京津冀地区地下流体数字化观测数据完整率及其地震前兆监测有效性的调查与分析

在北京、天津、河北二市一省部分地区抽样调查了13口井水位、11口井水温、5口井气氡、2口井气汞、2口井氦气数字化观测现状,统计分析了其数据完整率及观测断记次数与数据缺失量;在调查观测数据断记及其原因的基础上,进一步统计分析了数据缺失的主要原因,分析了连续完整的数据系列在地震前兆监测中的有效性。研究结果表明,除了氦气之外,水位、水温、气氡与气汞4大主要测项的运行,总体上是正常的;但多数井多数测项存在断记与数据缺失的问题,其主要原因是仪器故障与运行不正常,其次是停电、通信线路故障与雷击,此外还存在原因不明的断记与缺数的问题;以井统计,约有1/2的水位与水温观测井可在地震中期与短临前兆中发挥作用,而气氡、气汞等化学量观测只在地震短临前兆监测中,约有一半的井有可能发挥一定效能。     

Seismic identification of channel sandbodies in the Fuyang oil layer in North Songliao Basin, China

The Fuyang oil-layer in North Songliao Basin is characterized by thin interbedded sands and shales, strong lateral variation, strong reservoir heterogeniety, and so on. The thickness of individual sand layers is generally 3 - 5 m. Identifying the channel sand-bodies of the Fuyang oil layer using seismic techniques is very difficult due to the low seismic resolution. Taking the GTZ area as an example, we discuss the genetic characteristics of the channel sand-bodies and point out the real difficulty in using seismic techniques to predict the channel sand-bodies. Two methods for the identification of channels are presented： frequency spectrum imaging and pre-stack azimuthal anisotropy. Identifying the channel sand-bodies in Fuyu oil-layer using the two seismic methods results in a success rate up to 80% compared with well data.     

Collision leading to multiple-stage large-scale extrusion in the Qinling orogen: Insights from the Mianlue suture

The geologic framework of the Phanerozoic Qinling–Dabie orogen was built up through two major suturing events of three blocks. From north to south these include the North China craton (including the north Qinling block), the Qinling–Dabie microblock, and the South China craton (including the Bikou block), separated by the Shangdan and Mianlue sutures. The Mianlue suture zone contains evidence for Mesozoic extrusion tectonics in the form of major strike–slip border faults surrounding basement blocks, a Late Paleozoic ophiolite and a ca. 240–200 Ma thrust belt that reformed by 200–150 Ma thrusts during A-type (intracontinental) subduction. The regional map pattern shows that the blocks are surrounded by complexly deformed Devonian to Early Triassic metasandstones and metapelites, forming a regional-scale block-in-matrix mélange fabric. Five distinct tectonic units have been recognized in the belt: (1) basement blocks including two types of Precambrian basement, crystalline and transitional; (2) continental margin slices including Early Paleozoic strata, and Late Paleozoic fluviodeltaic sedimentary rocks, proximal and distal fan clastics, reflecting the development of a north-facing rift margin on the edge of the South China plate; (3) out of sequence oceanic crustal slices including strongly deformed postrift, deep-water sedimentary rocks, sheeted dikes, basalts, and mafic–ultramafic cumulates of a Late Paleozoic ophiolite suite, developing independent of the rift margin in a separate basin; (4) out-of-sequence island-arc slices; (5) accretionary wedge slices. All the tectonic units were deformed during three geometrically distinct deformation episodes (D₁, D₂ and D₃ during 240–200 Ma). Units 2–4 involved southward thrusting and vertical then southward extrusion of about 20 km of horizontal displacement above the autochthonous basement during the D₁ episode. Thrust slices 20 km south of the Mianlue suture are related to this vertical extrusion due to the same rock assemblages, ages and kinematics. The D₂ and D₃ episodes folded all the units in a thick-skinned style about east–west (D₂) and west–northwest (D₃) axes in the Mianlue suture zone. An early foreland propagating sequence of accretion of Late Paleozoic rocks deposited above the Yangtze craton is not involved in D₁ deformation but is temporally equivalent to the D₂ and D₃ deformation in the Mianlue suture. Two stages of strike–slip faulting mainly occurred at the end of D₂ and D₃, respectively. During D₂ deformation, the Bikou block was obliquely indented to the ESE into the Mianlue suture, rather than being thrust over the Mianlue suture from the north as a part of the Qinling–Dabie microblock. During D₃ deformation, however, the Bikou block was bounded by the south boundary fault of the Mianlue suture, and the Yangpingguan fault on the south. These faults are coeval strike–slip faults, but of opposite senses, and accommodated minor southwestward extrusion of the Bikou block into Songpan–Ganze orogen. The other basement blocks north of the Mianlue suture were extruded eastward by about 20 km of lateral displacement, based on the offset of the Wudang dome, during the D₃ episode due to the northeastward indentation of the Hannan complex of the South China craton. Post-D₃ emplacement of granite, cutting across the strike–slip faults such as the Mianlue suture, provides a minimum age of 200 Ma for D₃ deformation. Therefore, based on insights from the evolution of the Mianlue suture, the D₂ and D₃ episodes in the Mianlue suture and its neighbors are not responsible for and associated with the two-stage extrusion of the Dabie UHP-HP terranes from the Foping dome to the present erosional surface (more than 350 km).     

山西西山煤田7号煤层成因类型研究

煤的成因类型通过煤的有机显微组成、矿物成分等来体现。从微观研究的角度出发，以各子样的显微煤岩组分统计值、镜惰比（V/I）、骨基比（F／M）、矿物质含量为依据，对西山煤田屯兰煤矿7号煤进行成因类型划分，分为4类6型，即Ⅰ-①、Ⅲ-①、Ⅲ-②、Ⅳ-①、Ⅳ-②、Ⅴ-①。自下而上对煤层划分了23个成因分层。7煤层以Ⅳ类成因类型为主，沉积了覆水森林沼泽环境。     

Geology and Metallogenesis of the Sawayaerdun Gold Deposit in the Southwestern Tianshan Mountains, Xinjiang, China

The Sawayaerdun gold deposit, located in Wuqia County, Southwest Tianshan, China, occurs in Upper Silurian and Lower Devonian low‐grade metamorphic carbonaceous turbidites. The orebodies are controlled by a series of NE‐NNE‐trending, brittle–ductile shear zones. Twenty‐four gold mineralized zones have been recognized in the Sawayaerdun ore deposit. Among these, the up to 4‐km‐long and 200‐m wide No. IV mineralized zone is economically the most important. The average gold grade is 1–6 g/t. Gold reserves of the Sawayaerdun deposit have been identified at approximately 37 tonnes and an inferred resource of 123 tonnes. Hydrothermal alteration is characterized by silicification, pyritization, arsenopyritization, sericitization, carbonatization and chloritization. On the basis of field evidence and petrographic analysis, five stages of vein emplacement and hydrothermal mineralization can be distinguished: stage 1, early quartz stage, characterized by the occurrence of quartz veins; stage 2, arsenopyrite–pyrite–quartz stage, characterized by the formation of auriferous quartz veinlets and stockworks; stage 3, polymetallic sulfide quartz stage, characterized by the presence of auriferous polymetallic sulfide quartz veinlets and stockworks; stage 4, antimony–quartz stage, characterized by the formation of stibnite–jamesonite quartz veins; and stage 5, quartz–carbonate vein stage. Stages 2 and 3 represent the main gold mineralization, with stage 4 representing a major antimony mineralization episode in the Sawayaerdun deposit. Two types of fluid inclusion, namely H₂O–NaCl and H₂O–CO₂–NaCl types, have been recognized in quartz and calcite. Aqueous inclusions show a wide range of homogenization temperatures from 125 to 340°C, and can be correlated with the mineralization stage during which the inclusions formed. Similarly, salinities and densities of these fluids range for each stage of mineralization from 2.57 to 22 equivalent wt% NaCl and 0.76 to 1.05 g/cm³, respectively. The ore‐forming fluids thus are representative of a medium‐ to low‐temperature, low‐ to medium‐salinity H₂O–NaCl–CO₂–CH₄–N₂ system. The δ³⁴S_CDT values of sulfides associated with mineralization fall into a narrow range of ?3.0 to +2.6‰ with a mean of +0.1‰. The δ¹³C_PDB values of dolomite and siderite from the Sawayaerdun gold deposit range from ?5.4 to ?0.6‰, possibly reflecting derivation of the carbonate carbon from a mixed magmatic/sedimentary source. Changes in physico‐chemical conditions and composition of the hydrothermal fluids, water–rock exchange and immiscibility of hydrothermal fluids are inferred to have played important roles in the ore‐forming process of the Sawayaerdun gold–antimony deposit.     

人工触发闪电电流及磁场变化特征对比

对2006年山东人工触发闪电实验中获取的一次传统触发闪电的电流及60 m处的磁感应强度变化波形对比分析的结果表明,Rogowski线圈和磁场测量系统记录到的波形很类似.这次闪电共包含两次回击,回击的时间间隔约为34 ms.两次回击的电流幅值很大,分别为41.6 kA和29.6 kA,在60 m处产生的磁感应强度变化分别为133μT和97μT,通过磁感应强度反演得到两次回击的电流分别为39.8 kA和29.1 kA,与Rogowski线圈的实测结果基本一致.另外,回击之前放电过程中仅出现了两个脉冲,利用所测磁感应强度反演得到两个脉冲对应的电流分别为2.11 kA和2.7 kA,与Rogowski线圈的实测结果2.1 kA和2.8 kA基本一致.     

两种干旱指标在乌海地区干旱分析中的应用比较研究

本文对降水量距平百分率、M 指数两种干旱指标进行了分析、比较,发现降水量距平百分率是适合乌海地区的干旱指标,并以此为乌海地区的干旱指标,根据乌海实际干旱情况,将干旱等级标准按不同时间尺度进行了调整,根据调整后的等级标准,对乌海地区的干旱情况进行了分析.     

一次副热带高压边缘的局地冰雹多普勒雷达回波特征分析

2007年7月26日傍晚在浙江省中部发生大冰雹天气,经分析认为,这是发生在副热带高压边缘的局地冰雹过程,移动不明显,影响范围小,但强度特强.降雹前回波 VIL 值突升,降雹时反而下降;有气旋式辐合流场;雹暴云中部近气旋流场且辐合中心向右前方倾斜,回波强度越强时,其倾斜度越大;下击暴流征状的出现时间较晚,持续时间较短.     

南半球冷空气爆发对华南连续性暴雨影响的个例分析

2005年6月17—24日，华南地区发生了连续多日的暴雨天气过程，给该地区带来了严重的洪涝灾害，在此期间南半球有较强的冷空气活动。为了弄清南半球冷空气对这次连续多日暴雨过程的影响及其物理途径，利用NCEP每6小时1°×1°经纬度的再分析资料、逐小时的TBB以及华南地区地面降水等资料，以这次连续性暴雨天气过程为例，初步分析了南半球冷空气爆发在华南地区暴雨形成中的作用。结果发现：在500hPa西风带低压槽的诱导下，马斯克林高压向东移动并登陆澳大利亚，促使南半球冷空气爆发，加大了40～60°E、60～70°E和85～95°E等通道的越赤道气流，它们转向后汇向华南地区，增强了华南南部和南海北部地区的低空急流和暴雨区的水汽输送，这是华南地区连续多日暴雨的主要原因之一。     

基于中值滤波和小波变换的天气雷达回波图像处理

本文提出了一种中值滤波和小波变换相结合的天气雷达回波图像处理方法,分别从目标回波的视觉角度和统计量的客观角度对处理后图像进行了分析。实验结果表明,本文算法实现了去除回波图像中高斯和脉冲混合噪声的目的,有效的保留了回波图像边缘细节,视觉效果好,层次感较为丰富,处理效果明显优于传统图像处理方法,为自动识别回波种类的研究提供了良好的基础。