Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

Implementation of reconstructed geomorphologic units in landslide susceptibility mapping: the Melen Gorge (NW Turkey)

In the international literature, although considerable amount of publications on the landslide susceptibility mapping exist, geomorphology as a conditioning factor is still used in limited number of studies. Considering this factor, the purpose of this article paper is to implement the geomorphologic parameters derived by reconstructed topography in landslide susceptibility mapping. According to the method employed in this study, terrain is generalized by the contours passed through the convex slopes of the valleys that were formed by fluvial erosion. Therefore, slope conditions before landsliding can be obtained. The reconstructed morphometric and geomorphologic units are taken into account as a conditioning parameter when assessing landslide susceptibility. Two different data, one of which is obtained from the reconstructed DEM, have been employed to produce two landslide susceptibility maps. The binary logistic regression is used to develop landslide susceptibility maps for the Melen Gorge in the Northwestern part of Turkey. Due to the high correct classification percentages and spatial effectiveness of the maps, the landslide susceptibility map comprised the reconstructed morphometric parameters exhibits a better performance than the other. Five different datasets are selected randomly to apply proper sampling strategy for training. As a consequence of the analyses, the most proper outcomes are obtained from the dataset of the reconstructed topographical parameters and geomorphologic units, and lithological variables that are implemented together. Correct classification percentage and root mean square error (RMSE) values of the validation dataset are calculated as 86.28% and 0.35, respectively. Prediction capacity of the different datasets reveal that the landslide susceptibility map obtained from the reconstructed parameters has a higher prediction capacity than the other. Moreover, the landslide susceptibility map obtained from the reconstructed parameters produces logical results.     

Analysis of the 2003 Varunawat Landslide,Uttarkashi, India using Earth Observation data

Mass movements such as landslides in mountainous terrains are natural degradation processes and one of the most important landscape-building factors. Varunawat Parbat overlooking Uttarkashi town witnessed a series of landslides on 23 September 2003 and the debris slides and rock falls continued for 2 weeks. This landslide complex was triggered due to the incessant rainfall prior to the event, and its occurrence led to the blockage of the pilgrim route to Gangotri (source of the Ganges river) and evacuation of thousands of people to safer places. Though there was no loss of lives due to timely evacuation, heavy losses to the property were reported. High-resolution stereoscopic earth observation data were acquired after the incidence to study the landslide in detail with emphasis on the cause of the landslide and mode of failure. Areas along the road and below the Varunawat foothill region are mapped for landslide risk. It was found that the foothill region of the Varunawat Parbat was highly disturbed by man-made activities and houses are dangerously located below steep slopes. The potential zones for landslides along with the existing active and old landslides are mapped. These areas are critical and their treatment with priority is required in order to minimise further landslide occurrences.     

Monitoring Large-Scale Tests for Nuclear Waste Disposal

Two large-scale “in situ” demonstration experiments and their instrumentation are described. The first test (FEBEX Experiment) involves the hydration of a compacted bentonite barrier under the combined effect of an inner source of heat and an outer water flow from the confining saturated granite rock. In the second case, the progressive de-saturation of Opalinus clay induced by maintained ventilation of an unlined tunnel is analyzed. The paper shows the performance of different sensors (capacitive cells, psychrometers, TDR’s) and a comparison of fill behaviour with modelling results. The long term performance of some instruments could also be evaluated specially in the case of FEBEX test. Capacitive sensors provide relative humidity data during long transient periods characterised by very large variations of suction within the bentonite.     

DEFORMATION OF SEISMIC WAVELETS BY THIN LAYERS AND LAYERED BOUNDARIES*

Using plane wave theory and assuming a given input wavelet the shape of the reflected (or transmitted) wavelet from a layered boundary is derived. Several types of boundaries are considered, among them the weathered layer and a wedge shaped intermediate layer. Different angles of incidence and all internal multiples are taken into account. The examples shown in the figures can be used for a direct comparison between theoretical and observed shapes of reflected (or transmitted) wavelets from special boundaries.     

SOME EXPERIMENTS CONCERNING THE PRIMARY SEISMIC PULSE*

Recordings were made with three types of detector of the primary compressional (P) and shear (S) wave pulses generated by explosions in boreholes. Charge weights varied from 0.08 kg to 9.5 kg and detector distances varied from about 3 m to about 80 m. Scaling by the simple factor W^1/3 where W is the charge weight, enabled observations from different sized charges to be fitted to a single expression. Experiments were carried out in the Bunter sandstone and the London clay and both fluid and solid tamping were used. This variation in tamping had no significant effect on the P-waves but it may have affected the generation of SV-waves. In both media the P-wave energy carried at 30 m from the shot by frequencies less than 100 Hz decreased rapidly with depth and was usually 1–2 % of the available chemical energy for a shot depth of 15 m. The S-wave energy was much less than this, but was highly directional. The P-wave pulse had the appearance of a damped sinusoid in very good agreement with the predictions of the ‘equivalent radiator’ hypothesis. However, the surface of this radiator should be identified not with the blown cavity but with the surface at which the tensile stresses associated with the stress wave become less than the tensile strength of the rock. The predominant frequency for a 1 kg charge at a depth of 15 m was 24 Hz in the clay and 52 Hz in the sandstone. In these and similar media, therefore, an effort should be made to keep individual charges less than 1 kg in reflection shooting and less than 10 kg in refraction shooting. The value of Q was about 50 in clay and about 25 in the sandstone. These estimates are rather uncertain because of the small distances over which the pulses were observed. The Z-transforms of the sampled pulses indicated that they were all of minimum phase, or very near to it.     

THE LAUSANNE CONGRESS

The International Society for Photogrammetry held the Xlth International Congress at Lausanne during July 1968. The authors review the activities of five of the seven I.S.P. Commissions.     

Redistriution of Major Elements in the Alteration of Some Basic Lavas during Burial Metamorphism

An Ordovician geanticlinal marine sequence is exposed in theCentral West of New South Wales, Australia. The sequence containingbasic lavas, labile sedimentary, and proclastic rocks, has undergoneextensive adjustment during regional burial metamorphism. Thebasic lavas have a patchy coloration due to the formation ofalternation minerals of the prehnite-pumpellyite facies whichapperar to have formed during the metamorphism. The hererogeneousappearance of the basic lavas reflects a pronouced chemicaland mineralogical departure from the original composition. Twodiverging trends result. One leads to the production of a Ca-enrichedlithology, the other, which by far dominates in area at eachouterop, leads to a ‘spilitic’ lithology. The alterationdomains in many cases cross–cut all primary textural featureand their chemical variation does not correspond to likely variationsin the original lava composition.