High-resolution facies and porosity models of the upper Jurassic Arab-D carbonate reservoir using an outcrop analogue, central Saudi Arabia

Subsurface models of hydrocarbon reservoirs are coarse and of low resolution when compared with the actual geologic characteristics. Therefore, the understanding of the three-dimensional architecture of reservoir units is often incomplete. Outcrop analogues are commonly used to understand the spatial continuity of reservoir units. In this study, a Late Jurassic outcrop analogue for the Arab-D reservoir of central Saudi Arabia was used to build a high-resolution model that captures fine geologic details. Subsurface reservoir lithofacies were matched with those from the studied outcrop, and porosity values derived from published core and well log data from the Ain Dar, Uthmanyah, and Shudgum areas of the Ghawar Field, eastern Saudi Arabia, were then applied to the equivalent lithofacies in the outcrop. Maximum, minimum, and average subsurface porosity for each lithofacies were distributed in the facies model using a geostatistical algorithm to produce nine porosity models for the field data. Several realisations were run to visualise the variability in each model and to quantitatively measure the uncertainty associated with the models. The results indicated that potential reservoir zones were associated with grainstone, packstone, and some wackestone layers. Semivariogram analysis of the lithofacies showed good continuity in the N-S direction and less continuity in the E-W direction. The high-resolution lithofacies models detected permeability barriers and isolated low porosity bodies within the potential reservoir zones. This model revealed the porosity distribution in areas smaller than one cell in the subsurface model and highlighted the uncertainty associated with several aspects of the model.     

Hydrocarbons generation potential of the Jurassic–Lower Cretaceous Formation, Ajeel field, Iraq

Organic geochemical analysis and palynological studies of the organic matters of subsurface Jurassic and Lower Cretaceous Formations for two wells in Ajeel oil field, north Iraq showed evidences for hydrocarbon generation potential especially for the most prolific source rocks Chia Gara and Sargelu Formations. These analyses include age assessment of Upper Jurassic (Tithonian) to Lower Cretaceous (Berriasian) age and Middle Jurassic (Bathonian–Tithonian) age for Chia Gara and Sargelu Formations, respectively, based on assemblages of mainly dinoflagellate cyst constituents. Rock-Eval pyrolysis have indicated high total organic carbon (TOC) content of up to 18.5 wt%, kerogen type II with hydrogen index of up to 415 mg HC/g TOC, petroleum potential of 0.70–55.56 kg hydrocarbon from each ton of rocks and mature organic matter of maximum temperature reached (T_max) range between 430 and 440 °C for Chia Gara Formation, while Sargelu Formation are of TOC up to 16 wt% TOC, Kerogen type II with hydrogen index of 386 mg HC/g TOC, petroleum potential of 1.0–50.90 kg hydrocarbon from each ton of rocks, and mature organic matter of T_max range between 430 and 450 °C. Qualitative studies are done in this study by textural microscopy used in assessing amorphous organic matter for palynofacies type belonging to kerogen type A which contain brazinophyte algae, Tasmanites, and foraminifera test linings, as well as the dinoflagellate cysts and spores, deposited in dysoxic–anoxic environment for Chia Gara Formation and similar organic constituents deposited in distal suboxic–anoxic environment for Sargelu Formation. The palynomorphs are of dark orange and light brown, on the spore species Cyathidites australis, that indicate mature organic matters with thermal alteration index of 2.7–3.0 for the Chia Gara Formation and 2.9–3.1 for the Sargelu Formation by Staplin's scale. These characters have rated the succession as a source rock for very high efficiency for generation and expulsion of oil with ordinate gas that charged mainly oil fields of Baghdad, Dyala (B?aquba), and Salahuddin (Tikrit) Governorates. Oil charge the Cretaceous-Tertiary total petroleum system (TPS) are mainly from Chia Gara Formation, because most oil from Sargelu Formation was prevented passing to this TPS by the regional seal Gotnia Formation. This case study of mainly Chia Gara oil source is confirmed by gas chromatography–mass spectrometry analysis for oil from reservoirs lying stratigraphically above the Chia Gara Formation in Ajeel and Hamrine oil fields, while oil toward the north with no Gotnia seal could be of mainly Sargelu Formation source.     

Geoheritage values of one of the largest maar craters in the Arabian Peninsula: the Al Wahbah Crater and other volcanoes (Harrat Kishb, Saudi Arabia)

Al Wahbah Crater is one of the largest and deepest Quaternary maar craters in the Arabian Peninsula. It is NW-SE-elongated, ～2.3 km wide, ～250 m deep and surrounded by an irregular near-perpendicular crater wall cut deeply into the Proterozoic diorite basement. Very few scientific studies have been conducted on this unique site, especially in respect to understanding the associated volcanic eruption processes. Al Wahbah and adjacent large explosion craters are currently a research subject in an international project, Volcanic Risk in Saudi Arabia (VORiSA). The focus of VORiSA is to characterise the volcanic hazards and eruption mechanisms of the vast volcanic fields in Western Saudi Arabia, while also defining the unique volcanic features of this region for use in future geoconservation, geoeducation and geotourism projects. Al Wahbah is inferred to be a maar crater that formed due to an explosive interaction of magma and water. The crater is surrounded by a tephra ring that consists predominantly of base surge deposits accumulated over a pre-maar scoria cone and underlying multiple lava flow units. The tephra ring acted as an obstacle against younger lava flows that were diverted along the margin of the tephra ring creating unique lava flow surface textures that recorded inflation and deflation processes along the margin of the post-maar lava flow. Al Wahbah is a unique geological feature that is not only a dramatic landform but also a site that can promote our understanding of complex phreatomagmatic monogenetic volcanism. The complex geological features perfectly preserved at Al Wahbah makes this site as an excellent geotope and a potential centre of geoeducation programs that could lead to the establishment of a geopark in the broader area at the Kishb Volcanic Field.     

Productivity,carbon assimilation and intra-annual change in tropical reef platform seagrass communities of the Torres Strait,north-eastern Australia

Detailed data on seagrass distribution, abundance, growth rates and community structure information were collected at Orman Reefs in March 2004 to estimate the above-ground productivity and carbon assimilated by seagrass meadows. Seagrass meadows were re-examined in November 2004 for comparison at the seasonal extremes of seagrass abundance. Ten seagrass species were identified in the meadows on Orman Reefs. Extensive seagrass coverage was found in March (18,700 ha) and November (21,600 ha), with seagrass covering the majority of the intertidal reef-top areas and a large proportion of the subtidal areas examined. There were marked differences in seagrass above-ground biomass, distribution and species composition between the two surveys. Major changes between March and November included a substantial decline in biomass for intertidal meadows and an expansion in area of subtidal meadows. Changes were most likely a result of greater tidal exposure of intertidal meadows prior to November leading to desiccation and temperature-related stress.     

Application of a revised hydrostratigraphical classification and nomenclature to the Mesozoic and Cenozoic succession of Saudi Arabia

At the dawn of the 21st century many parts of the world are suffering a shortage of water resources. Arid and semi-arid areas in particular are facing challenges and increasing pressure is being put on their groundwater management plans. Such a situation created an urgent need to put forward a design for classification and nomenclature that can help to differentiate highly productive zones from small locally exploited productive zones. A previously proposed hydrostratigraphical classification and nomenclature scheme is revised, modified, and applied to the Mesozoic-Cenozoic sedimentary succession of Saudi Arabia. The scheme utilised in the present paper is modified to include, in addition, productivity, water quality criteria, usability, and recharge as criteria reflecting the hydrogeological importance of the productive zones.The Triassic Sudair Mega-aquitard forms the lower hydrostratigraphic boundary for the Ad-Dahna'a Aquasystem. The Ad-Dahna'a Aquasystem comprises two aquagroups: the Riyadh and Rub'Al-Khali Aquagroups. Each aquagroup is in turn subdivided into superaquifers, aquifers and possibly subaquifers, separated by aquitards of different ranks. The physical and hydrogeological characteristics of each unit are also discussed.     

Parameters affect foaming and foam stability during foam drilling

The authors presented indoor practice experiments of parameters affect on foaming and foam stability. Experiments were carried out and special equipments were used to determine foaming and foam stability; tests were tabulated and charted. The effects of chemical and physical parameters on foaming and foam stability have been conducted.     

Application of Artificial Intelligence to Estimate Oil Flow Rate in Gas-Lift Wells

Natural Resources Research - Optimization and monitoring schemes for oil well and reservoir system require accurate estimation of production rate. Real-time monitoring is conducted typically using...     

Causes of rockfalls in Al-Huwayshah area, Yemen

According to topography of Yemen, most areas and villages are located at obligated crest, toe of mountain and under cliffs. Therefore Al-Huwayshah consisting of Tawilah sandstone group is characterized by steep slope reach to 90° in some areas. This area is affected by strong tectonic movements and faults that occurred during the geological epochs. This effect enhances to find out fractures and joints as well as the rocks become brittle and ready to slide depending on the position of area. And there are some fractures and joints on the surface of the areas due to tectonic movement associated with opening the Red Sea and Gulf of Aden. The rainfalls, fractures, joints, earthquakes, gravity, vegetations, temperatures and human activities play a big role in the processes of rockfalls and landslides in this area. All those factors are considered as the basic causes and catalyzed factors for occurrence of rockfall in the studide area. In addition, the authors carried out laboratory test for many rock samples to get the physical properties of the rocks.     

Unsteady hydromechanics of a steering podded propeller unit

Unsteady forces, torques and bending moments were predicted for a model podded propulsor unit at various azimuth angles. Predictions in time history include propeller shaft thrust, propulsor unit thrust, normal forces to the propeller shaft bearing, total forces acting on the propulsor unit, propeller shaft torque, blade spindle torque, in-plane and out-of-plane bending moments, and propulsor unit stock shaft torque and bending moments. Analysis was performed for averaged forces and their fluctuations as well. A time-domain unsteady multi-body panel method code, PROPELLA, was further developed for this prediction work. Predictions were compared with a set of time averaged in-house experimental data for a puller-type podded propulsor configuration in the first quadrant operation. Unsteady fluctuations of forces were predicted numerically. Analysis was made for the bending moment on propeller blades, shaft and the propulsor unit stock shaft for azimuth angles from 0° to 45°. It indicates that the magnitude and fluctuation of the forces are significant and they are essential for structural strength and design optimization. The predicted bending moment and global forces on the propulsor unit provide some useful data for ship maneuvering motion and simulation in off-design conditions.