Effects of a plastic deformation on the remanent magnetization of a Cu-Co alloy

Compressional plastic deformation of a Cu-Co alloy in which Co particles (submicron to a few tens of microns in diameter) were precipitated in a Cu matrix resulted in a systematic rotation of remanent magnetization (IRM atH = 1000Oe) away from the axis of compression with increasing degree of the deformation.     

241Pu and241Am in sediments from coastal basins off California and Mexico

In sediments deposited in the coastal basins off the western North American continent since the early 1960's, there is more²⁴¹Am activity than one would predict if its presence was solely due to the decay of²⁴¹Pu that was produced during the testing of weapons in 1961–1962 (taken as July 1, 1962 for calculations). This excess can be accounted for by the decay of²⁴¹Pu, if pre-1962 fallout (fallout from the pre-moratorium testing) has been continuously introduced into the recent sediments along with fallout from post-moratorium testing. This hypothesis is supported by the plutonium depth profiles which do not reflect direct fallout from the atmosphere, as characterized by two peaks corresponding to the two major weapons testing periods, but continuously increasing plutonium and americium concentrations from 1954 to 1974. Thus, the nuclides may be coming from a large reservoir that has accumulated and mixed fallout since 1952. Such a concentration gradient for all of the nuclides requires their immobilization in the sediment after deposition.     

Long-range weather forecasting

This article describes long-range forecasting, examples in Japan being mainly quoted. The article stresses the approach with which the author is most familiar, namely that used in the Japan Meteorological Agency; it employs statistical, synoptic, and physical techniques which contain implicitly many of the considerations used in long-range forecasting in many countries. After World War II, with an increase in quantity of upper-air data over the Northern Hemisphere, many studies of long-range forecasting were made in relation to the general circulation of the atmosphere. For the past several years the studies of long-range forecasting in Japan have been especially concentrated on the development of the techniques of seasonal weather forecasting. The relevant approaches to long-range forecasting are now being developed from synoptic and dynamical viewpoints in many countries, by the use of data in both the troposphere and the stratosphere over the globe and electronic computers.     

Marine geochronology withPb

The application of²¹⁰Pb dating to an inshore marine deposit off the California coast has been successful. The amounts of unsupported²¹⁰Pb annually accumulated in the Santa Barbara sediments are much greater than those from lake and glacial deposits and than the amount produced through the decay of radium in the overlying water column.     

Dependence of the effective attachment coefficient of small ions upon the size of condensation nuclei

Summary To clarify the ionization equilibrium near the ground, simultaneous measurements of the rate of ion pair production (q), the concentrations of small ions (n) and condensation nuclei (Z), and the diffusion coefficient of condensation nuclei (D) were carried out at several stations in the central area of Japan. The total rate of ion pair production (q) was estimated fromq=q(Rn)+q(Tn)+q()+q(+CR). The value ofq was estimated as 10J to 20J. The mean life () and the effective attachment coefficient () of small ions were also estimated at each station. Correlations amongn, Z, q, andD were also studied. If we take the variation ofD into consideration, the correlation was expressed by the simple formula;q=n Z. The dependence of upon size of nuclei (2r) were also measured, and was found to correlate well withD orr.     

Study of the effect of water-soluble fractions of heavy-oil on coastal marine organisms using enclosed ecosystems,mesocosms

Mesocosm facilities composed of 4 experimental and 2 reservoir tanks (1.5 m in diameter, 3.0 m in depth and 5 tons in capacity) made of FRP plastics, were constructed in the concrete fish rearing pond in the Fisheries Laboratory, The University of Tokyo. The water-soluble fraction of Rank A heavy residual oil was formed by mixing 500 g of the oil with 10 l of seawater, which was introduced to the 5000 l-capacity tanks. Experimental Run 4 was conducted from May 31 to June 7, 2000. Oil concentrations in the tanks were 4.5 microg/l called LOW, and 13.5 microg/l, called HIGH tank. Bacterial growth rates very quickly accelerated in the HIGH tank just after the loading of oil which corresponded with a high increase of bacterial cells in the same tank after 2 days. Later, bacterial numbers in HIGH tank rapidly decreased, corresponding with the rapid increase of heterotrophic nano-flagellates and virus numbers on the same day. Sediment traps were deployed at the bottom of the experimental tanks, and were periodically retrieved. These samples were observed both under light microscope and epi-fluorescent microscope with UV-excitation. It was observed that the main components of the vertical flux were amorphous suspended matter, mostly originating from dead phytoplankton and living diatoms. It was further observed from the pictures that vertical transport of oil emulsions were probably conducted after adsorption to amorphous suspended matter and living diatoms, and were settling in the sediment traps at the bottom of the tanks. This means that the main force which drives the soluble fraction of oil into bottom sediment would be vertical flux of such amorphous suspended particles and phytoplankton. Further incubation of the samples revealed that the oil emulsions were degraded by the activity of autochtonous bacteria in the sediment in aerobic condition.     

Geology of the summit limestone of Mount Qomolangma (Everest) and cooling history of the Yellow Band under the Qomolangma detachment

Abstract   Newly discovered peloidal limestone from the summit of Mount Qomolangma (Mount Everest) contains skeletal fragments of trilobites, ostracods and crinoids. They are small pebble-sized debris interbedded in micritic bedded limestone of the Qomolangma Formation, and are interpreted to have been derived from a bank margin and redeposited in peri-platform environments. An exposure of the Qomolangma detachment at the base of the first step (8520 m), on the northern slope of Mount Qomolangma was also found. Non-metamorphosed, strongly fractured Ordovician limestone is separated from underlying metamorphosed Yellow Band by a sharp fault with a breccia zone. The ⁴⁰Ar–³⁹Ar ages of muscovite from the Yellow Band show two-phase metamorphic events of approximately 33.3 and 24.5 Ma. The older age represents the peak of a Barrovian-type Eo-Himalayan metamorphic event and the younger age records a decompressional high-temperature Neo-Himalayan metamorphic event. A muscovite whole-rock ⁸⁷Rb–⁸⁶Sr isochron of the Yellow Band yielded 40.06 ± 0.81 Ma, which suggests a Pre-Himalayan metamorphism, probably caused by tectonic stacking of the Tibetan Tethys sediments in the leading margin of the Indian subcontinent. Zircon and apatite grains, separated from the Yellow Band, gave pooled fission-track ages of 14.4 ± 0.9 and 14.4 ± 1.4 Ma, respectively. These new chronologic data indicate rapid cooling of the hanging wall of the Qomolangma detachment from approximately 350°C to 130°C during a short period (15.5–14.4 Ma).     

Shaking table tests on seismic response of steel braced frames with column uplift

Previous studies have suggested that rocking vibration accompanied by uplift motion might reduce the seismic damage to buildings subjected to severe earthquake motions. This paper reports on the use of shaking table tests and numerical analyses to evaluate and compare the seismic response of base‐plate‐yielding rocking systems with columns allowed to uplift with that of fixed‐base systems. The study is performed using half‐scale three‐storey, 1 × 2 bay braced steel frames with a total height of 5.3 m. Base plates that yield due to column tension were installed at the base of each column. Two types of base plates with different thicknesses are investigated. The earthquake ground motion used for the tests and analyses is the record of the 1940 El Centro NS component with the time scale shortened by a factor of 1/√2. The maximum input acceleration is scaled to examine the structural response at various earthquake intensities. The column base shears in the rocking frames with column uplift are reduced by up to 52% as compared to the fixed‐base frames. Conversely, the maximum roof displacements of the fixed and rocking frames are about the same. It is also noted that the effect of the vertical impact on the column associated with touchdown of the base plate is small because the difference in tensile and compressive forces is primarily due to the self‐limiting tensile force in the column caused by yielding of the base plate. Copyright © 2006 John Wiley & Sons, Ltd.     

Timescales and mechanisms of fluid infiltration in a marble: an ion microprobe study

Using a recently developed ion microprobe technique, a detailed oxygen isotope map of calcite grains in a coarse-grained marble has been constructed, supported by trace element (Mn, Sr, Fe) analysis and cathodoluminescence (CL) imaging, in order to constrain scales of oxygen isotope equilibrium, timescales and mechanisms of metamorphic fluid infiltration, and fluid sources and pathways. Results are compared with a previous study of this sample (Wada 1988) carried out using a cryo-microtome technique and conventional oxygen isotope analysis. The marble, from the high temperature/low pressure Hida metamorphic belt in north-central Japan, underwent granulite facies followed by amphibolite facies metamorphic events, the latter associated with regional granite intrusion. The CL imaging indicates two types of calcite, a yellow luminescing (YLC) and a purple luminescing (PLC) variety. The YLC, which occupies grain boundaries, fractures, replacement patches, and most of the abundant deformation twin lamellae, post-dates the dominant PLC calcite and maps out fluid pathways. Systematic relationships were established between oxygen isotope and trace element composition, calcite type and texture, based on 74 ¹⁸O/¹⁶O and 17 trace element analyses with 20–30 μ m spatial resolution. The YLC is enriched in Mn and Fe, and depleted in ¹⁸O and Sr compared to PLC, and is much more ¹⁸O depleted than is indicated from conventional analyses. Results are interpreted to indicate infiltration of ¹⁸O-depleted (metamorphic or magmatic) fluid (initial δ¹⁸O = 9‰–10.5‰) along grain boundaries, fractures and deformation twin lamellae, depleting calcite grains in Sr and enriching them in Mn and Fe. The sample is characterised by gross isotopic and elemental disequilibrium, with important implications for the application of chromatographic theory to constrain fluid fluxes in metacarbonate rocks. Areas of PLC unaffected by “short-circuiting” fluid pathways contain oxygen diffusion profiles of ∼10‰/∼200 μm in grain boundary regions or adjacent to fractures/patches. When correction is made for estimated grain boundary/fracture and profile orientation in 3D, profiles are indistinguishable within error. Modelling of these profiles gives consistent estimates of Dt (where D is the diffusion coefficient and t is time) of ∼0.8 × 10⁻⁸ m², from which, using experimental data for oxygen diffusion in calcite, timescales of fluid transport along grain boundaries at amphibolite facies temperatures of ∼10³ to ∼10⁴ years are obtained. These short timescales, which are much shorter than plausible durations of metamorphism, imply that rock permeabilities may be transiently much higher during fluid flow than those calculated from time integrated fluid fluxes or predicted from laboratory measurements. The preservation of ¹⁸O/¹⁶O profiles requires either rapid cooling rates (∼100–600 °C/million years), or, more plausibly, loss of grain boundary fluid such that a dry cooling history followed the transient passage of fluid. The δ¹⁸O/trace element correlations are also consistent with volume diffusion-controlled transport in the PLC. Fluid transport and element exchange occurred by two inter-related mechanisms on short timescales and on different lengthscales – long-distance flow along cracks, grain boundaries and twin lamellae coupled to ∼200 μm-scale volume diffusion of oxygen. Received: 8 December 1997 / Accepted: 18 May 1998