Investigation of physicochemical parameters in drinking water resources and health risk assessment: a case study in NW Iran

In this study, the amount of cyanide in gold mine tailings is modeled as conceptual, statistical, and mathematical to determine environmental risk level and also to estimate the fate and transport of cyanide in tailings. Therefore, 116 points were selected for sampling from three levels of gold mine tailings and analyzed by colorimetric method. As a matter of fact, new hybrid modeling methods such as AdaBoost, Support Vector Machine, Linear Discriminant Analysis, and Random Forest were used in estimation. In current study, The AdaBoost method was qualified as the best one by minimum estimation error (less than 10%). The model derived from the AdaBoost method shows an average variation of 581 g/day in the volume of cyanide tailings. Thus, the important results of this paper are the presentation of 3D numerical and especially conceptual models according to the 3D cyanide variation in the sulfide gold mine tailings and governing physic/chemical parameters. These qualitative and quantitative results can be used for the management of tailings dam and prevention of the contaminant extension.     

Effects of an outer thin stably stratified layer on planetary dynamos

The presence of outer stably stratified layers in planetary cores has been suggested for Earth, Saturn and Mercury. In this study, we use a 3-D numerical dynamo model to investigate the effects of a thin stable layer surrounding a convecting interior on the produced magnetic field. We find that a stable layer can destabilize the field morphology through a thermal wind that produces unfavorable zonal flows throughout the core. The direction of these zonal flows is prograde in equatorial regions, unlike a model with no stable layer that has retrograde equatorial flows. Our models therefore suggest that the Earth does not have a stable layer since we observe a westward drift as opposed to an eastward drift. For Saturn, we find that due to coupling of the flows in the stable and unstable layers, the layer does not act to shear out the non-axisymmetry in the observed magnetic field, and therefore cannot explain Saturn’s axisymmetric magnetic field. For Mercury, we find that if the stable layer is thin, it can actively produce strong or weak surface fields and not necessarily attenuate smaller scale features through the skin effect.     

Simulating soil loss rate in Ekbatan Dam watershed using experimental and statistical approaches

Reservoir sedimentation resulting fromwater erosion is an important environmental issue inmany countries where storage of water is crucial for economic and agricultural development.Therefore,this paper reports results from analysis of the soil hydrological response,i.e.soil water erosion,to simulated rainfall resulting in sediment accumulation at the reservoir of Ekbatan Dam(Hamedan province,Iran).Also,another objective of this study was to simulate the future trends in reservoir sedimentation(soil loss rate;SLR)from indoor rainfall simulator data by multiple linear regression(MLR)and Artificial Neural Networks(ANNs).For this research,three sampling points with different types of soils were chosen including clayey sand soil(SC-SM),silty soil(ML),and clayey soil(CL).The input parameters were slope gradient(sin θ),soil type(St),water content(w),dry density(γd),shear strength(τ),unconfined compressive strength(qu),permeability(k),and California bearing ratio(CBR).Using MLR and ANN methods,7 models were developed with 2 constant predictors(i.e.sin θ and St)and 6 free predictors which were added in each step one by one.Among MLR models,model 5 with St,sin θ,γd,τ,w,and qu as input parameters was statistically significant.Among ANN models,model 4 with St,sin θ,?d,τ,and w as input parameters,9 nodes,and 1 hidden layer was statistically significant.The root mean square error(RMSE),mean error(ME),and correlation coefficient(R)values were 1.433 kg/m^2 h,0.0195 kg/m^2 h,and 0.698 for the MLRmodel and 0.38 kg/m^2 h,0.151 kg/m^2 h,and 0.98 for the ANN model,respectively.These results show that the ANN model could better predict the SLR in comparison to the MLR model.The results also demonstrate that shear strength,among the strength parameters,had a greater impact on the SLR than compressive strengths(qu and CBR).Last but not the least,the reservoir sedimentationwas estimated for all methods and compared with the observed data.The results indicate that the ANN model is more appropriate for forecasting/simulating the sediment yield for a small watershed.     

Long-term change of surface temperature in water bodies around Iran – Caspian Sea,Gulf of Oman,and Persian Gulf – using 2001–2015 MODIS data

ABSTRACT

To answer the question “what has changed the surface temperatures of water bodies around Iran under climate change conditions,” Moderate Resolution Imaging Spectroradiometer (MODIS) sea surface temperature (SST) data with 9.2-km spatial resolution and monthly time step were evaluated. A significant increasing trend was obtained using Pearson’s correlation coefficient and Mann-Kendall trend test on data from the Caspian Sea (June) and the Southern Gulfs (September). High correlations of 0.69 and 0.97 between remotely sensed data and ERA-Interim reanalysis data were also obtained for June and September, respectively. To assess the impact of some climatic parameters on SST variability in those two months, zonal and meridional wind at 10 m, wind speed at 10 m, air temperature at 2 m, and mean sea level pressure were evaluated. High correlations between meridional wind and the Southern Gulf SST, and meridional wind and Caspian SST were ?0.86 and 0.75, respectively. Moreover, the results showed an important role of air temperature (0.96) and sea level pressure (?0.77) in the rising temperature trends of the Southern Gulfs. Wind speed was also detected in both regions as a booster of the trend.     

Short‐time (<10 ka) denudation rates as a marker of active folding in the Zagros Fold Belt (Iran)

Coupling between tectonics and surface processes is usually ill‐quantified as other factors such as climate and lithology affect the later. We provide catchment‐wide ¹⁰Be denudation rates of the Mand catchment in the Zagros Fold Belt (Iran) to infer correlations between these rates and ongoing tectonic shortening in the region. Denudation rates are generally low (~0.05–0.1 mm/a) but increase to ~1 mm/a near the Halikan anticline, where changes in precipitation, lithology or hillslope gradient are insignificant. The denudation rates upstream and downstream of the Halikan anticline are consistent with the GPS convergence rates in these areas. The sharp increase in denudation rates over the Halikan anticline denotes its growth as previously detected from terrace incision. It also reveals small wavelength coupling between crustal deformation and erosion. Denudation rates are therefore a useful and sensitive tool that helps constraining non‐brittle active tectonics such as folding of a sedimentary cover.     

Optimal Port Design Minimizing Standing Waves with A Posteriori Long Term Shoreline Sustainability Analysis

China Ocean Engineering - Optimization theory is applied to a coastal engineering problem that is the design of a port. This approach was applied to the redesign of La Turballe Port in order to...     

Optimally locating additional drill holes in three dimensions using grade and simulated annealing

Average kriging variance is a standard tool used in optimization of the location of additional drill holes. However, this tool cannot distinguish between areas with different priorities. This limitation could be eliminated by using weighted average kriging variance. This paper extends the problem of optimal location to three dimensional cases, use grade as a weight and search optimum locations by simulated annealing. Weighted average kriging variance is used as objective function. The method is applied to a copper deposit. Results have shown that weighting of the estimation variance with ??grade?? is effective only when the difference among the grades estimated for different blocks is considerable.     

Early Berriasian ammonites from Shal, Talesh region (NW Alborz Mountains, Iran)

An early Berriasian (Berriasella jacobi Zone) ammonite fauna is described for the first time from the Alborz Mountains in northwest Iran. It has been collected from a section located near the village of Shal (Talesh region); in addition to rare phylloceratids, lytoceratids and Neolissoceras, the majority of ammonites belong to the neocomitid subfamily Berriasellinae. With the exception of a new genus and species, Taleshites fuersichi, these taxa are common in European and North African Tethyan successions. Associated calpionellids confirm the early Berriasian age of the ammonite-bearing levels.     

A detailed receiver function image of the lithosphere beneath the Kopeh-Dagh (Northeast Iran)

The Kopeh-Dagh fold belts are among the most seismically active areas in Northeastern Iran, which build the northern part of the Alpine–Himalayan orogen in western Asia. They act as the abrupt northeastern limit to active deformation in Iran. We perform a combined P and S receiver function analysis to detect the major discontinuities within the lithosphere beneath Northeast Iran. Our results obtained from 12 short period and broadband seismological stations significantly map the lateral variations of the Moho boundary. Based on P receiver functions, we show that the Moho depth varies from ～43 km beneath the southern Kopeh-Dagh foreland basin to ～49 km below the northern part of the basin. S receiver functions reliably reveal an average Moho depth of ～50–55 km beneath the Kopeh-Dagh mountain range showing the regional shortening in response to the collision of Arabia with Eurasia. Furthermore, we observe clear conversions with negative polarity at ～8.5–9.5 s in S receiver functions, which could be related to the conversion at the lithosphere–asthenosphere boundary. This may show a relatively thin continental lithosphere of about 85–95 km beneath the Kopeh-Dagh implying that the lithosphere was influenced by geodynamical reworking processes in the past.