The behavior of arsenic and antimony at Pezinok mining site,southwestern part of the Slovak Republic

Arsenic and antimony contamination is found at the Pezinok mining site in the southwest of the Slovak Republic. Investigation of this site included sampling and analysis of water, mineralogical analyses, sequential extraction, in addition to flow and geochemical modeling. The highest dissolved arsenic concentrations correspond to mine tailings (up to 90,000 μg/L) and the arsenic is present predominately as As(V). The primary source of the arsenic is the dissolution of arsenopyrite. Concentration of antimony reaches 7,500 μg/L and its primary source is the dissolution of stibnite. Pore water in mine tailings is well-buffered by the dissolution of carbonates (pH values between 6.6 and 7.0) and arsenopyrite grains are surrounded by reaction rims composed of ferric iron minerals. Based on sequential extraction results, most solid phase arsenic is in the reducible fraction (i.e. ferric oxyhydroxides), sulfidic fraction, and residual fraction. Distribution of antimony in the solid phase is similar, but contents are lower. The principal attenuation mechanism for As(V) is adsorption to ferric oxide and hydroxides, but the adsorption seems to be limited by the competition with Sb(V) produced by the oxidation of stibnite for adsorption sites. Water in mine tailings is at equilibrium with gypsum and calcite, but far from equilibrium with any arsenic and antimony minerals. The concentrations of arsenic and antimony in the surrounding aquifer are much lower, with maximum values of 215 and 426 μg/L, respectively. Arsenic and antimony are transported by ground water flow towards the Blatina Creek, but their loading from ground water to the creek is much lower compared with the input from the mine adits. In the Blatina Creek, arsenic and antimony are attenuated by dilution and by adsorption on ferric iron minerals in stream sediments with resulting respective concentrations of 93 and 45 μg/L at the site boundary south of mine tailing ponds.     

Reconstructing seawater δO from paired coral δO and Sr/Ca ratios: Methods, error analysis and problems, with examples from Tahiti (French Polynesia) and Timor (Indonesia)

We compare several statistical routines that may be used to calculate δ¹⁸O_sw and SSS from paired coral Sr/Ca and δ¹⁸O measurements. Typically, the δ¹⁸O_coral-SST relationship is estimated by linear regression of coral δ¹⁸O vs. SST. If this method is applied, evidence should be given that at a particular site SST and SSS do not co-vary. In the tropical oceans, SST and δ¹⁸O_sw (SSS) often co-vary, and this will bias the estimate of the regression slope of δ¹⁸O_coral-SST. Using a stochastic model, we show that covariance leads to a bias in the coefficients of the univariate regression equations. As the slope of the δ¹⁸O_coral-SST relationship has known, we propose to insert this value for γ₁ in the regression models. This requires that the constants of the regression equations are removed. To omit the constants, we propose to center the regression equations (i.e., to remove the mean values from the variables). The statistical error propagation is calculated to assess our ability to resolve past variations in δ¹⁸O_sw (SSS). At Tahiti, we find that the combined analytical uncertainties of coral δ¹⁸O and Sr/Ca equal the amplitude of the seasonal cycle of δ¹⁸O_sw (SSS). Therefore, we cannot resolve the seasonal cycle of SSS at Tahiti. At Timor, the error of reconstructed δ¹⁸O_sw (SSS) is lower than the magnitude of seasonal variations of δ¹⁸O_sw (SSS), and the seasonal cycle of δ¹⁸O_sw (SSS) can be resolved.     

Early and Middle Pleistocene Faunal and hominins dispersals through Southwestern Asia

This review summarizes the paleoecology of the Early and Middle Pleistocene of southwestern Asia, based on both flora and fauna, retrieved from a series of ‘windows’ provided by the excavated sites. The incomplete chrono-stratigraphy of this vast region does not allow to accept the direct chronological correlation between the available sites and events of faunal and hominin dispersals from Africa. It also demonstrates that hominins survived in a mixed landscape of open parkland with forested surrounding hills. In addition, the prevailing environmental conditions are not sufficient to explain successful adaptations to new ecological niches away from the African savanna of the bearers of ‘core and flake’ and the Acheulian industries, The differences in knapping and secondary shaping of stone artifacts probably reflect the learned traditions of different groups of hominins. The current distribution of lithic industries across Eurasia is undoubtedly incomplete due to lack of cultural continuities as well as paucity of field research in several sub-regions. This observation supports the contention that what we view as a constant stream of migrants was actually interrupted many times. The continuous occupation of southwestern Asia by the makers of the Acheulian is in contrast with neighboring regions such as the Iranian plateau and Eastern Europe. A more complex model is required to explain the recorded Eurasian archaeological–cultural mosaic.     

三个印度洋区域天然气水合物的产状和地下水文学对比研究

2006年度印度洋天然气水合物规划（NG—HP）的目标是调查控制印度近海天然气水合物分布及其特征的地质因素,以便最终评价作为潜在能源的天然气水合物的开采可能性。海洋中聚集的天然气水合物的总量是巨大的,大约25000～10000亿t。     

Key structural parameters affecting earthquake ground motion in 2D and 3D sedimentary structures

Alluvial valleys generate strong effects on earthquake ground motion (EGM). These effects are rarely accounted for even in site-specific studies because of (a) the cost of the required geophysical surveys to constrain the site model, (b) lack of data for empirical prediction, and (c) poor knowledge of the key controlling parameters. We performed 3D, 2D and 1D simulations for six typical sedimentary valleys of various width and depth, and for a variety of modifications of these 6 “nominal models” to investigate sensitivity of EGM characteristics to impedance contrast, attenuation, velocity gradient and geometry. We calculated amplification factors, and 2D/1D and 3D/2D aggravation factors for 10 EGM characteristics, using a representative set of recorded accelerograms to account for input motion variability. The largest values of the amplification and aggravation factors are found for the Arias intensity and cumulative absolute velocity, the lowest for the root-mean-square acceleration. The aggravation factors are largest for the vertical component. For each model, at least one EGM characteristic exhibits a significant 2D/1D aggravation factor, while all EGM characteristics exhibit significant 2D/1D aggravation factor on the vertical component. For all investigated sites, there is always an area in the valley for which 1D estimates are not sufficient. 2D estimates are insufficient at several sites. The key structural parameters are the shape ratio and overall geometry of the sediment-bedrock interface, impedance contrast at the sediment-bedrock interface, and attenuation in sediments. The amplification factors may largely exceed the values that are usually considered in GMPEs between soft soils and rock sites.     

Groundwater flow in the transition zone between freshwater and saltwater: a field-based study and analysis of measurement errors

The quantification of groundwater flow near the freshwater–saltwater transition zone at the coast is difficult because of variable-density effects and tidal dynamics. Head measurements were collected along a transect perpendicular to the shoreline at a site south of the city of Adelaide, South Australia, to determine the transient flow pattern. This paper presents a detailed overview of the measurement procedure, data post-processing methods and uncertainty analysis in order to assess how measurement errors affect the accuracy of the inferred flow patterns. A particular difficulty encountered was that some of the piezometers were leaky, which necessitated regular measurements of the electrical conductivity and temperature of the water inside the wells to correct for density effects. Other difficulties included failure of pressure transducers, data logger clock drift and operator error. The data obtained were sufficiently accurate to show that there is net seaward horizontal flow of freshwater in the top part of the aquifer, and a net landward flow of saltwater in the lower part. The vertical flow direction alternated with the tide, but due to the large uncertainty of the head gradients and density terms, no net flow could be established with any degree of confidence. While the measurement problems were amplified under the prevailing conditions at the site, similar errors can lead to large uncertainties everywhere. The methodology outlined acknowledges the inherent uncertainty involved in measuring groundwater flow. It can also assist to establish the accuracy requirements of the experimental setup.     

A model for the bite mechanics in the herbivorous dinosaur Stegosaurus (Ornithischia, Stegosauridae)

Although the herbivorous dinosaur Stegosaurus (Ornithischia, Stegosauridae) is a well-described Late Jurassic taxon, little is known about the feeding habits and biomechanics of its homodont dentition. The presence of a rhamphotheca has been suggested, but it is still unknown how much such structure would have participated in the foraging behaviour of Stegosaurus. To better understand the feeding mechanism of this taxon, three-dimensional models of a Stegosaurus tooth were created, using the software ZBrush^®. One model was simple and lacked serrations, whereas the other model included serrations. Those models were then transferred to the software Strand7^®, where finite element analyses took place. The models were given material properties of enamel, based on studies done with crocodilian and mammalian teeth. In addition to that, bite forces were calculated for Stegosaurus, based on skull proportions. The results show little difference between the force distributions on the serrated and non-serrated models, indicating an efficient mechanism of stress dissipation that avoids high stresses being transferred to the jaw bones during biting. Digital plant models were also created to test the calculated bite forces in Stegosaurus, which suggests this animal was capable of biting through smaller branches. Computer modelling and analyses provide additional information about feeding habits and plant preferences for Stegosaurus, and can be adapted for studying other comparable herbivorous taxa.     

Recent observations of the WR central star of the planetary nebula LMC-N66

The recent evolution of the central star of the planetary nebula LMC-N66 is presented. Before 1987, it showed a weak continuum with aT _eff120 000 K andL _bol25 000L and in a few years it developed strong WR features (P Cygni line profiles in N v at 124.0 nm and C IV at 155.0 nm, wide Heii emission, etc.) typical of a WN 4.5. Additionally the stellar continuum increased by a large factor and the absolute visual magnitude of the star changed from + 1.24 in 1987 to–2.57 in January, 1995. The WR features and enhanced continuum, evidencing a powerful mass-loss event remained with small variations for more than 5 years. Recent ultraviolet and optical data shows that the mass-loss seems to have diminished abruptly in the last three months.     

HHSMT observations of the Venusian mesospheric temperature, winds, and CO abundance around the MESSENGER flyby

We present submillimeter observations of ¹²CO J=3-2 and 2-1, and ¹³CO J=2-1 lines of the Venusian mesosphere and lower thermosphere with the Heinrich Hertz Submillimeter Telescope (HHSMT) taken around the second MESSENGER flyby of Venus on 5 June 2007. The observations cover a range of Venus solar elongations with different fractional disk illuminations. Preliminary results like temperature and CO abundance profiles are presented.These data are part of a coordinated observational campaign in support of the ESA Venus Express mission. Furthermore, this study attempts to contribute to cross-calibrate space- and ground-based observations, to constrain radiative transfer and retrieval algorithms for planetary atmospheres, and to a more thorough understanding of the global patters of circulation of the Venusian atmosphere.     

Landscape and climatic changes during the end of the Late Prehistory in the Amblés Valley (Ávila, central Spain), from 1200 to 400 cal BC

Correlations between ecological and cultural changes occurred during a short period between the end of Subboreal and the beginning of Subatlantic in the Amblés Valley (Ávila, central Spain) are analyzed, taking into account palaeopalynological and archaeological data. Plant dynamics from pollen analyses, both from archaeological sites and peat bogs, have been interpreted in relation to human settlements and the transformation of economic practices. These provided a comprehensive hypothesis on human/climate interactions at the beginning of the 1st millennium cal BC. There was an ecological crisis in the region that lasted for a century (ca. 850–760 cal BC). This was especially sharp due to both the geographical constraints of the area and its previous agrarian history. This event implied a sudden and abrupt climatic change from xeric and warm conditions (Subboreal) to more humid and cooler ones (Subatlantic). Environmental stress derived from climatic crisis could be an important factor in the explanation of the historical process, whose main consequences were both the origin of the Iron Age peasant villages and the end of the ‘dehesa’ type landscape.