Impact of grazing on soil,vegetation and ewe production performances in a semi-arid rangeland

Controlled grazing is considered a good management strategy to maintain or increase the live weight of livestock and to reduce vegetation degradation of rangelands. The present study investigated soil characteristics, aboveground vegetation biomass dynamics and controlled grazinginduced changes in the live weight of local ewes in the semi-arid rangeland of Ahmadun, Ziarat, Balochistan province of Pakistan. An area of 115 ha was protected from livestock grazing in April 2014. In June 2015, soil characteristics within 0-30 cm depth i.e. soil organic matter (SOM), mineral nitrogen, pH and texture in controlled and uncontrolled grazing sites were assessed. Aboveground vegetation biomass measured in early (June) and late summer (August) in 2015 and 2016. The nutritional value i.e. crude protein, phosphorus (P), neutral detergent fiber (NDF), acid detergent fiber (ADF), calcium (Ca), magnesium (Mg) and potassium (K) of dominant plant species were assessed at the beginning of experiment in 2015. Vegetation cover of controlled and uncontrolled grazing sites was also measured during the two years of the study period using the VegMeasure software. From June to November in 2015 and 2016, controlled and uncontrolled livestock grazing sites were grazed on a daily basis by local ewes with a stocking rate of 2 and 1 head ha-1 respectively. Results reveal that the organic matter contents of coarse-textured, slightly alkaline soil of the study site were in the range of 9.4 - 17.6 g kg-1 soil and showed a strong positive correlation with aboveground vegetation biomass. The biomass of plants was 56.5% and 33% greater at controlled than uncontrolled grazing site in 2015 and 2016 respectively and plant cover was also higher at controlled than uncontrolled grazing site in both years. The nutrient contents were significantly (P<0.05) lower in grasses than shrubs. In both years, the controlled grazing increased the weight gain of ewes about two folds compared to the uncontrolled grazing. The results indicate that controlled grazing improved the vegetation biomass production and small ruminant productivity.     

The role of sediment denitrification in reducing groundwater-derived nitrate inputs to Nauset Marsh estuary, Cape Cod, Massachusetts

The Nauset Marsh estuary is the most extensive (9.45 km²) and least disturbed salt marsh/estuarine system within the Cape Cod National Seashore, even though much of the 19 km² watershed area of the estuary is developed for residential or commercial purposes. Because all of the Nauset watershed is serviced by on-site individual sewage disposal systems, there is concern over the potential impact of groundwater-derived nutrients passing from these systems to the shallow receiving waters of the estuary. The purpose of this study was to determine whether denitrification (the bacterial conversion of nitrate to gaseous nitrogen) in estuarine sediments could effectively remove the nitrate from contaminated groundwater before it passed from the watershed to the estuary. Rates of denitrification were measured both in situ and in sediment cores, in areas of active groundwater discharge, in relatively pristine locations, and in areas situated down-gradient of moderate to heavily developed regions of the watershed. Denitrification rates for 47 sediment cores taken over an annual cycle at 5 stations ranged from non-detectable to 47 μmol N₂ m⁻² h⁻. Mean denitrification rates were positively correlated with sediment organic content, and varied seasonally due to changes in sediment organic content and to the effect of water temperatures on sediment oxygen penetration depths. There was no correlation between observed denitrification rates and corresponding nitrate concentrations in groundwater. A comparison of in situ denitrification rates (supported by groundwater nitrate) with denitrification rates observed in sediment cores (supported by remineralized nitrate) showed that groundwater-driven denitrification rates were small, and not in excess of denitrification rates supported by remineralized nitrate. Most of the denitrification in Nauset sediments was apparently fueled by remineralized nitrate through coupled nitrification/denitrification. Denitrification did not contribute significantly to the direct loss of nitrate from incoming groundwater at Nauset Marsh estuary. Groundwater flow was rapid, and much of it occurred in freshwater springs and seeps through very coarse, sandy, well-oxygenated sediments of limited organic content. There was little opportunity for denitrification to occur during groundwater passage through these sediments. These results have important management implications because they suggest that the majority of nitrogen from contaminated groundwater crosses the sediment/water interface and arrives at Nauset Estuary, where it is available to primary producers. Preliminary budget calculations suggest that while denitrification was not an effective mechanism for the direct removal of nitrate in contaminated groundwater flowing to Nauset Marsh estuary, it may contribute to significant nitrogen losses from the estuary itself.     

A model of diffuse degassing at three subduction-related volcanoes

2 and δ¹³C in soil gas were measured at three active subduction-related stratovolcanoes (Arenal and Poás, Costa Rica; Galeras, Colombia). In general, Rn, CO₂ and δ¹³C values are higher on the lower flanks of the volcanoes, except near fumaroles in the active craters. The upper flanks of these volcanoes have low Rn concentrations and light δ¹³C values. These observations suggest that diffuse degassing of magmatic gas on the upper flanks of these volcanoes is negligible and that more magmatic degassing occurs on the lower flanks where major faults and greater fracturing in the older lavas can channel magmatic gases to the surface. These results are in contrast to findings for Mount Etna where a broad halo of magmatic CO₂ has been postulated to exist over much of the edifice. Differences in radon levels among the three volcanoes studied here may result from differences in age, the degree of fracturing and faulting, regional structures or the level of hydrothermal activity. Volcanoes, such as those studied here, act as plugs in the continental crust, focusing magmatic degassing towards crater fumaroles, faults and the fractured lower flanks. Received: 16 December 1997 / Accepted: 27 January 2000     

Seismic tomography: Application for archaeological purposes

Work on the excavations at the ancient Etruscan settlement of Marzabotto (Bologna) restarted in 1988. These excavations, as they were worked, brought to light a complete urban layout represented primarily by foundations, courtyards, roads and wells. The site has been the focus of intensive experimentation to assess the feasibility of geophysical remote sensing in exploration archaeology. Different geophysical techniques have been tested at this site: geoelectric, electromagnetic, magnetic, and seismic methods. One of the methods tested was geophysical seismic tomography. This method utilizes straightray algorithms to map subsurface properties by analyzing the first signal arrival time. Seismic tomography treats the problem of identifying a buried structure as a wave propagation process by inverting the linearized wave equation to compute the spatial distribution of the slowness of the velocity. The purpose of our tomographic study is to further test the method and to guide archaeologists in their future excavations by locating and identifying buried structures. In particular, analyses are performed on the geometries, signal characteristics, discretization of the area, and constraints of the inversion algorithm in order to enhance the effectiveness of the tomographic reconstruction process and to reduce costs. A controlled experiment is presented for a typical Marzabotto buried structure with which it is possible to verify the effectiveness of the applied technique. It is demonstrated how proper field measures and an inversion test can provide reliable information that can be used to guide excavation work. © 1994 John Wiley & Sons, Inc.     

Growth dynamics and bioactivity variation of the Mediterranean demosponges Agelas oroides (Agelasida, Agelasidae) and Petrosia ficiformis (Haplosclerida, Petrosiidae)

Growth dynamics and bioactivity variation of the Mediterranean demosponges Agelas oroides and Petrosia ficiformis were investigated over 15 months at Paraggi and Colombara within the Marine Reserve of Portofino Promontory (Mediterranean Sea, Ligurian Sea, Italy). For both species, growth rates varied between individuals and were unaffected by initial sponge size. The two species showed a different trend in growth pattern: A. oroides did not vary significantly between seasons, sites and depths; in contrast, some individuals of P. ficiformis showed a seasonal pattern, shrinking during winter as water temperature decreased and growing during summer when water temperature increased. Differences in growth between the two species may result from different reproductive cycles, food availability, species-specific thermophily and patterns of spatial competition. Moreover, spatial competition probably induced sponges to produce bioactive secondary molecules. Spatial and temporal variation of bioactivity of both species was examined for the first time by studying its effect on human neuroblastoma cells. The bioactivity of A. oroides extracts differed significantly between seasons, sites and depths, whereas the cytotoxicity of P. ficiformis differed significantly between seasons and depths (differences for sites were not determined). These results suggest the possible influence of environmental factors on bioactive metabolite biosynthesis.     

Knowledge-based systems as decision support tools in an ecosystem approach to fisheries: Comparing a fuzzy-logic and a rule-based approach

In an ecosystem approach to fisheries (EAF), management must draw on information of widely different types, and information addressing various scales. Knowledge-based systems assist in the decision-making process by summarising this information in a logical, transparent and reproducible way. Both rule-based Boolean and fuzzy-logic models have been used successfully as knowledge-based decision support tools. This study compares two such systems relevant to fisheries management in an EAF developed for the southern Benguela. The first is a rule-based system for the prediction of anchovy recruitment and the second is a fuzzy-logic tool to monitor implementation of an EAF in the sardine fishery. We construct a fuzzy-logic counterpart to the rule-based model, and a rule-based counterpart to the fuzzy-logic model, compare their results, and include feedback from potential users of these two decision support tools in our evaluation of the two approaches. With respect to the model objectives, no method clearly outperformed the other. The advantages of numerically processing continuous variables, and interpreting the final output, as in fuzzy-logic models, can be weighed up against the advantages of using a few, qualitative, easy-to-understand categories as in rule-based models. The natural language used in rule-based implementations is easily understood by, and communicated among, users of these systems. Users unfamiliar with fuzzy-set theory must “trust” the logic of the model. Graphical visualization of intermediate and end results is an important advantage of any system. Applying the two approaches in parallel improved our understanding of the model as well as of the underlying problems. Even for complex problems, small knowledge-based systems such as the ones explored here are worth developing and using. Their strengths lie in (i) synthesis of the problem in a logical and transparent framework, (ii) helping scientists to deliberate how to apply their science to transdisciplinary issues that are not purely scientific, and (iii) representing vehicles for delivering state-of-the-art science to those who need to use it. Possible applications of this approach for ecosystems of the Humboldt Current are discussed.     

Population structure, size at maturity and condition of sardine, Sardina pilchardus (Walb., 1792), in the nursery ground of the eastern Adriatic Sea (Krka River Estuary, Croatia)

A total of 1125 specimens of sardine, Sardina pilchardus, ranging in total length from 4.9 to 12.5 cm (mean 8.31 ± 1.41 cm) and in weights between 1.02 g and 11.18 g (mean 4.40 ± 1.87 g) were randomly sampled using a beach seine from the Krka River estuary. Samples were collected monthly according to their occurrence in this area from October to February during 2002/03, 2003/04 and 2004/05, which is during the spawning period of this species. Monthly fluctuations in the length frequency distributions of sardine were observed during that time. The length–weight relationship of all sardine specimens was described by the equation: W=0.007L^2.9587(r² = 0.9626); and the isometric nature of relative growth was established (t = −5.1495; p < 0.05). According to the allometric condition factor K_a, sardine specimens were in better somatic condition at the beginning of their appearance (spawning period) in the Krka River estuary. The length at which 50% of sardines were mature (L₅₀) was calculated to be 7.9 cm.     

Wave overtopping and piling-up at permeable low crested structures

The paper aims at providing a simple model for evaluating piling-up, overtopping, filtration and rip currents for low crested structures. The model is essentially based on mass and momentum balance and on resistance laws that relate piling-up and mass fluxes. A procedure is suggested and validated against 2D and 3D experimental data. This procedure is innovative with respect to existing formulations since it applies both to emerged and submerged structures and it simultaneously accounts for structure permeability, return flow through gaps and dissipative effects.     

An attempt to use LA-ICP-SMS to quantify enrichment of trace elements on pyrite surfaces in oxidizing mine tailings

Metals released from oxidation and weathering of sulphide minerals in mine tailings are to a high degree retained at deeper levels within the tailings themselves. To be able to predict what could happen in the future with these secondarily retained metals, it is important to understand the retention mechanisms. In this study an attempt to use laser ablation high-resolution ICP-MS (LA-ICP-SMS) to quantify enrichment of trace elements on pyrite surfaces in mine tailings was performed. Pyrite grains were collected from a profile through the pyrite-rich tailings at the Kristineberg mine in northern Sweden. At each spot hit by the laser, the surface layer was analyzed in the first shot, and a second shot on the same spot gave the chemical composition of the pyrite immediately below. The crater diameter for a laser shot was known, and by estimating the crater depth and total pyrite surface, the total enrichment on pyrite grains was calculated. Results are presented for As, Cd, Co, Cu, Ni and Zn. The results clearly show that there was an enrichment of As, Cd, Cu and Zn on the pyrite surfaces below the oxidation front in the tailings, but not of Co and Ni. Arsenic was also enriched on the pyrite grains that survived in the oxidized zone. Copper has been enriched on pyrite surfaces in unoxidized tailings in the largest amount, followed by Zn and As. However, only 1.4 to 3.1% of the Cd and Zn released by sulphide oxidation in the oxidized zone have been enriched on the pyrite surfaces in the unoxidized tailings, but for As and Cu corresponding figures are about 64 and 43%, respectively. There were many uncertainties in these calculations, and the results shall not be taken too literally but allowed the conclusion that enrichment on pyrite surfaces is an important process for retention of As and Cu below the oxidation front in pyrite rich tailings. Laser ablation is not a surface analysis technique, but more of a thin layer method, and gives no information on the type of processes resulting in enrichment on the pyrite surfaces. Although only pyrite grains that appeared to be fresh and without surface coatings were used in this study, the possibility that a thin layer of Fe-hydroxides occurred must be considered. Both adsorption to the pyrite directly or to Fe-oxyhydroxides may explain the enrichment of As, Cd, Cu and Zn on the pyrite surfaces, and, in the case of Cu, also the replacement of Fe(II) by Cu(II) in pyrite.