Effects of size and strain rate on the mechanical behaviors of rock specimens under uniaxial compression

Size and strain rate are two key factors that dramatically influence the estimation of rock mechanical behaviors. To better understand the effects of size and strain rate on measured rocks, rock specimens with six different sizes were tested at six different strain rates under uniaxial compression using the MTS 815 Rock Mechanics Test System. Having determined that the size and strain rate significantly affect the peak strain, peak stress, elastic modulus, acoustic emission (AE), and failure pattern of the rock specimens, the relation was established between the strength and the size and strain rate of red sandstone. And the variation was revealed among the size and strain rate, the AE, and the failure pattern. It turned out that the peak stress was negatively correlated with the rock size and was positively correlated with the strain rate. When the length to diameter ratio (L/D) of the rock specimen was less than 2.0, the AE appeared mildly. The AE quantities gradually increased before the peak stress, and then sharply decreased after the peak stress. The failure pattern of the rock specimen was relatively complicated, with a fracture plane appearing along the axial direction. Conical failure type was also presented. When the L/D ratio of the specimen was greater than 2.0, the AE characteristics of red sandstone showed the radical model. There were relatively few AE rings before the peak stress. But the AE rings increased suddenly and dramatically during the peak stress. The rock specimens primarily failed with a single shear plane. Moreover, with an increase in the strain rate, the AE activities were enhanced and the AE quantities increased. When the strain rate of the rock specimen was less than 5.0?×?10^?4/s, the rock specimen failed with a shear or tensile-shear pattern. And when the strain rate was greater than 5.0?×?10^?4/s, the rock specimen tended to fail in a conical pattern.     

阿尔金中段大通沟花岗岩体年代学、地球化学特征及其成因

出露于阿尔金中段的大通沟花岗岩体,岩性主要为二长花岗岩,LA-ICP-MS锆石U-Pb年龄为(353.7±1.1)Ma。SiO_2为74.5%~76.2%,Al_2O_3为12.62%~14.15%,(Na_2O+K_2O)为7.71%~8.29%,K_2O/Na_2O为0.9~1.22,A/CNK介于1.0~1.19之间,属高钾钙碱性系列的过铝质-强过铝质花岗岩。该岩石富集大离子亲石元素(LILE),亏损素Ba、Nb、Sr、P、Ti等高场强元素(HFSE);∑REE变化范围大(∑REE=85.7×10~(-6)~153.2×10~(-6),平均为111×10~(-6)),具有强烈的负Eu异常(δEu=0.03~0.59,平均0.33),LREE/HREE=3.52~11.9,轻稀土相对富集,轻重稀土分馏明显。微量元素地球化学特征表明,其源区物质主要来源于上地壳的变杂砂岩和变泥质岩类。锆石饱和温度计演算结果显示锆石的结晶温度为722~745℃(平均735℃),估算二长花岗岩源区的压力为0.8~1.6GPa。综合区域地质资料,阿尔金中段大通沟花岗岩体的形成与造山带根部块体的拆沉作用有关。     

美国声波钻进规程ASTM D6914/D6914M—16浅析

声波钻进技术具有速度快、岩心保真好、适用地层广等优点,广泛应用于工程勘察、环境调查、浅源地热、基础工程、矿山治理等领域。为了提高声波钻进施工质量和过程控制,美国材料与实验协会于2004年制定了第一部声波钻进规程D6914—04,后经多次修订完善,形成最新声波钻进规程D6914/D6914M—16。本文根据该版规程内容,从技术原理、钻进设备、成孔工艺等方面展开了阐述。当振动器与钻柱谐振频率重叠时,声波钻头受到的能量达到峰值。钻机和取心钻具是声波钻进的核心设备。成孔工艺主要以双管高频振动、低速回转为主,实现多种目的层的原位取心作业。标准相关内容对声波钻进技术在我国的持续推广具有参考意义。     

缅甸与莫桑比克红宝石的元素含量及紫外可见光谱学特征对比研究

采用镜下观察、激光剥蚀电感耦合等离子体质谱、紫外-可见吸收光谱等观察测试方法,对缅甸和莫桑比克红宝石的常规宝石学、包裹体、化学元素含量及紫外光谱特征进行了系统的对比研究。结果表明,缅甸红宝石在紫外荧光灯下呈现较强的红色荧光,内部含有互为60°夹角定向排列的短针状金红石、"糖浆状"构造等特征包裹体,具有低Fe、高V、高Ga的微量元素特征,紫外区吸收截止边小于320 nm,且694 nm处的荧光较强。莫桑比克红宝石在紫外荧光灯下荧光较弱,内部可见双晶面、无序排列的金红石和角闪石晶体等特征包裹体,具有高Fe、低V、低Ga的微量元素特征,紫外区吸收截止边在350 nm附近。上述性质可用作区分缅甸和莫桑比克红宝石的标志性识别特征。     

新疆哈密地区早泥盆世珊瑚动物群及其地质意义

新疆哈密地区下泥盆统发育,南部图拉尔根地区下泥盆统为大南湖组,北部三道白杨沟地区为卓木巴斯套组。在大南湖组中共发现四射珊瑚2属5种,床板珊瑚7属12种,并建立四射珊瑚组合Syringaxon moriense和床板珊瑚组合Pseudofavosites giganteus;在卓木巴斯套组共发现四射珊瑚5属7种,床板珊瑚2属2种,并建立四射珊瑚组合Orthopaterophyllum junggarense和床板珊瑚组合Pachyfavosites junggarensis。通过珊瑚在地层中的分布及组合的时代对比,确定前者的时代为早泥盆世埃姆斯期早期,后者的时代为埃姆斯期中晚期。通过与国内外典型的早泥盆世埃姆斯期珊瑚动物群的对比,认为哈密地区的珊瑚动物具有典型的早泥盆世温带动物群特征,在生物古地理区系上属于北方大区准噶尔-兴安省。     

Reservoir architecture and fracture characterization of low-permeability sandstone reservoir: a case study of Biandong oilfield,Jinhu depression,northern Jiangsu Basin,China

Fracture is one of the most important factors through the whole process of low-permeability reservoir development. Biandong oilfield is a typical low-permeability fractured sandstone reservoir, and has stepped into high water cut stage; thus, the waterflooding effect is poor. Therefore, many contradictions such as high moisture content, decreasing production speed, and low recovery efficiency are becoming increasingly prominent, which have seriously hindered the sustainable development, and need to be solved urgently. However, few such studies on reservoir characterization in low-permeability fractured sandstone reservoir have been conducted in China. In this study, through comprehensive analysis on reservoir characterization and sedimentary environment, significant results are achieved. Three types of fracture occurrence are identified; they are high-angle fracture, low-angle fracture, and horizontal fracture, respectively. Two types of reservoir pore (primary porosity and secondary porosity) are recognized based on thin-section observation and analysis. The diagenetic stage of Biandong oilfield are divided into three stages, early A, early B, and late A, respectively. Finally, a regional discrete fracture network model is established with Fisher’s algorithm based on three-dimensional geological model. All the research results presented above can make a significant instructing function for making reservoir development plan and improving recovery efficiency.     

内蒙古1∶5万乌音呼日勒庙等四幅区域地质矿产调查新进展

内蒙古1∶5万乌音呼日勒庙等四幅区域地质矿产调查项目取得的新进展及主要成果为: 根据岩石组合、动植物化石及同位素年龄等,重新厘定、划分了16个岩石地层填图单位,在多个组段沉积岩层位中首次发现丰富的动、植物化石,建立了各地层年代学格架; 将侵入岩重新解体划分为4个填图单元,并建立了侵入岩年代学格架; 新发现1处规模较大的韧性变形带,主要为逆—左行走滑韧性断层,时代归属于中三叠世末期,为额尔古纳河—阿龙山NE向韧性变形域的南部延伸; 新发现矿(化)点20处,其中金属矿点3处,金属矿化点6处,非金属矿点9处,非金属矿化点2处; 总结了该区成矿规律,圈定了成矿远景区及找矿靶区。     

鲁东地区地热资源分布规律及勘查定井方法探讨

鲁东地区具有丰富的地热资源,在地热勘查、开发和利用中,对地热勘查定井方法的选择至关重要。在介绍鲁东地区地热资源分布特征和赋存规律的基础上,结合鲁东地区地热勘查及施工的经验和教训,针对不同的地热地质条件,分别采用天然电场选频、瞬变电磁法(TEM)测深、可控源音频大地电磁测深(CSAMT)、电磁测深和自然放射能测深等方法对鲁东地区典型地热勘查区进行地热井位确定,并对勘查定井方法效果进行对比。结果表明: 鲁东地热资源主要分布在NE向、NNE向及NW向断裂交汇带附近,为断裂控制的深循环对流型带状地热资源,热储分布主要受断裂控制,勘查定井宜选择在2条或多条断裂的交汇处; 天然电场选频、瞬变电磁法测深对于浅部地层和断裂具有较好的反映; 可控源音频大地电磁测深对断裂深部发育特征反映明显,为鲁东地热勘查定井较适宜的方法; 地热勘查定井宜采用2种以上的勘查方法,避免在物探施工过程中受外在因素的影响。     

瑞典实物地质资料管理与服务现状

本文通过开展瑞典实物地质资料管理与服务跟踪研究,分析了瑞典实物地质资料管理与信息服务现状,掌握了瑞典在实物地质资料管理服务方面的政策法规、馆藏机构,以及资料汇聚、资料保管、资料数字化和信息服务现状;分析了瑞典岩芯高光谱红外成像2级数据产品服务的典型模式和可借鉴的经验,提出了对推进我国实物地质资料管理与信息服务的启示。