Morphodynamics of a bar-trough surf zone

A field study was made of the distinguishing morphodynamic processes operating in a surf zone which perennially exhibits accentuated bar-trough topography (the “longshore-bar-trough” and “rhytmic-bar-and-beach” states as described by Wright and Short, 1984). Characteristic features of the morphology include a shallow bar with a steep shoreward face, a deep trough, and a steep beach face. This morphology, which is favored by moderate breaker heights and small tidal ranges, strongly controls the coupled suite of hydrodynamic processes. In contrast to fully dissipative surf zones, the bar-trough surf zone is not at all saturated and oscillations at incident wave frequency remain dominant from the break point to the subaerial beach. The degree of incident wave groupiness does not change appreciably across the surf zone. Infragravity standing waves which, in dissipative surf zones, dominate the inshore energy, remain energetically secondary and occur at higher frequencies in the bar trough surf zone. Analyses of the field data combined with numerical simulations of leaky mode and edge wave nodal—antinodal positions over observed surf-zone profiles, indicate that the frequencies which prevail are favored by the resonant condition of antinodes over the bar and nodes in the trough. Standing waves which would have nodes over the bar are suppressed. Sediment resuspension in the surf zone appears to be largely attributable to the incident waves which are the main source of bed shear stress. In addition, the extra near-bottom eddy viscosity provided by the reformed, non-breaking waves traversing the trough significantly affects the vertical velocity profile of the longshore current. Whereas the bar is highly mobile in terms of onshore—offshore migration rates, the beach face and inner regions of the trough are remarkably stable over time.     

Methane in the water and bottom sediments of the mouth area of the Severnaya Dvina River during the winter time

The spatial distribution of methane in the water and bottom sediments of the mouth area of the Severnaya Dvina River shows quite a similar character during the ice-cover and summer periods. It is characterized by the increase of the gas content from the head of the mouth area towards the delta with maximum values at the sites subjected to permanent anthropogenous impact. The difference consists in the higher level of the methane content in the bottom sediments during the winter period. At the same time, the excess of the winter to summer concentrations in the water was registered only at the stations within the impact area of the sources of anthropogenous contamination. As in the summer, the bottom sediments have a prevailing role in the formation of the level of the methane content in the water of the mouth area. The linear dependence between the concentrations of the total hydrogen sulfide and methane in the surface layer of the riverine sediments is probably caused by the parallel and nonconcurrent proceeding of the generation of these gases, which are controlled by the bacterial communities being not inhibitory to each other.     

Changes in the onset and length of seasons from an ensemble of regional climate models over Spain for future climate conditions

This study analyses the length and onset of the four seasons based on the annual climatic cycle of maximum and minimum temperatures. Previous studies focused over climatically homogeneous mid-high latitude areas, employing fixed temperature thresholds (related to climatic features such as freezing point) that can be inadequate when different climate conditions are present. We propose a method related to the daily minimum and maximum temperature 25th and 75th point-dependent climatic percentiles. It is applied to an ensemble of regional climate models (RCMs) of 25-km horizontal resolution over the peninsular Spain and Balearic Islands, where a large variety of climatic regimes, from alpine to semi-desertic conditions, are present. First, baseline climate (1961–2000) ERA40-forced RCM simulations are successfully compared with the Spain02 daily observational database, following astronomical season length (around 90 days). This result confirms the validity of the proposed method and capability of the RCMs to describe the seasonal features. Future climate global climate model-forced RCMs (2071–2100) compared with present climate (1961–1990) simulations indicate the disappearance of winter season, a summer enlargement (onset and end) and a slight spring and autumn increase.     

Variations in wave direction estimated using first and second order Fourier coefficients

In most design applications such as alignment of the berthing structure and breakwater alignment, it becomes necessary to determine the direction of design wave. There are two different approaches to determine wave direction. One involves the use of first order Fourier coefficients (mean wave direction) while the other uses second order Fourier coefficients (principal wave direction). Both the average wave direction over the entire frequency range (0.03–0.58 Hz) and the direction corresponding to the peak frequency are used in practice. In the present study, comparison is made on wave directions estimated based on first and second order Fourier coefficients using data collected at four locations in the west and east coasts of India. Study shows that at all locations, the mean and principal wave directions for frequencies ranging from 0.07 to 0.25 Hz (±0.5 times peak frequency) co-vary with a correlation coefficient of 0.99 but at lower and higher frequencies, difference between the parameters is large. Average difference between the mean wave direction at peak frequency and the average over the frequency related to spectral energy more than 20% of maximum value is less, around 13°. Study shows that average difference in the sea and swell directions is around 39°.     

Sedimentogenesis in the White Sea: Vertical Fluxes of Suspended Particulate Matter and Absolute Masses of Bottom Sediments

Oceanology - A new approach has been applied to studying marine sedimentation using dispersed sedimentary material in sediment traps compared to the surface layer of bottom sediments. Based on...     

The evolution of zircon during low‐P partial melting of metapelitic rocks: theoretical predictions and a case study from Mt Stafford,central Australia

Palaeoproterozoic metasedimentary migmatite reflects the highest temperature parts of a regional aureole at Mt Stafford, central Australia, comprising rocks that experienced 500–800 °C at ≈3 kbar. Whole‐rock major element concentrations are correlated with Zr content, psammitic compositions having nearly twice the Zr content of pelitic compositions. Zirconium is concentrated in mesosome compared with leucosome. Zircon is largely detrital, mostly lacking any overgrowth contemporary with migmatite formation. Comparatively small proportions of micro‐zircon (<10 μm) in sub‐solidus rocks are mostly hosted by quartz and plagioclase. Much higher proportions (three to five times) of micro‐zircon in migmatite are hosted by prograde K‐feldspar, cordierite and biotite. T–X and P–T NCKFMASHTZr pseudosections constructed using thermocalc model the distribution of Zr between solid and silicate liquid phases. Half of the detrital zircon (~100 ppm Zr) is predicted to be dissolved into silicate liquid at ≈800 °C and all dissolved by 850 °C, if all zircon is involved in the equilibration volume. Melt segregation at relatively low temperature is predicted to enrich the residuum in Zr, consistent with the observed distribution of Zr between mesosome and leucosome. The limited development of metamorphic zircon rims or overgrowths at Mt Stafford is explained by three concurrent processes: (i) Zr liberated during prograde metamorphism formed micro‐zircon, rather than following the prediction that Zr will partition into silicate liquid; (ii) some detrital zircon was probably armoured by other rock‐forming minerals, reducing Zr content in the effective bulk rock composition; and (iii) small proportions of melt loss during migmatization removed Zr that otherwise would have been available to form metamorphic rims.     

On the asymmetry of moustaches

A careful photometry of moustaches is carried out to reveal asymmetry of their emission in the far wings ( 1 Å), if it exists. The presence of background continuous emission in spectra of moustaches demands special care with the photometry, and makes the current method of comparison of rest-intensities inadequate. The other sources of errors are also discussed. The blue asymmetry, as a systematic difference of intensities between the blue and the red wing shows itself in some cases, being 2–3 times larger than the probable errors. In most moustaches investigated, the accompanying background continuous emission shows a rapid increase to the violet.     

新疆及周缘构造破裂特征及地震序列类型

横亘新疆境内的天山及其周边的西昆仑、阿尔金和阿尔泰是中国大陆著名的强构造运动区和地震活动带。在对新疆构造区应力环境、动力过程、断层运动变形特征和地震序列分析讨论的基础上,对新疆及其周缘主要构造区地震破裂方式和序列类型进行研究,得出如下结论:(1)西昆仑构造区受来自青藏块体和塔里木块体NS和NW向水平压应力和垂向力的作用,构造运动呈现出走滑与逆冲特征,震源破裂以走滑型为主,数量较少的逆断型地震主要分布在西昆仑帕米尔一侧的深震挤压区,正断型地震主要出现在西昆仑与阿尔金交汇的拉张盆地及附近。该区主余型地震占63%,6级以上地震序列也存在多震类型。(2)阿尔金断裂带位于西昆仑北缘断裂和北祁连断裂过渡带,受青藏块体向北和向西的推挤,断裂本身的左旋位移量通过两端逆冲挤压而转化,使得青藏高原北边界不断向外扩展。在此力源下,阿尔金断裂带震源破裂以走滑为主,也有少量的逆冲型地震。地震序列中主余型和孤立型地震占比相同(占44%)。(3)在印度板块和亚欧大陆碰撞效应影响下,天山地区产生近NNE向水平压应力,构造运动显现出带旋性特征的逆冲和走滑,震源破裂方式与之相吻合。而天山构造大跨度的空间展布、扩展形式的多样性和地震破裂的两重性,又影响到地震序列类型的多样性,使得主余型、孤立型和多震型地震在不同构造部位呈现优势分布。(4)阿尔泰的构造运动可能受到了来自印度板块与亚欧板块碰撞的远程效应和西伯利亚块体南向运动的双向影响,形成NNE和SW向水平挤压力,主要大型发震断裂做右旋剪扭错动,而一些深断裂则以逆冲运动为主。震源破裂呈现出走滑(占64%)和部分的逆冲(占27%),6级以上地震序列主要为主余型,5级左右地震则多为孤立型。     

Element mobility during continental collision: insights from polymineralic metamorphic vein within UHP eclogite in the Dabie orogen

Metamorphic dehydration and partial melting are two important processes during continental collision. They have significant bearing on element transport at the slab interface under subduction‐zone P–T conditions. Petrological and geochemical insights into the two processes are provided by a comprehensive study of leucocratic veins in ultrahigh‐pressure (UHP) metamorphic rocks. This is exemplified by this study of a polymineralic vein within phengite‐bearing UHP eclogite in the Dabie orogen. The vein is primarily composed of quartz, kyanite, epidote and phengite, with minor accessory minerals such as garnet, rutile and zircon. Primary multiphase solid inclusions occur in garnet and epidote from the both vein and host eclogite. They are composed of quartz ± K‐feldspar ± plagioclase ± K‐bearing glass and exhibit irregular to negative crystal shapes that are surrounded by weak radial cracks. This suggests their precipitation from solute‐rich metamorphic fluid/melt that involved the reaction of phengite breakdown. Zircon U–Pb dating for the vein gave two groups of concordant ages at 217 ± 2 and 210 ± 2 Ma, indicating two episodes of zircon growth in the Late Triassic. The same minerals from the two rocks give consistent δ¹⁸O and δD values, suggesting that the vein‐forming fluid was directly derived from the host UHP eclogite. The vein is much richer in phengite and epidote than the host eclogite, suggesting that the fluid is associated with remarkable concentration of such water‐soluble elements as LILE and LREE migration. Garnet and rutile in the vein exhibit much higher contents of HREE (2.2–5.7 times) and Nb–Ta (1.8–2.0 times) than those in the eclogite, indicating that these normally water‐insoluble elements became mobile and then were sunken in the vein minerals. Thus, the vein‐forming agent would be primarily composed of the UHP aqueous fluid with minor amounts of the hydrous melt, which may even become a supercritical fluid to have a capacity to transport not only LILE and LREE but also HREE and HFSE at subduction‐zone metamorphic conditions. Taken together, significant amounts of trace elements were transported by the vein‐forming fluid due to the phengite breakdown inside the UHP eclogite during exhumation of the deeply subducted continental crust.