A near-inertial current event in the homogeneous deep layer of the northern Sea of Japan during winter

Under strong surface wind forcing during winter, direct current observations in the northern Sea of Japan show the existence of strong near-inertial currents in the deep water that is characterized by the extremely homogeneous vertical structures of temperature and salinity. However, the mechanism generating internal waves in the deep water of the northern Sea of Japan has not been well understood. In this study, to clarify the dynamical link between the surface wind forcing and near-inertial currents in the deep water of the northern Sea of Japan, we drive a general circulation model taking into account realistic wind stress, ocean bottom and land topography. In the northern Sea of Japan, the numerical results show that vertically coherent horizontal currents with a speed of ~ 0.05 m s^?1 are excited throughout the homogeneous deep water. A two-layer model successfully reproduces the pattern of the horizontal current velocities shown by the general circulation model, indicating that internal waves emanate westward from the northwestern coast of Japan through coastal adjustment to the strong wind forcing event and, while propagating into the ocean interior, they excite evanescent near-inertial response throughout the lower layer below the interface.     

Relation between chemical composition and particle-size distribution of ores in the profile of nickeliferous laterite deposits of the Rio Tuba Mine, Philippines

Lateritic Ni ore mined in the Rio Tuba Mine, Philippines, derived from ultramafic rock by tropical intense weathering, is generally composed of two accumulated zones, an upper laterite zone and a lower saprolite zone. These two zones are very different in appearance, mineral assemblage, chemical composition, and in other ways. A transitional zone may be seen between the upper and lower zones, but it does not develop to any appreciable thickness. Although serpentine and goethite are still predominant in the constituent minerals, other clay minerals are increasing.

The transitional zone may be subdivided into three groups based on chemical composition. The behaviour of the chemical composition in this horizon indicates a complicated process of component transportation under the weathering process.

In the ore, chemical components are closely related in particle size of constituent minerals. In the laterite - transitional - saprolite sequence, a common variation range and tendency in chemical composition for each particle size can be seen. However, taking samples with the same particle size the chemical composition obviously differed, representing the characteristics of the components for each zone.

Concerning the correlation coefficient of the chemical components of each zone, a somewhat different inter-component relationship can be seen in these zones. These differences of correlation suggest the different complicated lateritized conditions under which they are formed.     

Episodic accretion and metamorphism of Jurassic accretionary complex based on biostratigraphy and K-Ar geochronology in the western part of the Mino-Tanba Belt, Southwest Japan

Abstract The low grade metamorphic Jurassic accretionary complex in the western part of the Mino-Tanba Belt, Southwest Japan, is a chaotic sedimentary complex which consists of argillaceous matrices with allochthonous blocks of chert, greenstone, siliceous mudstone, terrigenous sandstone and mudstone. The complex is divided into three distinct geologic units, Units I, II and III, with a tectonic boundary (thrust) between them, forming a pile-nappe structure. They have different features for lithologies, fossil age, metamorphic condition and K-Ar age. Microfossil researches revealed that their timings of accretion were in the early Early Jurassic ( ca 195 Ma) for Unit III, in the early Middle Jurassic ( ca 175 Ma) for Unit II and in the latest Late Jurassic (ca 147 Ma) for Unit I. On the other hand, K-Ar age determinations of white mica separated from pelitic rocks of the three units clarified that the subsequent subduction-related metamorphism was 23 million years after the accretion of each unit. These results strongly suggest that the accretionary and metamorphic process had taken place episodically with an interval of 20 to 28 million years during Mesozoic time in the western part of the Mino-Tanba Belt, Southwest Japan.     

International survey on the distribution of stranded and buried litter on beaches along the Sea of Japan

The distribution and abundance of marine litter on 26 beaches along the Sea of Japan were investigated from September to November 2000. The mean concentration of stranded litter in Japan and Russia was 2144 and 1344 g/100 m(2), respectively. The mean number of pieces of stranded litter in Japan and Russia was 341 and 20.7/100 m(2), respectively. The most abundant type of stranded litter was plastic, which accounted for 40-80 % of the total items in terms of weight and number. The mean concentration of buried litter in Japan and Russia was 9.03 and 2.70 g/m(2), respectively. The total weight ratio of buried litter to stranded litter in the samples was 0.65, suggesting the significance of buried litter when evaluating the status of litter on beaches. Resin pellets were found on 12 Japanese beaches, but on none of the Russian beaches.     

The Role of History-Dependent Rheology in Plate Boundary Lubrication for Generating One-Sided Subduction

We have developed a two-dimensional dynamical model of asymmetric subduction integrated into the mantle convection without imposed plate velocities. In this model we consider that weak oceanic crust behaves as a lubricator on the thrust fault at the plate boundary. We introduce a rheological layer that depends on the history of the past fracture to simulate the effect of the oceanic crust. The thickness of this layer is set to be as thin as the Earth's oceanic crust. To treat 1-kilometer scale structure at the plate boundary in the 1000-kilometer scale mantle convection calculation, we introduce a new numerical method to solve the hydrodynamic equations using a couple of uniform and nonuniform grids of control volumes. Using our developed models, we have systematically investigated effects of basic rheological parameters that determine the deformation strength of the lithosphere and the oceanic crust on the development of the subducted slab, with a focus on the plate motion controlling mechanism. In our model the plate subduction is produced when the friction coefficient (0.004–0.008) of the modeled oceanic crust and the maximum strength (400 MPa) of the lithosphere are in plausible range inferred from the observations on the plate driving forces and the plate deformation, and the rheology experiments. In this range of the plate strength, yielding induces the plate bending. In this case the speed of plate motion is controlled more by viscosity layering of the underlying mantle than by the plate strength. To examine the setting of the overriding plate, we also consider the two end-member cases in which the overriding plate is fixed or freely-movable. In the case of the freely-movable overriding plate, the trench motion considerably changes the dip angle of the deep slab. Especially in the case with a shallow-angle plate boundary, retrograde slab motion occurs to generate a shallow-angle deep slab.     

Numerical forecasting of the time interval between successive M8 earthquakes along the Nankai Trough,southwest Japan,using ocean bottom cable network data

One possible approach to estimating the time interval between large-scale Tōnankai (Tōkai) and Nankai earthquakes on the Japan arc is sequential assimilation of crustal deformation data. We conducted numerical modeling of sequential assimilation using surface deformation calculated from earthquake generation cycle simulations along the Nankai Trough. To account for observation noise, we used measured ocean bottom pressure gauge data, excluding tidal modulation, from a station on the ocean bottom cable network Dense Oceanfloor Network System for Earthquakes and Tsunamis in the Kumano basin. We used sequential importance sampling as our data assimilation method. We found that as the amount of data increased, the estimated time interval between the Tōnankai and Nankai earthquakes approached the “true” observed interval. In addition, the noise in the pressure gauge data was sufficiently small that simulated crustal deformation patterns could be distinguished for different time intervals.     

Frost heaving in ballast railway tracks

Frost heaving is a well-known phenomenon in cold regions, which may occur in wet clayey grounds during winter. Railway track upheaval occurring in cold regions during the winter is generally understood as frost heaving in the subgrade layer. However, it has been confirmed that upheaval due to frost heaving sometimes occurs in the ballast layer. This understanding has been observed in active railways in northern Japan. The samples collected from ballast and subgrade layers have been examined for frost heave susceptibilities and confirmed that ballast layers which contain fines may heave.     

Conversion between solid and beam element solutions of finite element method based on meta-modeling theory: development and application to a ramp tunnel structure

In this study, a new method for conversion of solid finite element solution to beam finite element solution is developed based on the meta-modeling theory which constructs a model consistent with continuum mechanics. The proposed method is rigorous and efficient compared to a typical conversion method which merely computes surface integration of solid element nodal stresses to obtain cross-sectional forces. The meta-modeling theory ensures the rigorousness of proposed method by defining a proper distance between beam element and solid element solutions in a function space of continuum mechanics. Results of numerical verification test that is conducted with a simple cantilever beam are used to find the proper distance function for this conversion. Time history analysis of the main tunnel structure of a real ramp tunnel is considered as a numerical example for the proposed conversion method. It is shown that cross-sectional forces are readily computed for solid element solution of the main tunnel structure when it is converted to a beam element solution using the proposed method. Further, envelopes of resultant forces which are of primary importance for the purpose of design, are developed for a given ground motion at the end.     

Remote effects of mixed layer development on ocean acidification in the subsurface layers of the North Pacific

Using the outputs of projections under the highest emission scenario of the representative concentration pathways performed by Earth system models (ESMs), we evaluate the ocean acidification rates of subsurface layers of the western North Pacific, where the strongest sink of atmospheric CO₂ is found in the mid-latitudes. The low potential vorticity water mass called the North Pacific Subtropical Mode Water (STMW) shows large dissolved inorganic carbon (DIC) concentration increase, and is advected southwestward, so that, in the sea to the south of Japan, DIC concentration increases and ocean acidification occurs faster than in adjacent regions. In the STMW of the Izu-Ogasawara region, the ocean acidification occurs with a pH decrease of ~0.004 year^?1 , a much higher rate than the previously estimated global average (0.0023 year^?1), so that the pH decreases by 0.3–0.4 during the twenty-first century and the saturation state of calcite (Ω_Ca) decreases from ~4.8 down to ~2.4. We find that the ESMs with a deeper mixed layer in the Kuroshio Extension region show a larger increase in DIC concentration within the Izu-Ogasawara region and within the Ryukyu Islands region. Comparing model results with the mixed layer depth obtained from the Argo dataset, we estimate that DIC concentration at a depth of ~200 m increases by 1.4–1.6 μmol kg^?1 year^?1 in the Izu-Ogasawara region and by 1.1–1.4 μmol kg^?1 year^?1 in the Ryukyu Islands region toward the end of this century.