Internal generation of waves: Delta source function method and source term addition method

In this study, we investigate two internal wave generation methods in numerical modeling of time-dependent equations for water wave propagation, i.e., delta source function method and source term addition method, the latter of which has been called the line source method in literatures. We derive delta source functions for the Boussinesq-type equations and extended mild-slope equations. By applying the fractional step splitting method, we show that the delta source function method is equivalent to the source term addition method employing the energy velocity. This suggests that the energy velocity should be used rather than the phase velocity for the transport of incident wave energy in the source term addition method. Finally, the performance of the delta source function method is verified by accurately generating nonlinear cnoidal waves as well as linear waves for horizontally one-dimensional cases.     

Generation of random waves in time-dependent extended mild-slope equations using a source function method

We develop techniques of numerical wave generation in the time-dependent extended mild-slope equations of Suh et al. [1997. Time-dependent equations for wave propagation on rapidly varying topography. Coastal Engineering 32, 91–117] and Lee et al. [2003. Extended mild-slope equation for random waves. Coastal Engineering 48, 277–287] for random waves using a source function method. Numerical results for both regular and irregular waves in one and two horizontal dimensions show that the wave heights and the frequency spectra are properly reproduced. The waves that pass through the wave generation region do not cause any numerical disturbances, showing usefulness of the source function method in avoiding re-reflection problems at the offshore boundary.     

Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels

This paper aims to investigate the basic interaction characteristics of side-by-side moored vessels both numerically and experimentally. A higher-order boundary element method (HOBEM) combined with generalized mode approach is applied to analysis of motion and drift force of side-by-side moored multiple vessels (LNG FPSO, LNGC and shuttle tankers). Model tests were carried out for the same floating bodies investigated in the numerical study in regular and irregular waves. Global and local motion responses and drift forces of three vessels are compared with those of calculations. Discussions is highlighted on applicability of numerical method to prediction of sophisticated multi-body interaction problem of which motion behavior is very important to analysis of mooring dynamics of deep sea floating bodies.     

Mechanical Characteristics of Light-Weighted Soils Using Dredged Materials

This study investigates the mechanical characteristics of light-weighted soils (LWS) consisting of expanded polystyrene (EPS), dredged clays, and cement through both unconfined and triaxial compression tests. The mechanical characteristics of the compressive strength of LWS are analyzed with varying initial water contents of dredged clays, EPS ratio, cement ratio, and curing pressure. In the triaxial compression test, it is found that the compressive strength of LWS associated with EPS is independent on the effective confining pressure. When both EPS ratio is less than 2% and cement ratio is more than 2%, the compressive strength rapidly decreases after the ultimate value. This signifies that the compressive strength-strain behavior is quite similar to that of the cemented soil. The ground improved by LWS has the compressive strength of 200 kPa associated with the optimized EPS ratio of 3-4% and initial water content of 165-175%. The ultimate compressive strength under both triaxial and unconfined compression tests is almost constant for a cement ratio of up to 2%.     

Fluxes and sources of suspended organic matter in an estuarine turbidity maximum region during low discharge conditions

Water column concentrations of total suspended solids (TSS), particulate organic carbon (POC) and particulate nitrogen (PN) were measured at three different depths in four different locations bracketing the estuarine turbidity maximum (ETM) along the main channel of a temperate riverine estuary (Winyah Bay, South Carolina, USA). Measurements were carried out over full tidal cycle (over 24 h). Salinity, temperature, current magnitude and direction were also monitored at the same time throughout the water column. Tidally averaged net fluxes of salt, TSS, POC and PN were calculated by combining the current measurements with the concentration data. Under the extreme low river discharge conditions that characterized the study period, net landward fluxes of salt were measured in the lower part of the study area, suggesting that the landward transport through the main channel of the estuary was probably balanced by export out through the sides. In contrast, the net fluxes of salt in the upper reaches of the study area were near zero, indicating a closed salt balance in this part of the estuary. In contrast to salt, the net fluxes of TSS, POC and PN in the deeper parts of the water column were consistently landward at all four sites in Winyah Bay indicating the non-conservative behavior of particulate components and their active transport up the estuary in the region around the ETM.The carbon contents (%POC), carbon:nitrogen ratios (org[C:N]a) and stable carbon isotopic compositions (δ¹³C_POC) of the suspended particles varied significantly with depth, location and tidal stage. Tidally averaged compositions showed a significant increase up the estuary in the %POC and org[C:N]a values of suspended particles consistent with the preferential landward transport of carbon-rich particles with higher vascular plant debris content. The combination of tidal resuspension and flood-dominated flow appeared to be responsible for the hydrodynamic sorting of particles along the estuary that resulted in denser, organic-poor particles being transported landward less efficiently. The elemental and isotopic compositions indicated that vascular C₃ plants and estuarine algae were the major sources of the particulate organic matter of all the samples, without any significant contributions from salt marsh C₄ vegetation (Spartina alterniflora) and/or marine phytoplankton.     

海水中234Th的超低水平液闪谱仪测定

本文提出了利用超低水平液闪谱仪测定海水中234Th的方法.海水经氢氧化铁吸附共沉淀富集后,接着用阴离子交换和TBP/煤油萃取进行Th同位素的分离与纯化.对一系列测定条件进行了详细的研究,提出了测定海水中234Th的适宜程序,即在含有234Th和产额示踪剂230Th的纯化后的5mol/dm3HNO3溶液中加入TBP/煤油进行萃取,然后用0.1mol/dm3HNO3反萃取,后者是先用契伦柯夫计数法测量234Th(通过234mPa),后加入闪烁液Hisafe 3用α/β模式测量α放射体230Th.对于α和β放射体液闪谱仪的计数效率分别为100%和55.7%±2.7%.234Th的化学回收率和总探测效率分别为70%～80%和30%～45%.该法测定海水中的234Th快速、简便和高效.     

Cloning of cytochrome P450 1A (CYP1A) genes from the hermaphrodite fish Rivulus marmoratus and the Japanese medaka Oryzias latipes

To use two small fish Rivulus marmoratus (Cyprinodontiformes, Rivulidae) and the Japanese medaka Oryzias latipes (Belloniformes) as testing models in molecular ecotoxicology, we have cloned the cytochrome P450 1A (CYP1A) gene after screening of both genomic DNA libraries, and sequenced 11,863 and 7,243 bp including all the exons and introns with promoter regions, respectively. The Rivulus and the medaka CYP1A gene consisted of seven exons (including non-coding exons) with high homology to mammals. In the promoter region, Rivulus CYP1A gene has seven xenobiotic response elements (XREs) and two metal response elements (MREs), while the Japanese medaka CYP1A gene has six XREs and four MREs. Interestingly, medaka CYP1A gene has a number of MREs at the promoter, which may affect its response on metal exposure. We describe here the gene structure of both fish CYP1A genes.     

Freely floating-body simulation by a 2D fully nonlinear numerical wave tank

Nonlinear interactions between large waves and freely floating bodies are investigated by a 2D fully nonlinear numerical wave tank (NWT). The fully nonlinear 2D NWT is developed based on the potential theory, MEL/material-node time-marching approach, and boundary element method (BEM). A robust and stable 4th-order Runge–Kutta fully updated time-integration scheme is used with regriding (every time step) and smoothing (every five steps). A special φ_n-η type numerical beach on the free surface is developed to minimize wave reflection from end-wall and wave maker. The acceleration-potential formulation and direct mode-decomposition method are used for calculating the time derivative of velocity potential. The indirect mode-decomposition method is also independently developed for cross-checking. The present fully nonlinear simulations for a 2D freely floating barge are compared with the corresponding linear results, Nojiri and Murayama’s (Trans. West-Jpn. Soc. Nav. Archit. 51 (1975)) experimental results, and Tanizawa and Minami’s (Abstract for the 6th Symposium on Nonlinear and Free-surface Flow, 1998) fully nonlinear simulation results. It is shown that the fully nonlinear results converge to the corresponding linear results as incident wave heights decrease. A noticeable discrepancy between linear and fully nonlinear simulations is observed near the resonance area, where the second and third harmonic sway forces are even bigger than the first harmonic component causing highly nonlinear features in sway time series. The surprisingly large second harmonic heave forces in short waves are also successfully reproduced. The fully updated time-marching scheme is found to be much more robust than the frozen-coefficient method in fully nonlinear simulations with floating bodies. To compare the role of free-surface and body-surface nonlinearities, the body-nonlinear-only case with linearized free-surface condition was separately developed and simulated.     

合浦珠母贝26S蛋白酶体S4,S7亚基基因片段的分离与分析

26S蛋白酶体是真核生物中一种具有ATP依赖性的蛋白酶复合体,主要通过泛肽途径选择性降解细胞内与代谢调控、细胞周期有关的功能蛋白及异常蛋白,参与多种细胞活动的调控过程。26S蛋白酶体由具有催化活性的20S亚复合体和一个具有调节作用的19S亚复合体组成,其中19S亚复合体中的ATP酶亚基是调节26S蛋白酶体活性的重要组件。本通过简并引物PCR手段,从软体动物合浦珠母贝(Pinctada fucata)中扩增到参与构成19S亚复合体的S4和S7(MSS1)两个亚基的基因片段。这两个基因片段所编码的ATP酶组件包含有Gx4GKT,DEID,SAT和H／QRxGRxxR等26S蛋白酶体ATP酶亚基的共同功能基序。这是首次在软体动物中报道26S蛋白酶体的ATP酶亚基基因序列,为研究软体动物中26S蛋白酶体的结构与功能奠定了分子基础。     

基于非期望产出的中国滨海旅游生态效率评价——以我国沿海城市为例

旅游生态效率是反映旅游经济与旅游环境双向效应(bi-effect)的重要判断指标。本文基于非期望产出视角,采用超效率SBM模型,评价了我国东部沿海18个主要滨海旅游城市的旅游生态效率,并分析了其时空演变特征。研究结果表明:(1)中国东部沿海18市滨海旅游生态效率整体呈中等水平,平均值处于0.727～0.894,阶段特征明显,呈现前期平稳发展,中期下降,后期回升的发展趋势;(2)各城市滨海旅游生态效率水平差异显著,分为下行风险型,持续成长型,稳定型和波动型4种发展类型。平均效率值最高为天津,最低为三亚;(3)分解效率均值中纯技术效率较高,规模效率次之,技术进步是影响综合效率的主要因素;(4)投入冗余和非期望产出冗余已经成为阻碍滨海旅游生态效率进步的关键因素。