Screening of polymers on selected Hawaii soils for erosion reduction and particle settling

In recent years, high‐molecular‐weight anionic polyacrylamides (PAMs) have been tested on a variety of soils, primarily in temperate climates. However, little information is available regarding the effectiveness of PAM for preventing soil loss through runoff in tropical settings. Screening tests were performed using three negatively charged PAMs and one positively charged PAM on five Hawaii soils (two Oxisols, one Vertisol, and two Aridisols) to determine erosion loss, sediment settling, and aggregate stability. A laboratory‐scale rainfall simulator was used to apply erosive rainfall at intensities from 5 to 8·5 cm h^?1 at various PAM doses applied in both dry and solution forms. Soil detachment due to splash and runoff, as well as the runoff and percolate water volumes, were measured for initial and successive storms. The impact of PAM on particle settling and aggregate stability was also evaluated for selected soil‐treatment combinations. Among the PAMs, Superfloc A‐836 was most effective, and significantly reduced runoff and splash sediment loss for the Wahiawa Oxisol and Pakini Andisol at rates varying between 10 and 50 kg ha^?1. Reduced runoff and splash sediment loss were also noted for PAM Aerotil‐D when applied in solution form to the Wahiawa Oxisol. Significant reductions in soil loss were not noted for either the Lualualei Vertisol or the Holomua Oxisol. It is believed that the high montmorillonite content of the Lualualei Vertisol and the low cation‐exchange capacity of the Holomua Oxisol diminished the effectiveness of the various PAMs tested. The polymers were also found to enhance sediment settling of all soils and helped improve their aggregate stability. This screening study shows the potential use of PAM for tropical soils for applications such as infiltration enhancement, runoff reduction, and enhanced sedimentation of detention ponds. Copyright © 2005 John Wiley & Sons, Ltd.     

Analytical solutions of one‐dimensional infiltration before and after ponding

This paper is a continuation of previous research, which obtained a convenient solution for arbitrary surface fluxes before ponding. By means of Fourier Transformation this has been extended to derive analytical solutions of a linearized Richards' equation for arbitrary input fluxes after surface saturation. Copyright © 2003 John Wiley & Sons, Ltd.     

Geochemical correlations between effusive and explosive silicic volcanics in the Saraykent region (Yozgat), central Anatolia,Turkey

Two main volcanic events are distinguished between Saraykent and Akçakışla in the Yozgat province of central Anatolia: (1) early Late Cretaceous–Palaeocene effusive activity, that produced a sequence of intermediate to felsic ‘basal lavas’; and (2) marginally later Palaeocene explosive activity that formed a series of covering ignimbrite flows. Due to their close temporal and spatial relation, geochemical comparisons were made between the silicic members of the lavas and ignimbrites, to identify chemical groups and their relative petrogenesis. The basal lavas range from calc‐alkaline basaltic andesites to dominant rhyolites. Based on trace element correlations three main geochemical groups were identified: the Akçakışla rhyolites (present as domes); Akçakışla rhyodacites‐dacites (lava flows); and Ozan‐Saraykent rhyolites (lava flows). Large‐ion lithophile elements have been mobile in all the groups, but mainly in the Akçakışla rhyolites. Rare earth element (REE) patterns show marked similarity between the Ozan and Saraykent basal lavas. The Akçakışla dome rhyolites are more fractionated with lower La_N/Yb_N ratios (c.10), whereas the Akçakışla basal lavas have much higher La_N/Yb_N ratios (c.30). The chemical coherence and petrographic similarities between the Saraykent and Ozan lavas suggest a single suite related via fractionation. Three geochemical groups were also established for the ignimbrites: Saraykent ignimbrite; Bağlıca ignimbrite‐Toklu‐Kızıldağ crystal tuffs; and Keklikpınar ignimbrite. The ignimbrites, like the basal lavas, display a pronounced depletion in Ba on ORG‐normalized plots. Relative to the basal lavas, chondrite‐normalized patterns for the ignimbrites are different in displaying negative Eu anomalies that indicate feldspar fractionation. The lack of geochemical overlap or coherence between any of the lava and ignimbrite groups suggests that they represent distinct eruptive events and are not related in any simple volcanic development and cogenetic sense. Two geochemical features are common to all the volcanic rock groups: (1) the presence of a Nb‐Ta anomaly, which is generally accepted as a crustal signature; and (2) the relatively low Y abundances which appear characteristic for the region as a whole. These fundamental features of the local silicic volcanism largely reflect source composition and effects. Copyright © 2002 John Wiley & Sons, Ltd.     

Finite element analysis of the effect of corrosion on the behavior of reinforced earth walls

A simple model for the corrosion‐induced loss of stiffness and strength of the steel strips of earth‐reinforced walls was introduced in a finite element simulation of the long‐term behavior of the wall, in which the backfill‐strips interactions are taken into account by means of a generalized homogenization procedure (called a multiphase model). The results show an initial phase of slow displacements induced by the loss of stiffness, followed after a few decades by a steep acceleration of the displacements, leading to wall failure. The influences of the parameter controlling corrosion, the backfill cohesion and the heterogeneity of the corrosion process are discussed. Results are used to discuss a strategy for reinforced earth wall surveillance. Copyright © 2011 John Wiley & Sons, Ltd.     

A mass ratio limit for primordial black holes

We augment our scenario for the formation of astronomical objects from macroscopic superstrings by the assumption that the central matter keeps its identity in the fragmentation. From the condition that the angular momentum per mass squared of this matter should be less than the Kerr limit G/c, we obtain upper limits for the ratio of the mass of central black holes M(BH) to the mass M of the host object. This limit is M(BH)/M ≈ 0.001, and, expressed in observed quantities, approximately M(BH)/M ≈ σ²/(v · c) where σ is the r.m.s. velocity, v the rotational velocity and c the velocity of light. The valuesM(BH) agree with the observed behaviour both in order of magnitude and in the variation with velocity dispersion. (© 2003 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Similarity measurement on human mobility data with spatially weighted structural similarity index (SpSSIM)

Understanding diverse characteristics of human mobility provides profound knowledge of urban dynamics and complexity. Human movements are recorded in a variety of data sources and each describes unique mobility characteristics. Revealing similarity and difference in mobility data sources facilitates grasping comprehensive human mobility patterns. This study introduces a new method to measure similarities on two origin–destination (OD) matrices by spatially extending an image‐assessment tool, the structural similarity index (SSIM). The new measurement, spatially weighted SSIM (SpSSIM), utilizes weight matrices to overcome the SSIM sensitivity issue due to the ordering of OD pairs by explicitly defining spatial adjacency. To evaluate SpSSIM, we compared performances between SSIM and SpSSIM with resampling the orders of OD pairs and conducted bootstrapping to test the statistical significance of SpSSIM. As a case study, we compared OD matrices generated from three data sources in San Diego County, CA: U.S. Census‐based Longitudinal Employer–Household Dynamics Origin–Destination employment statistics, Twitter, and Instagram. The case study demonstrated that SpSSIM was able to capture similarities of mobility patterns between datasets that varied by distance. Some regions showed local dissimilarity while the global index indicated they were similar. The results enhance the understanding of complex mobility patterns from various datasets, including social media.     

MoisturEC: A New R Program for Moisture Content Estimation from Electrical Conductivity Data

Noninvasive geophysical estimation of soil moisture has potential to improve understanding of flow in the unsaturated zone for problems involving agricultural management, aquifer recharge, and optimization of landfill design and operations. In principle, several geophysical techniques (e.g., electrical resistivity, electromagnetic induction, and nuclear magnetic resonance) offer insight into soil moisture, but data‐analysis tools are needed to “translate” geophysical results into estimates of soil moisture, consistent with (1) the uncertainty of this translation and (2) direct measurements of moisture. Although geostatistical frameworks exist for this purpose, straightforward and user‐friendly tools are required to fully capitalize on the potential of geophysical information for soil‐moisture estimation. Here, we present MoisturEC, a simple R program with a graphical user interface to convert measurements or images of electrical conductivity (EC) to soil moisture. Input includes EC values, point moisture estimates, and definition of either Archie parameters (based on experimental or literature values) or empirical data of moisture vs. EC. The program produces two‐ and three‐dimensional images of moisture based on available EC and direct measurements of moisture, interpolating between measurement locations using a Tikhonov regularization approach.     

Application of Hilbert‐like transforms for enhanced processing of full tensor magnetic gradient data

Commonly, geomagnetic prospection is performed via scalar magnetometers that measure values of the total magnetic intensity. Recent developments of superconducting quantum interference devices have led to their integration in full tensor magnetic gradiometry systems consisting of planar‐type first‐order gradiometers and magnetometers fabricated in thin‐film technology. With these systems measuring directly the magnetic gradient tensor and field vector, a significantly higher magnetic and spatial resolution of the magnetic maps is yield than those produced via conventional magnetometers. In order to preserve the high data quality in this work, we develop a workflow containing all the necessary steps for generating the gradient tensor and field vector quantities from the raw measurement data up to their integration into high­resolution, low­noise, and artefactless two‐dimensional maps of the magnetic field vector. The gradient tensor components are processed by superposition of the balanced gradiometer signals and rotation into an Earth‐centred Earth‐fixed coordinate frame. As the magnetometers have sensitivity lower than that of gradiometers and the total magnetic intensity is not directly recorded, we employ Hilbert‐like transforms, e.g., integration of the gradient tensor components or the conversion of the total magnetic intensity derived by calibrated magnetometer readings to obtain these values. This can lead to a better interpretation of the measured magnetic anomalies of the Earth's magnetic field that is possible from scalar total magnetic intensity measurements. Our conclusions are drawn from the application of these algorithms on a survey acquired in South Africa containing full tensor magnetic gradiometry data.