Nature and age of metamorphic rocks from the basement of the West Siberian megabasin (according to U-Pb isotopic dates)

The SHRIMP-II zircon U-Pb dates for metamorphic rocks from the West Siberian basement are determined for the first time. It is established that the major protolith of the metamorphic strata from the Shaimsk-Kuznetsovsk meganticlinorium is composed of sedimentary Late- and Middle-Devonian rocks (395–398 Ma). It is likely that the greywackes, whose strata were mainly formed under erosion of ophiolitic rocks, served as a substrate for the metamorphic rocks. The metamorphic transformations of the rocks occurred under conditions of greenschist and occasionally lower amphibolite facies of metamorphism during the Late Carboniferous-Early Permian period.     

Revisiting the abandoned shorelines of Lake George,Australia: a refined optical dating framework

Abandoned shorelines are an important archive used to constrain past fluctuations in the hydrological balance of lakes around the globe. Within Australia, the shorelines preserved at Lake George, NSW, form one of the few shoreline archives in the south-east of the continent that record palaeoenvironmental conditions throughout the late Quaternary. Here, we examined and tested the lake-level record for Lake George constructed in the 1970s by dating a well-preserved shoreline sequence at Luckdale, on the lake's eastern shore, using single-grain optically stimulated luminescence (OSL) dating. Ten stratigraphic units were identified, and these suggest a late Quaternary highstand for Lake George in MIS 3, with fluctuations superimposed upon an overall drying trend throughout MIS 2 and into the present. At Luckdale, the highest four shoreline-associated units were deposited ~13 to 19 m above lake base and date to between 39 ± 2 and 29 ± 1 ka ago. Our study pushes back the timing of maximum lake depth at Lake George to at least MIS 3, rather than MIS 2. The overall drying trend is supported by similar reductions in both Riverine Plain fluvial activity and other associated lake-level records from within the Murray basin.     

Development of New Zealand according to the fore-arc model of crustal evolution

Analysis of New Zealand geology using a fore-arc model (Crook, 1980a) leads to the recognition of four arc terrains. The west facing Tuhua volcanic arc was active from the Late Proterozoic until the Middle or Late Cambrian. Post-subduction sediments, neritic in the east and flysch in the west, accumulated on the Tuhua accretionary prism from the Late Cambrian until the Early Devonian. Thermal equilibration, metamorphism, granitoid plutonism and penetrative deformation occurred in the Middle to Late Devonian. A small area of Permian platform cover has escaped later erosion. The east-facing Rangitata Terrain records subduction from Early Permian to late Early Cretaceous. Much of its accretionary prism consists of a submarine fan complex derived from Western Antarctica and carried sideways into the trench. The accretionary prism is thick and completely kratonized in southern New Zealand, but the thickness is more variable northwards. There the overlying Upper Cretaceous to Upper Oligocene post-subduction sequence comprises shelf sediments (implying an intermediate-thickness prism) or flysch followed by shelf sediments (implying a thin prism). During the accumulation of this sequence the Rangitata Terrain was a passive continental margin. The south-facing Jurassic-late Oligocene Northland Terrain collided with this passive margin in northern New Zealand at the end of the Oligocene, forming the Northland Allochthon. Subduction then flipped and the oldest part of the Kaikoura Terrain volcanic arc formed on the outer part of the Northland Terrain. Originally this terrain faced northeast and consumed the southwestern part of the South Fiji Basin crust, but during the Miocene the arc migrated clockwise to assume its present northeastern orientation. The fore-arc model employed here satisfactorily explains most first-order and many second-order features of New Zealand geology without requiring modification, thus attesting to the model's versatility and robustness. New Zealand provides a basis for elaborating some aspects of the model, particularly the transition from the syn- to post-subduction phases of fore-arc evolution. Combination of this study with a similar study of the southeastern Australian Paleozoic yields insights into the Phanerozoic evolution of the Australian: Pacific Plates' active margin.     

Dissolution of well and poorly ordered kaolinites by an aerobic bacterium

Previous research by our group (e.g., [Chem. Geol. 132 (1996) 25; Geochim. Cosmochim. Acta 64 (2000) 1363]) has shown that an aerobic Pseudomonas mendocina bacterium enhances Fe(hydr)oxide dissolution in order to obtain Fe under Fe-limited conditions. The P. mendocina is incapable of utilizing Fe as a terminal electron acceptor and requires several orders of magnitude lower Fe concentrations than do dissimilatory Fe reducing bacteria. The research reported here compared the effects of the P. mendocina on dissolution of well and poorly ordered Clay Minerals Society Source Clay kaolinites KGa-1b and KGa-2, respectively, under Fe-limited conditions. KGa-1b and KGa-2 contain 0.04 and 0.94 bulk wt.% Fe, respectively, and their surface Fe/Si atomic RATIOS=0.008 and 0.012. Following strong cleaning of the kaolinites in 5.8 M HCl at 85 °C, the surface Fe/Si atomic ratios decreased to 0.004 and 0.008, respectively. Both kaolinites also developed a Si-enriched surface precipitate upon strong cleaning.

Because the P. mendocina take up Fe, we could not measure Fe release from the kaolinite directly, but rather had to monitor it indirectly by comparing microbial populations sizes under Fe-limited growth conditions. We found that microbial growth on uncleaned, weakly cleaned, and strongly cleaned kaolinites increased with the amount of Fe readily available to organic ligands as estimated by dissolution in 0.001 M oxalate (pH 3). This suggests that it is the amount of readily accessible Fe that controls Fe acquisition and hence microbial growth. The trend is based on only a relatively small range of kaolinite Fe contents, and the research thus needs to be expanded to include kaolinites with a broader range of bulk and surface Fe concentrations.

Significant enhancement of Al release was observed in the presence of the bacteria, along with generally some enhancement of Si release. This enhancement of kaolinite dissolution could be related to an observed pH increase from 7–8 to 9 in the presence of the bacteria and/or to production of Al chelating agents. The P. mendocina produce a variety of organic exudates, including siderophores [Chem. Geol. 132 (1996) 25; Geomicrobiology (2001b)], and further studies into the effects of the siderophores on Al complexation and on kaolinite dissolution are ongoing.     

Cloning of a chub metallothionein cDNA and development of competitive RT-PCR of chub metallothionein mRNA as a potential biomarker of heavy metal exposure

Metallothionein has been assayed in a range of aquatic animal tissues as an indicator of metal exposure. We sequenced chub (Leuciscus cephalus) metallothionein cDNA which showed over 90% homology to common carp, goldfish and stone loach and 77% homology to rainbow trout sequences for metallothionein. We then used the extended primer method to develop an accurate quantitative competitive RT-PCR assay for metallothionein mRNA. RT-PCR was used to measure metallothionein mRNA in feral chub from a range of field sites, with different levels of heavy metal pollution, in the West Midlands, UK. Measurements were complemented by analysis of liver and gill metallothionein protein by capillary electrophoresis. There was no significant difference in the metallothionein protein levels between fish of different rivers and there was no evidence of elevation of mRNA at the sites of highest metal exposure. The level of metal exposure (e.g. zinc, nickel and cadmium each ranging between 15 and 28 microg/l ) at the pH (7.5-8.5) of these rivers appears insufficient to elevate hepatic or gill metallothionein in chub. A lack of elevation of hepatic metallothionein mRNA in chub exposed to zinc, copper and manganese for 24 h and 10 days in the laboratory also suggests a non-responsiveness of this species.     

Long-term evolution of the aerosol debris cloud produced by the 2009 impact on Jupiter

We present a study of the long-term evolution of the cloud of aerosols produced in the atmosphere of Jupiter by the impact of an object on 19 July 2009 (Sánchez-Lavega, A. et al. [2010]. Astrophys. J. 715, L155-L159). The work is based on images obtained during 5 months from the impact to 31 December 2009 taken in visible continuum wavelengths and from 20 July 2009 to 28 May 2010 taken in near-infrared deep hydrogen-methane absorption bands at 2.1-2.3 μm. The impact cloud expanded zonally from ∼5000 km (July 19) to 225,000 km (29 October, about 180° in longitude), remaining meridionally localized within a latitude band from 53.5°S to 61.5°S planetographic latitude. During the first two months after its formation the site showed heterogeneous structure with 500-1000 km sized embedded spots. Later the reflectivity of the debris field became more homogeneous due to clump mergers. The cloud was mainly dispersed in longitude by the dominant zonal winds and their meridional shear, during the initial stages, localized motions may have been induced by thermal perturbation caused by the impact’s energy deposition. The tracking of individual spots within the impact cloud shows that the westward jet at 56.5°S latitude increases its eastward velocity with altitude above the tropopause by 5-10 m s⁻¹. The corresponding vertical wind shear is low, about 1 m s⁻¹ per scale height in agreement with previous thermal wind estimations. We found evidence for discrete localized meridional motions with speeds of 1-2 m s⁻¹. Two numerical models are used to simulate the observed cloud dispersion. One is a pure advection of the aerosols by the winds and their shears. The other uses the EPIC code, a nonlinear calculation of the evolution of the potential vorticity field generated by a heat pulse that simulates the impact. Both models reproduce the observed global structure of the cloud and the dominant zonal dispersion of the aerosols, but not the details of the cloud morphology. The reflectivity of the impact cloud decreased exponentially with a characteristic timescale of 15 days; we can explain this behavior with a radiative transfer model of the cloud optical depth coupled to an advection model of the cloud dispersion by the wind shears. The expected sedimentation time in the stratosphere (altitude levels 5-100 mbar) for the small aerosol particles forming the cloud is 45-200 days, thus aerosols were removed vertically over the long term following their zonal dispersion. No evidence of the cloud was detected 10 months after the impact.     

A New Interpretation of Centimetre-scale Variations in the Progress of Infiltration-driven Metamorphic Reactions: Case Study of Carbonated Metaperidotite, Val d'Efra, Central Alps, Switzerland

Progress () of the infiltration-driven reaction, 4olivine +5CO₂ + H₂O = talc + 5magnesite, that occurred during Barrovianregional metamorphism, varies at the cm-scale by a factor of3·5 within an 3 m³ volume of rock. Mineral and stableisotope compositions record that X_CO2, ¹⁸O_fluid, and ¹³C_fluidwere uniform within error of measurement in the same rock volume.The conventional interpretation of small-scale variations in in terms of channelized fluid flow cannot explain the uniformityin fluid composition. Small-scale variations in resulted insteadbecause (a) reactant olivine was a solid solution, (b) initiallythere were small-scale variations in the amount and compositionof olivine, and (c) fluid composition was completely homogenizedover the same scale by diffusion–dispersion during infiltrationand subsequent reaction. Assuming isochemical reaction, spatialvariations in image variations in the (Mg + Fe)/Si of the parentrock rather than the geometry of metamorphic fluid flow. Ifinfiltration-driven reactions involve minerals fixed in composition,on the other hand, spatial variations in do directly imagefluid flow paths. The geometry of fluid flow can never be determinedfrom geochemical tracers over a distance smaller than the oneover which fluid composition is completely homogenized by diffusion–dispersion. KEY WORDS: Alpine Barrovian metamorphism; diffusion; metamorphic fluid composition; metamorphic fluid flow; reaction progress     

Surface water–groundwater interaction and chemistry in a mineral-armored hydrothermal outflow channel, Yellowstone National Park, USA

Small quantities of groundwater interact with hydrothermal surface water to drive in-stream geochemical processes in a silica-armored hot-spring outflow channel in Yellowstone National Park, USA. The objective of this study was to characterize the hydrology and geochemistry of this unique system in order to (1) learn more about the Yellowstone Plateau’s subsurface water mixing between meteoric and hydrothermal waters and (2) learn more about the chemical and physical processes that lead to accumulation of streambed cements, i.e., streambed armor. A combination of hydrological, geochemical, mineralogical, microscopic, and petrographic techniques were used to identify groundwater and surface-water exchange. Interaction could be identified in winter because of differences in surface water and groundwater composition but interaction at other times of the year cannot be ruled out. Dissolved constituents originating from groundwater (e.g., Fe(II) and Mg) were traced downstream until oxidation and/or subsequent precipitation with silica removed them, particularly where high affinity substrates like cyanobacterial surfaces were present. Because the stream lies in a relatively flat drainage basin and is fed mainly by a seasonally relatively stable hot spring, this system allowed study of the chemical processes along a stream without the obscuring effects of sedimentation.     

Dynamic river–groundwater exchange in the presence of a saline,semi‐confined aquifer

Understanding groundwater–surface water exchange in river banks is crucial for effective water management and a range of scientific disciplines. While there has been much research on bank storage, many studies assume idealized aquifer systems. This paper presents a field‐based study of the Tambo Catchment (southeast Australia) where the Tambo River interacts with both an unconfined aquifer containing relatively young and fresh groundwater (<500 μS/cm and <100 years old) and a semi‐confined artesian aquifer containing old and saline groundwater (electrical conductivity > 2500 μS/cm and >10 000 years old). Continuous groundwater elevation and electrical conductivity monitoring within the different aquifers and the river suggest that the degree of mixing between the two aquifers and the river varies significantly in response to changing hydrological conditions. Numerical modelling using MODFLOW and the solute transport package MT3DMS indicates that saline water in the river bank moves away from the river during flooding as hydraulic gradients reverse. This water then returns during flood recession as baseflow hydraulic gradients are re‐established. Modelling also indicates that the concentration of a simulated conservative groundwater solute can increase for up to ~34 days at distances of 20 and 40 m from the river in response to flood events approximately 10 m in height. For the same flood event, simulated solute concentrations within 10 m of the river increase for only ~15 days as the infiltrating low‐salinity river water drives groundwater dilution. Average groundwater fluxes to the river stretch estimated using Darcy's law were 7 m³/m/day compared with 26 and 3 m³/m/day for the same periods via mass balance using Radon (²²²Rn) and chloride (Cl), respectively. The study shows that by coupling numerical modelling with continuous groundwater–surface water monitoring, the transient nature of bank storage can be evaluated, leading to a better understanding of the hydrological system and better interpretation of hydrochemical data. Copyright © 2015 John Wiley & Sons, Ltd.     

Characteristic features of the occurrence of gas-fluid emanations on the northeastern slope of Sakhalin Island, Sea of Okhotsk

This paper summarizes the results of combined studies in the areas of the occurrence of gas-fluid emanations in the water column, on the seafloor, and in the upper part of the sedimentary section on the northeastern slope of Sakhalin Island (Sea of Okhotsk). The phenomena typical of methane seeps were characterized in detail: the presence of acoustic anomalies, high concentrations of methane in the water and sediments, and the specific features of the sedimentary section (the textural and structural features, the character of the mineral inclusions and gas hydrates, and the chemical composition). The component composition of the gases (including the accompanying gas hydrates), which is almost free of heavy hydrocarbon homologues of methane; the light carbon isotopic compositions of the methane and carbonate concretions; and the low temperatures of the near-bottom water and sediments suggest that the occurrence of numerous methane emanations is related to gas generation in the upper part of the sedimentary sequence. No evidence was found for the existence of a deep center of gas formation within the seafloor area considered. Typical submarine mud volcanic edifices were also not found.