The Ganges and Brahmaputra rivers in Bangladesh: basin denudation and sedimentation

Every year the Ganges and Brahmaputra rivers in Bangladesh transport 316 and 721 million tonnes of sediment, respectively. These high loads of suspended sediment reflect the very high rate of denudation in their drainage basins. The average mechanical denudation rate for the Ganges and Brahmaputra basins together is 365 mm 10³ yr⁻¹. However, the rate is higher in the Brahmaputra Basin than that in the Ganges Basin. Several factors, including mean trunk channel gradient, relief ratio, runoff, basin lithology and recurring earthquakes are responsible for these high denudation rates. Of the total suspended sediment load (i.e. 1037 million tonnes) transported by these rivers, only 525 million tonnes (c. 51% of the total load) are delivered to the coastal area of Bangladesh and the remaining 512 million tonnes are deposited within the lower basin, offsetting the subsidence. Of the deposited load, about 289 million tonnes (about 28% of the total load) are deposited on the floodplains of these rivers. The remaining 223 million tonnes (about 21% of the total load) are deposited within the river channels, resulting in aggradation of the channel bed at an average rate of about 3·9 cm yr⁻¹. Although the Brahmaputra transports a higher sediment load than the Ganges, the channel bed aggradation rate is much higher for the Ganges. This study also documents a wide range of interannual, seasonal and daily variation in suspended sediment transport and water discharge. Interannual variation in sediment deposition within the basin is also suggested. Copyright © 1999 John Wiley & Sons, Ltd.     

Sediment deposition from flow at low gradients into a buffer strip—a critical test of re-entrainment theory

The spatial and size distribution of sediment deposited from short periods of overland flow due to the effect of a simulated grass buffer strip was measured for low slopes of 1.6, 3.4 and 5.1%. These data were analysed so as to critically evaluate two alternative models of the process of re-entrainment of recently deposited sediment. A model of re-entrainment, previously thought to be appropriate only for a steady-state or equilibrium situation, was found to give better agreement with experiments than did a model previously used in the literature on this subject.     

Hydraulic parameters in channels with wall vegetation and gravel bed

In this experimental study,field observations and laboratory experiments have been carried out to assess the impacts of the vegetated channel walls and aspect ratio on flow velocity profiles,shear stress distribution and roughness coefficient of channel.Results show that the presence of vegetation cover on channel wall causes deviation of the Reynolds stress distribution from the linear one under uniform flow condition.It is also noticed that the Reynolds stress distribution is influenced by the aspect rati...     

Application of diffracted wave analysis to time‐lapse seismic data for CO2 leakage detection

Time‐lapse seismic analysis is utilized in CO₂ geosequestration to verify the CO₂ containment within a reservoir. A major risk associated with geosequestration is a possible leakage of CO₂ from the storage formation into overlaying formations. To mitigate this risk, the deployment of carbon capture and storage projects requires fast and reliable detection of relatively small volumes of CO₂ outside the storage formation. To do this, it is necessary to predict typical seepage scenarios and improve subsurface seepage detection methods. In this work we present a technique for CO₂ monitoring based on the detection of diffracted waves in time‐lapse seismic data. In the case of CO₂ seepage, the migrating plume might form small secondary accumulations that would produce diffracted, rather than reflected waves. From time‐lapse data analysis, we are able to separate the diffracted waves from the predominant reflections in order to image the small CO₂ plumes. To explore possibilities to detect relatively small amounts of CO₂, we performed synthetic time‐lapse seismic modelling based on the Cooperative Research Centre for Greenhouse Gas Technologies (CO2CRC) Otway project data. The detection method is based on defining the CO₂ location by measuring the coherency of the signal along diffraction offset‐traveltime curves. The technique is applied to a time‐lapse stacked section using a stacking velocity to construct offset‐traveltime curves. Given the amount of noise found in the surface seismic data, the predicted minimum detectable amount of CO₂ is 1000–2000 tonnes. This method was also applied to real data obtained from a time‐lapse seismic physical model. The use of diffractions rather than reflections for monitoring small amounts of CO₂ can enhance the capability of subsurface monitoring in CO₂ geosequestration projects.     

Study on elastic response of structures to near-fault ground motions through record decomposition

Accelerograms recorded near active faults have some important characteristics that make them different from those recorded in far-fault regions. High-frequency components in acceleration records and long-period velocity pulses are among notable specifications of such ground motions. In this paper, a moving average filtering with appropriate cut-off frequency has been used to decompose the near-fault ground motions into two components having different frequency contents: first, Pulse-Type Record (PTR) that possesses long-period pulses; second, the relatively high-frequency BackGround Record (BGR), which does not include large velocity pulses. Comparing the results with those extracted through wavelet analysis shows that moving average filter is an appropriate and efficient tool for near-fault records decomposition. The method is applied to decompose a suite of 91 selected near-fault records and the elastic response of structures is examined through their response to the decomposed parts. The results emphasizes that in contrast with ordinary far-fault earthquake records, response spectra of near-fault ground motions typically have two distinct local peaks, which are representatives of the high- and low-frequency components, i.e., BGR and PTR, respectively. Moreover, a threshold period is identified below which the response of structures is dominated by BGR while PTR controls the response of structures with periods longer than this period.     

A new empirical equation for predicting the maximum initial amplitude of submarine landslide-generated waves

Landslides - The accurate prediction of landslide tsunami amplitudes has been a challenging task given large uncertainties associated with landslide parameters and often the lack of enough...     

Uncertainty quantification of landslide runout motion considering soil interdependent anisotropy and fabric orientation

Landslides - Natural soils often exhibit an anisotropic fabric pattern as a result of soil deposition, weathering, or filling. This paper aims to investigate the effect of soil interdependent...     

Prediction of Land Subsidence Under Cyclic Pumping Based on Laboratory and Numerical Simulations

In this study subsidence due to groundwater withdrawal was investigated. Kerman Province in Iran is struggling with land subsidence problem due to extensive groundwater withdrawal mainly for farming. The rate and type of groundwater withdrawal has very important impact on settlement rate. In this research, effective parameters on land subsidence caused by groundwater withdrawal were determined by laboratory tests. Sampling had done up to depth of 300 m mainly with remolded specimens from Shams-abad, Nouq plain in Kerman province. Similar to the field preconsolidation pressure was applied on specimens in the laboratory. Rate of applied stress on prepared specimens was similar to effect of oscillation of groundwater level. In order to model the actual soil behavior in the laboratory, one-dimensional consolidation device (odometer) was adopted for testing. In these tests, the effect of loading caused by seasonal oscillation of groundwater table is considered by means of cyclic loading in the testing which has great effect on rate of settlements. The results of tests show that when the water table level periodically increases and decreases the amount of settlement decrease, comparing with the case when the groundwater table drop to a constant level. In order to predict the further effects of groundwater level oscillation and actual field condition on land subsidence, a finite element model based on Biots’ three-dimensional consolidation theory was developed. After calibration of finite element model with laboratory tests, this model was used for prediction the effect of groundwater level oscillation on actual field conditions.     

Cavity effect on Rayleigh wave dispersion and P-wave refraction

Sinkholes and cavities can represent serious hazards to human safety and urban infrastructures,cause roadbed subsidence,and so on.It is therefore essential to evaluate various sinkholes in different depths and sizes to assess the risk of collapse.This paper evaluates the effect of different cavities on Rayleigh-wave propagation and body(P)wave refraction.Rayleigh(R)wave propagation is analyzed according to the classical multi-channel analysis of surface waves(MASW)method also considering the R-wave backscattering.Synthetic seismic traces are computed by means of finite element modeling(FEM)for cavity and intrusion at different depths and sizes.Furthermore,field acquisition data is used to verify the detection effect of a cavity on R-and P-waves.The results show that the presence of backscattered R-waves and the changes in the R-wave velocity spectrum can help in cavity identification.Additional possible evidence is represented by significant changes in the refraction travel times over the cavity location.It can be concluded that the field data are in good agreement with the synthetic,and it could be effective to consider the results of both R-and P-wave analysis in order to efficiently identify the cavities.