Problems with biogenic silica measurement in marginal seas

Surface sediment samples from the Bohai, Yellow Sea, and the Pacific were used to assess biogenic silica (BSi) content and to study uncertainties in BSi measurements. The contents of BSi in the Bohai and Yellow Sea are all less than 1%. The dissolution of BSi in sediments from the Bohai and Yellow Sea is very important to maintain high levels of silicate in the water column. The non-biogenic silica from clay minerals has an obvious effect on BSi of sediment samples in the Bohai and Yellow Sea with low BSi and high clay minerals. The solid to solution ratio was found to have a great influence on BSi measurement, which can induce uncertainties up to 75%. The effect of loss by sorption and centrifugation is negligible. Interlaboratory comparison of techniques for BSi measurement by the wet alkaline extraction technique of Mortlock and Froelich [Deep-Sea Res. 36 (1989) 1415-1426] with clay correction was suggested to give no significant differences. However, differences in sediment compositions and reagent to sample ratio may limit the application of the wet alkaline extraction method.     

Free spanning analysis of offshore pipelines

A rigorous procedure was established on the free span analysis of offshore pipelines. The closed form solutions of the beam–column equation, considering tension and compressive force, were derived for the various possible boundary conditions. The solutions can be used to find the natural frequencies of the free spans using the energy balance concept. The results can be applied to improve the current design codes. The improved procedure will yield more realistic calculations of the allowable free span lengths of offshore pipelines. Some calculations are included to present the sensitivity of the axial forces on the allowable free spanning lengths.     

Comments on the Gravity and Magnetic Anomalies of Saros Bay using Wavelet Approach

In this paper, residual and regional gravity and magnetic anomalies of Saros Bay are separated using wavelet method. Wavelet is one of the modern, stochastic image approaches processing technique in electronics. The vertical, horizontal and diagonal components of wavelet output are evaluated simultaneously and an underground model is obtained by suitable cross-sections. Thus the geological and tectonic properties of Saros Bay are extracted. Our proposed model is confirmed by deep and shallow seismic researches of Turkish Petroleum Cooperation (TPAO). The South-East region of Saros Graben is formed by strike slip Ganos Fault and Anafartalar reverse Fault that lies on the east of Ganos Fault. On the Northwest region, there is strike slip component fault resulting in the Enez Graben. Here we detected two new oval type geological structure, both of them starting from the Eastern direction of Canakkale Dardanelles and but one of them continuing through Gelibolu Peninsuls, while the other tending to the Enez Graben. We think that these structures are the ruins of a very old sea in this region. This revised version was published online in November 2006 with corrections to the Cover Date.     

Seismic evidence of small-scale lacustrine drifts in Lake Baikal (Russia)

High resolution, single-channel seismic sparker profiles across the Akademichesky Ridge, an intra-basin structural high in Lake Baikal (Russia), reveal the presence of small sediment mounds and intervening moats in the upper part of the sedimentary cover. Such features interrupt the generally uniform and even acoustic facies and are not consistent with the hemipelagic sedimentation, which is expected on such an isolated high and which would produce a uniform sediment drape over bottom irregularities. The influence of turbidity currents is excluded since the ridge is an isolated high elevated more than 600-1000 m above adjacent basins. The mounded seismic facies, including migrating sediment waves and non-depositional/erosional incisions, strongly suggest that sediment accumulation was controlled by bottom-current activity. We interpret the mounds as small-scale (< few tens of km² in area) lacustrine drifts. Four basic types of geometry are identified: 1) slope-plastered patch sheets; 2) patch drifts; 3) confined drifts; 4) fault-controlled drifts. The general asymmetry in the sedimentary cover of the ridge, showing thicker deposits on the NW flank, and the common location of patch drifts on the northeast side of small basement knolls indicate that deposition took preferentially place at the lee sides of obstacles in a current flowing northward or sub-parallel to the main contours. Deep-water circulation in the ridge area is not known in detail, but there are indications that relatively cold saline water masses are presently flowing out of the Central Basin and plunging into the deep parts of the North Basin across the ridge, a process that appears to be driven mainly by small differences in salinity. We infer that the process responsible for the observed bottom-current-controlled sedimentary features has to be sought in these large-scale water-mass movements and their past equivalents. The age of the onset of the bottom-current-controlled sedimentation, based on an average sedimentation rate of 4.0 cm/ky, is roughly estimated to be as least as old as 3.5 Ma, which is generally regarded as the age of the onset of the last major tectonic pulse of rift basin development in the Baikal region.     

Parameter identification of a compliant nonlinear SDOF system in random ocean waves by reverse MISO method

The determination of the drag and inertia coefficients, which enter into the wave force model given by Morison's equation, is particularly uncertain and difficult when a linear spectral model is used for ocean waves, and the structure is compliant and has nonlinear dynamic response. In this paper, a nonlinear System Identification method, called Reverse Multiple Inputs–Single Output (R–MISO) is applied to identify the hydrodynamic coefficients as well as the nonlinear stiffness parameter for a compliant single-degree-of-freedom system. Four different types of problems have been identified for use in various situations and the R–MISO has been applied to all of them. One of the problems requires iterative solution strategy to identify the parameters. The method has been found to be efficient in predicting the parameters with reasonable accuracy and has the potential for use in the laboratory experiments on compliant nonlinear offshore systems.     

Circalittoral Macrobenthic Assemblages of Strymonikos Gulf (North Aegean Sea)

Abstract. Six macrobenthic assemblages of the circalittoral zone found in Strymonikos Gulf, North Aegean Sea, are described and compared with the corresponding ones from other Mediterranean and Atlantic areas. For the delimination of these assemblages and the evaluation of the major environmental gradients governing their distribution, several numerical techniques were used.     

Stratal patterns in the southwestern margin of the Ulleung Basin off southeast Korea: sequence architecture controlled by back-arc tectonism

 Major variations in type and rate of tectonic movement in the southwestern margin of the Ulleung Basin coincide in time with changes in stratal patterns at succession boundaries, suggesting that the effect of tectonism was dominant for the development of sequence architecture. During the back-arc opening (16–12 Ma), the rise of relative sea level and the high rate of sediment supply gave rise to sequences with sigmoid progradational patterns. During the back-arc closing (12–6.5 Ma), fall- and rise-dominated relative sea-level fluctuations resulted in sequences with varying stratal patterns depending upon changes in deposition rate. The rise-dominated relative sea level has been prevalent during the later stage (6.5 Ma–Present) with low sedimentation rate. Received: 16 January 1996 / Revision received: 7 February 1997     

Geomorphological evidence for upslope canyon-forming processes on the northern KwaZulu-Natal shelf,SW Indian Ocean,South Africa

A geomorphological and statistical analysis of slope canyons from the northern KwaZulu-Natal continental margin is documented and compared with submarine canyons from the Atlantic margin of the USA. The northern KwaZulu-Natal margin is characterized by increasing upslope relief, concave slope-gradient profiles and features related to upslope growth of the canyon forms. Discounting slope-gradient profile, this morphology is strikingly similar to canyon systems of the New Jersey slope. Several phases of canyon incision indicate that downslope erosion is also an important factor in the evolution of the northern KwaZulu-Natal canyon systems. Despite the strong similarities between the northern KwaZulu-Natal and New Jersey slope-canyon systems, key differences are evident: (1) the concavity of the northern KwaZulu-Natal slope, contrasting with the ∼linear New Jersey slope; (2) the relative isolation of the northern KwaZulu-Natal canyons, rather than the dense clustering of the New Jersey canyons; and (3) the absence of strongly shelf-breaching canyons along the northern KwaZulu-Natal margin. In comparison with the New Jersey margin, we surmise a more youthful stage of canyon evolution, a result of either the canyons themselves being younger or the formative processes being less active. Less complicated patterns of erosion resulting from reduced sediment availability have developed in northern KwaZulu-Natal. The reduction in slope concavity on the New Jersey margin may be the result of grading of the upper slope by intensive headward erosion, a process more subdued—or less evident—on the KwaZulu-Natal margin.     

Comparison of methods for computing hydrodynamic characteristics of arrays of wave power devices

A comparison of methods for the calculation of the hydrodynamic characteristics of arrays of wave power devices is presented. In particular, the plane-wave approximation and an exact multiple scattering formulation have been used to compute exciting wave forces, hydrodynamic coefficients and q factors for arrays of interacting wave power devices. The results obtained are compared with each other, and accuracy aspects of the computations are stressed and critically assessed.     

Launching and joining of a product carrier of 30,500 DWT built in two sections

This paper describes the process of launching and joining of two sections of a product carrier of 30,500 DWT built at Dianca shipyard at Puerto Cabello, Venezuela. The specifications and characteristics of this ship are in line with the market requirements. This paper deals with the problems encountered during the decision of dividing the ship in two halves, use of syncrolift for launching and subsequent joining of two halves in the dry dock.