Regional modelling of permafrost thicknesses over the past 130 ka: implications for permafrost development in Great Britain

The greatest thicknesses of permafrost in Great Britain most likely occurred during the last glacial–interglacial cycle, as this is when some of the coldest conditions occurred during the last 1 000 000 years. The regional development of permafrost across Great Britain during the last glacial–interglacial cycle was modelled from a ground surface temperature history based on mean annual temperatures and the presence of glacier ice. To quantify the growth and decay of permafrost, modelling was undertaken at six locations across Great Britain that represent upland glaciated, lowland glaciated, upland unglaciated and lowland unglaciated conditions. Maximum predicted permafrost depths derived in this academic study range between several tens of metres to over 100 m depending upon various factors including elevation, glacier ice cover, geothermal heat flux and air temperature. In general, the greatest maximum permafrost thicknesses occur at upland glaciated locations, with minimum thickness at lowland sites. Current direct geological evidence for permafrost is from surface or shallow processes, mainly associated with the active layer. Further research is recommended to identify the imprint of freeze/thaw conditions in permanently frozen porous rocks from beneath the active layer.     

The multiple chronological techniques applied to the Lake Suigetsu SG06 sediment core,central Japan

The varved sediment of Lake Suigetsu (central Japan) provides a valuable opportunity to obtain high‐resolution, multi‐proxy palaeoenvironmental data across the last glacial/interglacial cycle. In order to maximize the potential of this archive, a well‐constrained chronology is required. This paper outlines the multiple geochronological techniques being applied – namely varve counting, radiocarbon dating, tephrochronology (including argon–argon dating) and optically stimulated luminescence (OSL) – and the approaches by which these techniques are being integrated to form a single, coherent, robust chronology. Importantly, we also describe here the linkage of the floating Lake Suigetsu (SG06) varve chronology and the absolute (IntCal09 tree‐ring) time scale, as derived using radiocarbon data from the uppermost (non‐varved) portion of the core. This tie‐point, defined as a distinct (flood) marker horizon in SG06 (event layer B‐07–08 at 1397.4 cm composite depth), is thus derived to be 11 255 to 11 222 IntCal09 cal. years BP (68.2% probability range).     

Formation of intracratonic basins by lithospheric shortening and phase changes: a case study from the ultra‐deep East Barents Sea basin

The origin of large subsidence in intracratonic basins is still under debate. We propose a new and self‐consistent model for the formation of those basins, where lithospheric shortening/buckling triggers metamorphism and densification of crustal mafic heterogeneities. We use a forward thermo‐mechanical finite element technique to evaluate this mechanism for the typical example of the East Barents Sea basin (EBB) where a very large and compensated subsidence, accommodating an up to 20‐km‐thick sediment succession, is observed. The lower crust in the dynamic model is modelled with petrologic‐consistent densities for a wet mafic gabbroic composition that depend on pressure and temperature taking into account dehydration at high PT conditions. The model successfully explains the main characteristics of the EBB, notably the large anomalous and fast subsidence during the Late Permian–Early Triassic, its present‐day geometry and the absence of a significant gravity anomaly.     

Natural aggregates in the performance and durability of concrete: chemical characteristics

This article continues from the earlier feature in Geology Today (2011, v.27, n.4) and looks at the influence of chemical reactivity within concrete due to the presence of unsound aggregates or deleterious material incorporated in the aggregate used in the concrete mix. Some of the more disruptive problems from chemical unsoundness come from the presence of chlorides, which cause rusting in reinforced concrete or, sulphate attack from ground waters. Both of these reactions are relatively common in Britain. Alkali–silica reactions with aggregates and cement is not too prevalent in Britain but can be very prevalent and disruptive elsewhere in the world.     

Thermodynamics of plagioclase III: Spontaneous strain at the I\overline 1 - P\overline 1 phase transition in Ca-rich plagioclase

The lattice parameters of anorthites An₉₈Ab₂ and An₁₀₀ have been measured from 22 to 1100 K. The spontaneous strain arising from the \(I\overline 1 - P\overline 1\) displacive transition in An₉₈ follows second order Landau behaviour. The spontaneous strain (? _s) couples quadratically to the order parameter (Q ⁰) with ? _s∝Q ⁰²∝(T _c ^* ?T) and T _c ^* =530 K in An₉₈. This is in contrast to the tricritical behaviour observed in pure anorthite. These observations are consistent with a Landau model for the free energy of Ca-rich plagioclases in which Al/Si order and Na content renormalize the fourth order coefficient.     

Observations of mid-troposhheric circulation from water vapour radiances of polar orbiting satellites

Water vapour tracers can provide useful information on winds at ≈ 500mb by observing the 6·7μ radiances. This fills the data gap in the cloud motion winds provided by conventional meteorological geostationary satellites. There is no geostationary satellite at present over the Indian Ocean with 6·7μ imaging capability to provide mid-tropospheric winds. The potentials of 6·7μ radiances, available from polar orbiting satellites, for mid-tropospheric circulation features have been examined in this study. Tiros-N satellite data of May 1979 and ECMWF level-IIIb wind data were analysed to relate the radiances with the streamlines. We find that the radiances of 6·7μ from orbiting satellites agree well with the wind field.     

Ultraviolet absorption cross-sections of chloro and chlorofluoro-methanes at stratospheric temperatures

Absorption cross-sections of nine halomethanes (CCl₄, CHCl₃, CH₂Cl₂, CH₃Cl, CFCl₃, CF₂Cl₂, CF₃Cl, CHFCl₂, and CHF₂Cl), measured between 174 and 250 nm for temperatures ranging from 225 to 295 K, are presented with uncertainties ranging from 2 to 4% and compared with previous determinations made for comparable temperature ranges.The largest temperature effect which takes place near the absorption threshold, decreases the absorption cross-section up to 50% for highly chlorinated methanes, but is negligible for molecules highly stabilized by hydrogen and/or fluorine. Extrapolated values for temperatures of aeronomical interest are presented, as well as parametrical formulas which give absorption cross-section values for given wavelength and temperature ranges.     

Field Comparison of Micropurging vs. Traditional Ground Water Sampling

Micropurge sampling of ground water wells has been suggested as a possible replacement to traditional purge and sample methods. To compare methods, duplicate ground water samples were collected at two field sites using iraditional and micropurge methods. Samples were analyzed for selected organic and inorganic constituents, and the results were compared statistically. Analysis of the data using the nonparametric sign test indicates that within a 95 percent confidence interval, there was no significant difference between the two methods for the site contaminants and the majority of analytes. These analytical results were supported by visual observations with the colloidal borescope, which demonstrated impacts on the flow system in the well when using traditional sampling methods. Under selected circumstances, the results suggest replacing traditional sampling with micropurging based on reliability, cost, and waste minimization.     

The reserves of extracted resources: Historical data

The available data on known reserves of extracted resources have not previously been tabulated and graphed. In this article we compile the reserves data in one place for the first time. This serves to (1) show the trends in the reserves series, (2) make the series available to others, and (3) place the reserves data in the context of price data for which longer series have been available, and with which they can now be seen to be consistent in both showing increasing availability rather than increasing scarcity.