary PCBs and DDTs, can be categorized moderate to high compared to other urbanized regions worldwide. Temporal trends in OCs levels were influenced by input pathways at two sites. Evaluation of ecotoxicological risks suggests that adverse biological effects are expected mainly in the main basin area.     

OH-bearing planar defects in olivine produced by the breakdown of Ti-rich humite minerals from Dabie Shan (China)

The partial breakdown of Ti-chondrodite and Ti-clinohumite during exhumation from ultra-high pressure to amphibolite facies conditions in garnet-pyroxenites from Dabie Shan (China) produces coronas of olivine coexisting with ilmenite blebs. Fourier transform infrared (FTIR) spectra of this newly formed olivine exhibit absorption bands in the hydroxyl-stretching region. Two intense peaks were observed at 3,564 and 3,394 cm⁻¹, identical in energy to peaks in Ti-clinohumite. Transmission electron microscopy (TEM) of the same olivine domains revealed the presence of a complex (001) planar intergrowth. These interlayers have a 1.35 nm repeat distance, which is characteristic of clinohumite. Such interlayers are also enriched in Ti with respect to the adjacent olivine as shown by energy dispersive spectrometry. The combined evidence from FTIR spectroscopy and TEM indicates that OH is incorporated along Ti-clinohumite planar defects. This study provides evidence that the nominally anhydrous phase olivine may contain OH as a humite-type defect beyond the breakdown of the hydrous humite minerals and confirms earlier suggestions that Ti plays a key role in OH incorporation in mantle olivine. We suggest that olivine containing Ti-clinohumite defects is an important phase for water transport in subduction zones and for the storage of water in cold subcontinental mantle. However, these defects are unlikely to be stable in hotter parts of the oceanic mantle such as where basaltic magmas are generated.