Vulnerability of Kuwait coast to sea level rise

Assessing coastal vulnerability to sea level rise (SLR) at local and regional scales is a fundamental step for designing successful long-term coastal management plans. This study was thus designed to assess Kuwait coastal vulnerability to SLR at four scenarios (.5, 1, 1.5 and 2 m). Potential inundated areas and the number of people at risk were estimated based on these SLR scenarios. A coastal vulnerability index (CVI) map of Kuwait was then computed based on the lowest scenario using eight parameters: elevation, coastal slope, geomorphology, distance to 20-m isobath, population, land use, cultural heritage and transportation. The geographic distribution of inundated areas at an SLR of .5 m revealed that the northern islands of Kuwait and coastal areas along Kuwait Bay would be highly impacted, whereas the coastal area near Shuaibah Port was the most influenced among the southern coasts. Most of the coastal area exhibited a moderate vulnerability to SLR, especially the northern islands. This study presented an initial vulnerability assessment for Kuwait coasts to SLR, which can be extended with more variables. The integrated remote sensing and geographic information system methodology demonstrated in this study can be applied in similar studies elsewhere.     

Missing basics: a study on sanitation and women’s health in urban slums in Lucknow,India

GeoJournal - Sanitation is a multidimensional concept alluding primarily to provision of services for safe disposal of human excreta, provision of clean potable water as well as maintenance of...     

Synthesis of biochar from sugarcane filter-cake and its impacts on physiological performance of lettuce (<Emphasis Type="Italic">Lettuce sativa</Emphasis>) grown on cadmium contaminated soil

Soil contamination with cadmium has become major concern all over the world because of its adverse impacts on ecosystem health and agricultural land. Soil amendment with biochar may have varied effects on physical and chemical properties of soil. The objective of the study was to explore the impact of sugarcane filter-cake biochar on physiological performance and growth of lettuce in an aged soil. Four different doses (0, 1.5%, 3%, and 5%) of biochar were used in the soil and conditioned for 1 month. After this, lettuce seedlings were grown in the soil. The results showed that the biochar treatment improved the fresh and dry biomass of leaves and roots as well as plant height while diminished the bioavailability of cadmium from the soil. As compared to control, biochar significantly enhanced the chlorophyll content in lettuce leaves. Due to the biochar amendment, the oxidative stress decreased in lettuce shoots over the control. As compared to control, concentration of cadmium in lettuce significantly decreased after the application of biochar. It was concluded that biochar could mitigate the toxicity of cadmium in lettuce by altering the biochemical and physiological processes in cadmium contaminated soil.     

Ghaleh-khargushi rhyodacite and Gorid andesite from Iran: characterization,uses, and durability

Durability of building stones is an important issue in sustainable development. Crystallization of soluble salts is recognized as one of the most destructive weathering agents of building stones. For this reason, durability of Ghaleh-khargushi rhyodacite and Gorid andesite from Iran was investigated against sodium sulfate crystallization aging test. Petrographic and physico-mechanical properties and pore size distribution of these stones were examined before and after the aging test. The characteristics of the microcracks were quantified with fluorescence-impregnated thin sections. Durability and physico-mechanical characteristics of Ghaleh-khargushi rhyodacite are mainly influenced by preferentially oriented preexisting microcracks. Stress induced by salt crystallization led to the widening of preexisting microcracks in Ghaleh-khargushi rhyodacite, as confirmed by the pore size distributions before and after the aging test. The preexisting microcracks of Gorid andesite were attributed to the mechanical stress induced by contraction of lava during cooling. The number of transcrystalline microcracks was significantly increased after the aging test. The degree of plagioclase microcracking was proportional to its size. Durability of the studied stones depends on initial physico-mechanical properties, pore size distribution, and orientation of microcracks. Initial effective porosity is found to be a good indicator of the stones’ durability. Salt crystallization resulted in an increase in the effective porosity with a parallel decrease in the wave velocities. Surface microroughness parameters increased with the development of salt crystallization-induced microcracking. Gorid andesite showed higher quality and durability than Ghaleh-khargushi rhyodacite.     

Subduction-related mafic to felsic magmatism in the Malayer–Boroujerd plutonic complex,western Iran

The Malayer–Boroujerd plutonic complex (MBPC) in western Iran, consists of a portion of a magmatic arc built by the northeast verging subduction of the Neo-Tethys plate beneath the Central Iranian Microcontinent (CIMC). Middle Jurassic-aged felsic magmatic activity in MBPC is manifested by I-type and S-type granites. The mafic rocks include gabbroic intrusions and dykes and intermediate rocks are dioritic dykes and minor intrusions, as well as mafic microgranular enclaves (MMEs). MBPC Jurassic-aged rocks exhibit arc-like geochemical signatures, as they are LILE- and LREE-enriched and HFSE- and HREE-depleted and display negative Nb–Ta anomalies. The gabbro dykes and intrusions originated from metasomatically enriched garnet-spinel lherzolite [Degree of melting (f_mel) ~ 15%] and exhibit negative Nd and positive to slightly negative ε_Hf(T) (+ 3.0 to ? 1.6). The data reveal that evolution of Middle Jurassic magmatism occurred in two stages: (1) deep mantle-crust interplay zone and (2) the shallow level upper crustal magma chamber. The geochemical and isotopic data, as well as trace element modeling, indicate the parent magma for the MBPC S-type granites are products of upper crustal greywacke (f_mel: 0.2), while I-type granites formed by partial melting of amphibolitic lower crust (f_mel: 0.25) and mixing with upper crustal greywacke melt in a shallow level magma chamber [Degree of mixing (f_mix): 0.3]. Mixing between andesitic melt leaving behind a refractory dense cumulates during partial crystallization of mantle-derived magma and lower crustal partial melt most likely produced MMEs (f_mix: 0.2). However, enriched and moderately variable ε_Nd(T) (? 3.21 to ? 4.33) and high (⁸⁷Sr/⁸⁶Sr)_i (0.7085–0.7092) in dioritic intrusions indicate that these magmas are likely experienced assimilation of upper crustal materials. The interpretations of magmatic activity in the MBPC is consistent with the role considered for mantle-derived magma as heat and mass supplier for initiation and evolution of magmatism in continental arc setting, elsewhere.     

Early Cretaceous sedimentary provenance and structural evolution of the central Sanandaj–Sirjan Zone,Iran: implications for palaeogeographic reconstructions of the northern Neo-Tethyan margin

ABSTRACT

The Early Cretaceous was an important epoch in the evolution of the Earth system in which major tectonic episodes occurred, especially along the Alpine–Himalayan belt. The paucity of reliable palaeogeographic data from the central segment of this geological puzzle, however, hampers the reconstruction of a panoramic view of its Early Cretaceous palaeogeography and geodynamic setting. Here we present multidisciplinary provenance data from Lower Cretaceous strata of the overriding plate of the Neo-Tethyan subduction zone (the Sanandaj–Sirjan Zone; SSZ, of central Iran), including structural, basin-fill evolution, petrographic and geochemical analyses. Sandstone provenance analysis of Lower Cretaceous red beds suggests the occurrence of sub-mature litho-quartzose sandstones attributed to an active continental arc margin in convergent setting predominantly derived from plutonic, quartzose sedimentary and metamorphic rocks exposed in the central SSZ. Weathering indices indicate moderate chemical weathering in the source area which may be related to close source-to-sink relationships or arid climate. Our palaeogeographic reconstructions and original geological mapping indicate that the erosion of uplifted basement rocks exposed in horst blocks provided the sediment sources for the syn-extensional deposition of uppermost Jurassic–lowermost Cretaceous conglomerates and Lower Cretaceous siliciclastic red beds within a continental retro-arc basin during initiation of the ‘Neo-Tethys 2?. The polyphase tectonic reactivation along the principal fault of the study area controlled the syn- and post-extensional tectonostratigraphic evolution that reflect the corresponding mechanical decoupling/coupling along the northern Neo-Tethyan plate margin.     

Predicting groundwater level of wells in the Diyala River Basin in eastern Iraq using artificial neural network

Al-Mansourieh zone is a part of Al-Khalis City within the province of Diyala and located in the Diyala River Basin in eastern Iraq with a total area about 830 km2.Groundwater is the main water source for agriculture in this zone.Random well drilling without geological and hydraulic information has led the most of these wells to dry up quickly.Therefore,it is necessary to estimate the levels of groundwater in wells through observed data.In this study,Alyuda NeroIntelligance 2.1 software was applied to predict the groundwater levels in 244 wells using sets of measured data.These data included the coordinates of wells(x,y),elevations,well depth,discharge and groundwater levels.Three ANN structures(5-3-3-1,5-10-10-1 and 5-11-11-1)were used to predict the groundwater levels and to acquire the best matching between the measured and ANN predicted values.The coefficient of correlation,coefficient determination(R2)and sum-square error(SSE)were used to evaluate the performance of the ANN models.According to the ANN results,the model with the three structures has a good predictability and proves more effective for determining groundwater level in wells.The best predictor was achieved in the structure 5-3-3-1,with R2 about 0.92,0.89,0.84 and 0.91 in training,validation,testing and all processes respectively.The minimum average error in the best predictor is achieved in validation and testing processes at about 0.130 and 0.171 respectively.On the other hand,the results indicated that the model has the potential to determine the appropriate places for drilling the wells to obtain the highest level of groundwater.     

Signature of the upper mantle density structure in the refined gravity data

The gravitational signal of the upper mantle density structures is investigated in the refined gravity data which are corrected for the gravitational contributions of the crust density structures and the Moho geometry. The gravimetric forward modeling is applied to compute these refined gravity data globally on a 1 × 1 arcdeg grid using the global geopotential model (EGM2008), the global topographic/bathymetric model (DTM2006.0) including the ice-thickness data, and the global crustal model (CRUST2.0). The characteristics of the upper mantle density structures are further analyzed in association with the Moho parameters (i.e., Moho depths and density contrast). The 1 × 1 arcdeg global data of the Moho parameters are estimated by applying the combined least-squares approach based on solving Moritz’s generalization of the Vening–Meinesz inverse problem of isostasy. The refined gravity data exhibit mainly the mantle lithosphere structures attributed to the global mantle convection. A significant correlation found over oceans between the refined gravity data and the Moho density contrast is explained by the increasing density of the oceanic lithosphere with age. Despite the lithosphere structures attributed to the global mantle convection are confirmed also in the refined gravity data over continents, the significant correlation between the refined gravity data and the Moho parameters is in this case absent. Instead, the significant proportion of lateral variations of the Moho density contrast within the continental lithosphere is attributed to the depth-dependant density changes due to pressure and thermal gradient.     

Application of artificial intelligence techniques for predicting the flyrock distance caused by blasting operation

Flyrock arising from blasting operations is one of the crucial and complex problems in mining industry and its prediction plays an important role in the minimization of related hazards. In past years, various empirical methods were developed for the prediction of flyrock distance using statistical analysis techniques, which have very low predictive capacity. Artificial intelligence (AI) techniques are now being used as alternate statistical techniques. In this paper, two predictive models were developed by using AI techniques to predict flyrock distance in Sungun copper mine of Iran. One of the models employed artificial neural network (ANN), and another, fuzzy logic. The results showed that both models were useful and efficient whereas the fuzzy model exhibited high performance than ANN model for predicting flyrock distance. The performance of the models showed that the AI is a good tool for minimizing the uncertainties in the blasting operations.     

Geochemical Characteristics,Origin, and Evolution of Ore‐Forming Fluids of the Khut Copper Skarn Deposit,West of Yazd in Central Iran

The Khut copper skarn deposit is located at about 50 km northwest of Taft City in Yazd province in the middle part of the Urumieh‐Dokhtar magmatic arc. Intrusion of granitoid of Oligocene–Miocene age into carbonate rocks of the Triassic Nayband Formation led to the formation of marble and a calcic skarn. The marble contains high grade Cu mineralization that occurs mainly as open space filling and replacement. Cu‐rich sulfide samples from the mineralized marble are also anomalous in Au, Zn, and Pb. In contrast, the calcic skarn is only weakly anomalous in Cu and W. The calcic skarn is divided into garnet skarn and garnet–pyroxene skarn zones. Paragenetic relationships and microthermometric data from fluid inclusions in garnet and calcite indicate that the compositional evolution of skarn minerals occurred in three main stages as follows. (i) The early prograde stage, which is characterized by Mg‐rich hedenbergite (Hd_53.7Di_42.3–Hd_86.1Di_9.5) with Al‐bearing andradite (69.8–99.5 mol% andradite). The temperature in the early prograde skarn varies from 400 to 500°C at 500 bar. (ii) The late prograde stage is manifested by almost pure andradite (96.2–98.4 mol% andradite). Based on the fluid inclusion data from garnet, fluid temperature and salinity in this stage is estimated to vary from 267 to 361°C and from 10.1 to 21.1 wt% NaCl equivalent, respectively. Pyrrhotite precipitation started during this stage. (iii) The retrograde stage occurs in an exoskarn, which consists of an assemblage of ferro‐actinolite, quartz, calcite, epidote, chlorite, sphalerite, pyrite, and chalcopyrite that partially replaces earlier mineral assemblages under hydrostatic conditions during fracturing of the early skarn. Fluids in calcite yielded lower temperatures (T < 260°C) and fluid salinity declined to ～8 wt% NaCl equivalent. The last stage mineralization in the deposit is supergene weathering/alteration represented by the formation of iron hydroxide, Cu‐carbonate, clay minerals, and calcite. Sulfur isotope data of chalcopyrite (δ³⁴S of +1.4 to +5.2‰) show an igneous sulfur source. Mineralogy and mineral compositions of the prograde assemblage of the Khut skarn are consistent with deposition under intermediately oxidized and slightly lower fS₂ conditions at shallow crustal levels compared with those of other typical Fe‐bearing Cu–Au skarn systems.