Diffuse bifurcations engraving diverse shear bands in granular materials

Shear bands with characteristic spatial patterns observed in an experiment for a cubic or parallelepiped specimen of dry dense sand were simulated by numerical bifurcation analysis using the Cam‐clay plasticity model. By incorporating the subloading surface concept into the plasticity model, the model became capable of reproducing hardening/softening and contractive/dilative behavior observed in the experiment. The model was reformulated to be compatible with the multiplicative hyperelasto‐plasticity for finite strains. This enhanced constitutive model was implemented into a finite‐element code reinforced by a stress updating algorithm based on the return‐mapping scheme, and by an efficient numerical procedure to compute critical eigenvectors of elastoplastic tangent stiffness matrix at bifurcation points. The emergence of diamond‐ and column‐like diffuse bifurcation modes breaking uniformity of the materials, followed by the evolution of shear bands through strain localization, was observed in the analysis. In the bifurcation analysis of plane strain compression test, unexpected bifurcation modes, which broke out‐of‐plane uniformity and led to 3‐dimensional diamond‐like patterns, were detected. Diffuse bifurcations, which were difficult to observe by experiments, have thus been found as a catalyst creating diverse shear band patterns.     

Petrology and mineralogy of the Yamato-86751 CV3 chondrite

Abstract— The Y-86751 chondrite (CV3) consists of fine-grained Ca- and Al-rich inclusions (CAIs), amoeboid olivine inclusions (AOIs), spinel-rich inclusions, chondrules with and without dark rims, dark inclusions, isolated minerals, metal-sulfide aggregates, and matrix. Olivines in chondrules without dark rims and AOIs coexist with magnetite and show strong zoning from a magnesian core to a ferroan rim. Spinels in spinel-rich inclusions show similar zoning. This zoning seems to be caused by exchange reaction of olivine and spinel with an oxidized nebular gas prior to the accretion onto the parent body, and the Mg/Fe diffusion in olivines and spinels took place at a temperature of about 830–860 K. At the same time, enstatite in chondrules without dark rims was replaced by ferroan olivine at the grain boundaries. This feature suggests that chondrules without dark rims, fine-grained CAIs, spinel-rich inclusions, and AOIs have experienced oxidation in an oxidizing nebular gas. The oxygen fugacity of the oxidized nebular gas was >10^?27.3 bars at about 830 K, being more than 10⁴x larger than that of the canonical nebular gas. Magnetite occurs in the Y-86751 matrix in close association with Ni-rich taenite and Co-rich metal, and it was produced under a condition with the oxygen fugacity of ～10^?38 bars at a temperature of about 620–650 K. On the other hand, olivines in chondrules with dark rims and dark inclusions are magnesian and rich in MnO. They do not show such strong zoning. Probably they were in equilibrium with a nebular gas under a redox condition different from the oxidized nebular gas that produced the zoned olivines in chondrules without dark rims.     

Fragility function development and seismic loss assessment of expansion joints

Expansion joints are used as a special connection equipment between adjacent buildings to accommodate the relative motions generated by wind, thermal, or earthquake loads, but they often exhibit damage during severe earthquakes. The level of damage and safety factors required to avoid loss of function are not well considered in current design practices. The objective of this paper is to provide quantitative information on the seismic damage probability of common expansion joints and the associated repair costs. The designer and engineer can refer to this information as a basis for decision making in the selection of expansion joints. Four common types of expansion joints are considered: high- and standard-performance floor and wall expansion joints, whose damage states have been evaluated recently by the authors through shaking table tests. First, the fragility functions of expansion joints for seven damage patterns are developed utilizing the test results. Next, the vulnerability of expansion joints installed between adjacent building models is assessed via incremental dynamic analysis. The recommended level of safety factor to ensure the function of expansion joints is discussed. Finally, a procedure for cost-effective selection of expansion joints is introduced, where case studies are examined using buildings with different characteristics. The presented results are deemed to be beneficial for improving the design practice of expansion joints and for reducing future seismic loss.     

Mass distribution of Antarctic ordinary chondrites and the estimation of the fall-to-specimen ratios

Abstract— The cumulative mass distributions (mass range > 100 g) of each type of Japanese and U.S. Antarctic ordinary chondrites are compared with those of non-Antarctic falls and those obtained from the present-day flux of meteorites. The steeper slope of the mass distribution of Antarctic chondrites is indicative of the presence of several chondrite showers. The fall-to-specimen ratio of Antarctic ordinary chondrites larger than 100 g is about 1:2, indicating that half of them are shower components. The fall-to-specimen ratios of each group range from 1:1 to 1:6; those of the Japanese and U.S. Antarctic meteorite collections are 1:1 to 1:2 and 1:4 for H chondrites, 1:1 to 1:2 and 1:2 for L chondrites, and 1:2 and 1:6 for LL chondrites, indicating that the Japanese collection includes less abundant shower components than the U.S. collection. The fall-to-specimen ratios of each H4-6 and L4-6 type range from 1:1 to 1:4, and U.S. H6 and Japanese H4 have the low ratios of 1:4.     

Decadal variability shown by the arctic ocean hydrochemical data and reproduced by an ice-ocean model

The Arctic is experiencing a significant warming trend as well as a decadal oscillation. The atmospheric circulation represented by the Polar Vortex and the sea ice cover show decadal variabilities, while it has been difficult to reveal the decadal oscillation from the ocean interior. The recent distribution of Russian hydrochemical data collected from the Arctic Basin provides useful information on ocean interior variabilities. Silicate is used to provide the most valuable data for showing the boundary between the silicate-rich Pacific Water and the opposite Atlantic Water. Here, it is assumed that the silicate distribution receives minor influence from seasonal biological productivity and Siberian Rivers outflow. It shows a clear maximum around 100m depth in the Canada Basin, along with a vertical gradient below 100 m, which provides information on the vertical motion of the upper boundary of the Atlantic Water at a decadal time scale. The boundary shifts upward （downward）, as realized by the silicate reduction （increase） at a fixed depth, responding to a more intense （weaker） Polar Vortex or a positive （negative） phase of the Arctic Oscillation. A coupled ice-ocean model is employed to reconstruct this decadal oscillation.     

Boron in metapelites controlled by the breakdown of tourmaline and retrograde formation of borosilicates in the Yanai area,Ryoke metamorphic belt,SW Japan

Tourmaline-out isograd formed by the breakdown of tourmaline is defined in the upper amphibolite-facies metapelites in the Yanai area, Ryoke metamorphic belt, SW Japan. The rim composition of tourmaline progressively becomes aluminous with ascending metamorphic grade, and the chemical zoning of tourmaline is controlled by ^X□AlNa_–1Mg_–1 and MgTi^YAl_–2 vectors in low- to medium-grade zones where muscovite is stable, whereas it is controlled by Mg(OH)^YAl_–1O_–1, CaMgO^X□_–1 ^YAl_–1(OH)_–1 and MgTi^YAl_–2 vectors in further higher–grade, muscovite-unstable zones. The size of tourmaline increases drastically where breakdown of muscovite+quartz takes place, probably due to the growth of tourmaline during breakdown of muscovite. On the high-temperature side of the tourmaline-out isograd, depletion of whole-rock boron is observed. Escape of boron-bearing melt or the fluid evolved from the melt during its crystallization probably caused this depletion, although locally trapped, boron-bearing melt or fluid formed irregularly shaped tourmaline and dumortierite during retrograde metamorphism.     

Specific accumulation of persistent organochlorines in bluefin tuna collected from Japanese coastal waters

Concentrations of persistent organochlorines (OCs) such as PCBs, DDTs, chlordanes (CHLs), HCHs and HCB were determined in the liver of bluefin tuna (Thunnus thynnus) collected from Japanese coastal waters in order to elucidate accumulation profiles and to evaluate the suitability of this species as a biomonitor for pollution in the open sea ecosystem. Concentrations of PCBs, DDTs and CHLs in bluefin tuna increased significantly with body length (30–190 cm). HCHs and HCB residues were comparable among all the sampling regions, and the levels of these chemicals did not show correlation with body length. These results suggest significance of dietary uptake of PCBs, DDTs and CHLs compared to the intake via the gill. On the other hand, equilibrium partitioning with ambient water is a major determinant of the levels of HCHs and HCB in tuna. Body-length normalized values (BLNV) of PCBs, DDTs and CHLs concentrations in bluefin tuna were calculated using the linear regression equation obtained from the plot of concentrations and body length. BLNV of these chemicals on a lipid wt basis, which was adjusted for 100 cm body length, were indicative of the present state water pollution by PCBs, DDTs and CHLs. These results suggest that bluefin tuna is a suitable bioindicator for monitoring OCs contamination in the open sea ecosystem.     

Respiration rates of copepod larvae and a ciliate from a tropical sea

The respiration rates of copepod larvae and a ciliate (Placus sp.) from a tropical sea were measured with an oxygen electrode method. The general range of body size of these animals was 40–161m (diameter equivalent to a sphere), and the respiration rate measured was 0.00076–0.00176l O₂ (animal)^–1h^–1 (or 2.02–9.05l O₂ (mg wet weight)^–1h^–1) at 25.5–29.2C. There was no marked difference observed between the respiration rates of copepod larvae and the ciliate. The respiration rates obtained here are relatively higher than the rates of other similar sized protozoans found in the literature, but lower than the rate extrapolated from larger planktonic copepods in tropical seas.The present results and other information available on microzooplankton biomass suggest that microzooplankton respiration is of near equal importance to that of net zooplankton in the study of energy flow through tropical, pelagic ecosystems.     

Has the plate boundary shifted from central Hokkaido to the eastern part of the Sea of Japan?

A NS trending Cenozoic fold-and-thrust belt has developed in the western part of the Hidaka Collision Zone (HCZ), central Hokkaido, Japan. A quantitative estimation of the late Cenozoic convergence rate at the front of the Hidaka thrust system is important in revealing the plate tectonic framework around northern Japan. High-resolution seismic reflection profiling across the active fault-related folds was carried out to ascertain the temporal change in the crustal shortening rate. Overlapping ramp anticlines and growth folds within thrust sheets were examined using balanced cross-sections combined with industry seismic and drilling data. The rate of shortening was examined using a 3.5 Ma horizon and late Quaternary horizons at 115 and 41 ka. These horizons show that the convergence rate of the Hidaka thrust system has not decreased during the last 3.5 Ma. This suggests that the plate boundary between the Eurasian (Amurian) and North American (Okhotsk) plates has not jumped from the central part of Hokkaido to the eastern part of the Sea of Japan since 3.5 Ma and that a significant amount of plate convergence is still being absorbed in the Hidaka Collision Zone.     

Regional occurrence of orthopyroxene-bearing basic rocks in the Yanai district, southwest Japan: Evidence for granulite-facies Ryoke metamorphism

Abstract   The present paper is reporting on the regional occurrence of orthopyroxene-bearing basic rocks from the Ryoke Metamorphic Belt in the Yanai district, southwest Japan. Their localities are confined to the highest-grade zone of the area (i.e. the garnet–cordierite zone, where garnet coexists with cordierite, K-feldspar and biotite in pelitic rocks). Orthopyroxene coexists with quartz and hydrous minerals such as biotite, cummingtonite and hornblende, and in some cases with clinopyroxene, suggesting that the highest grade of the Ryoke metamorphism reached a low-temperature subfacies of the granulite facies, contrary to the upper amphibolite facies as previously asserted.