Effects of bottom bracings on torsional dynamic characteristics of horizontally curved twin I-girder bridges with different curvatures

Curved twin I-girder bridges (CTIGBs) have low torsional stiffness that makes them vulnerable to dynamic loads.This study investigates the effects of bottom bracings on the torsional dynamic characteri...     

Temporal change of glaciers area and geomorphometric parameters in Parbati valley,Himachal Pradesh,India

Temporal change in the glacier coverage is analyzed for the period between 1962 and 2003 in Parbati valley, Himachal Pradesh. It is observed that the total glacier cover has been decreased by 17% ranging between 8 and 100% for individual glacier. The pattern of de-glaciation shows a high degree of shrinkage in outer zone of Parbati valley, while least shrinkage is observed in the inner valley. The present study is conducted to establish relationship between glacio-geomorphic parameters and glaciers shrinkage pattern to predict the future glacier cover in warming scenario. A systematic change is observed for glacio-geomorphic parameters associated with temporal change in glacier cover. It is observed that mean and minimum elevation, slope, relief and duration of insolation have changed substantially. Maximum elevation, plan/profile curvatures and aspect have shown less change from 1962 to 2003. A correlation matrix between glacio-geomorphic parameters for glaciers between 1962 and 2003 shows that the recent glaciers are much more controlled by terrain characteristics than that in the recent past.     

Effects of over-consolidation history on flow instability of clean and silty sands

Acta Geotechnica - This article presents an experimental program under the constant volume condition to investigate the influence of over-consolidation on flow instability of clean and silty sand...     

Utilization of ochre as an adsorbent to remove Pb(II) and Cu(II) from contaminated aqueous media

The ability of ochre to remove Pb(II) and Cu(II) from aqueous media has been studied by batch sorption studies varying the contact time, initial metal concentration, initial solution pH and temperature to understand the adsorption behaviour of these metals through adsorption kinetics and isotherms. The pH of the solution and the temperature controlled the adsorption of metal ions by ochre and rapid uptake occurred in the first 30 min of reaction. The kinetics of adsorption followed a pseudo-second-order rate equation (R ² > 0.99) and the isotherms are well described by the Freundlich model. Adsorption of metals onto ochre is endothermic in nature. Between the two metals, Pb(II) showed more preference towards the exchangeable sites on ochre than Cu(II). This study indicates that ochre is a very effective adsorbent in removing Pb(II) and Cu(II) from the aqueous environment with an adsorptive capacity of 0.996 and 0.628 mg g^?1 and removal efficiency of 99.68 and 62.80 %, respectively.     

Geology and Active Tectonics of the Lalmai Hills,Bangladesh–An Overview from Chittagong Tripura Fold Belt Perspective

The Lalmai Hills is a low amplitude anticline with significant variations in landforms, situated along the western fringe of the Chittagong-Tripura Fold Belt (CTFB) and immediate east of the Indo-Burmese deformation front. This fold belt of the Bengal Basin along with more easterly Indo-Burman Range (IBR) developed as a consequence of the oblique collision between Indian and Burmese plates. This neotectonic activity is still continuing and shaping the geomorphology of the area. This study is conducted based on the geomorphological observation of the topo maps and satellite images, and through reconnaissance field work. Stream length gradient index (SL Index) and Mountain front sinuosity (S_mf) reveals the relative status of tectonic activity. Anomalous SL index values confirm the position of the sympathetic minor faults and also relate to the local stratigraphy. A 2D structural model based on the seismic section reveals thrusts controlled wedge-shape upliftment of the central part as pop-up anticlinal structure. The western thrust is the direct result of the collision of the Indian and Burmese plates, and the eastern one is the back thrust of the western fault. Low S_mf value found in the western flank signifies recent tectonics and relatively high S_mf value in the eastern flank indicates that weathering intensity is relatively greater compared to western flank. Finally, the findings not only enhanced the understanding of geomorphic evolution and active tectonics of the Lalmai Hills area but also the overall tectonic and geomorphic evolution of the western most folded part of the CTFB.     

Characterizing site response in the Attock Basin,Pakistan, using microtremor measurement analysis

The Attock Basin is situated close to the northwest of Pakistan. Recent seismic event of October 2015 (7.5M_w) near the Pakistan Afghanistan border has proved that the area of interest is seismically active and triggered a series of aftershocks of magnitude even greater than 6.5M_w. This seismic activity has posed danger to the future of the people and infrastructure especially to the northwestern part of the country. Therefore, site response analysis is essential for estimating local site conditions in response to seismic events. Ambient noise recordings were made at 50 sites within urban and semi-urban settlements in the Attock Basin to analyze the site response of the small but densely populated basin. At each of these sites, the fundamental frequency of the soft sediments (f ₀), the amplitude (A ₀) of corresponding H/V spectral ratios, the thickness of soft sediment (H) lying over competent lithology, and the soil vulnerability index (K _g) were studied. Results were correlated with sparsely available borehole data to enhance the credibility of the study conducted for microzonation and predicting the site response to earthquake seismicity in the Attock Basin. The soil vulnerability index was found to range from moderate to high. Results clearly showed that the study area exhibits low to moderate fundamental frequency with greater soft sediment thicknesses distributed throughout the study area. Moreover, higher impedance contrasts were found at most of the sites within the central part of the Attock Basin, thus reflecting a moderate to high susceptibility of damage in those regions in response to seismic events.     

Surface complexation modeling for predicting solid phase arsenic concentrations in the sediments of the Mississippi River Valley alluvial aquifer, Arkansas, USA

The potential health impact of As in drinking water supply systems in the Mississippi River Valley alluvial aquifer in the state of Arkansas, USA is significant. In this context it is important to understand the occurrence, distribution and mobilization of As in the Mississippi River Valley alluvial aquifer. Application of surface complexation models (SCMs) to predict the sorption behavior of As and hydrous Fe oxides (HFO) in the laboratory has increased in the last decade. However, the application of SCMs to predict the sorption of As in natural sediments has not often been reported, and such applications are greatly constrained by the lack of site-specific model parameters. Attempts have been made to use SCMs considering a component additivity (CA) approach which accounts for relative abundances of pure phases in natural sediments, followed by the addition of SCM parameters individually for each phase. Although few reliable and internally consistent sorption databases related to HFO exist, the use of SCMs using laboratory-derived sorption databases to predict the mobility of As in natural sediments has increased. This study is an attempt to evaluate the ability of the SCMs using the geochemical code PHREEQC to predict solid phase As in the sediments of the Mississippi River Valley alluvial aquifer in Arkansas. The SCM option of the double-layer model (DLM) was simulated using ferrihydrite and goethite as sorbents quantified from chemical extractions, calculated surface-site densities, published surface properties, and published laboratory-derived sorption constants for the sorbents. The model results are satisfactory for shallow wells (10.6 m below ground surface), where the redox condition is relatively oxic or mildly suboxic. However, for the deep alluvial aquifer (21-36.6 m below ground surface) where the redox condition is suboxic to anoxic, the model results are unsatisfactory.     

Electronic waste: present status and future perspectives of sustainable management practices in Malaysia

The ever-increasing and rapidly growing volume of waste electrical and electronic equipment has become a serious threat to the environment in many countries. The inevitability of e-waste management and the development of a holistic system to deal with it has become an indispensable socio-economic and environmental issue for the sustainable development of Malaysia. However, no comprehensive research has yet been carried out, and only a few works in a discreet manner have been begun. In view of the above, and as a small endeavor towards achieving the country’s Vision 2020, this study explores the present status and future perspectives of the management of waste electrical and electronic equipment in Malaysia. This article presents an overview of e-waste management practices around the world, including the generation of e-waste, the implementation of management strategies, and collection and recovery activities in Malaysia. It also presents the corresponding responses adopted so far with respect to legislation and other infrastructural development. Finally, through the use of structured and semi-structured interviews, it reveals the barriers and challenges, as well as future perspectives and sustainability issues related to the e-waste management system in this fast developing country.     

Participatory Vulnerability Reduction (PVR): an urban community-based approach for earthquake management

Participation of local people during any disaster is enormous. They possess better knowledge and information about their own community than anyone else from the outside. This study proposes Participatory Vulnerability Reduction (PVR), a community-based approach for disaster management. The concept of PVR was applied to an urban community of Dhaka city (Ward no. 06 of Dhaka North City Corporation) which has been identified by the Comprehensive Disaster Management Programme as one of the most vulnerable areas of the city for earthquake. PVR consists three steps, and in each step, different participatory urban appraisal tools were used. In the first step, the community people assessed the earthquake vulnerability. It was found that some certain parts of the study area are highly vulnerable due to lack of accessibility to the critical facilities, inadequacy of open space, poor construction practice and unsuitable soil condition for building construction. This was followed by analyzing the root causes and effects of these problems. Structural fragility of the buildings, construction of settlements by filling the low-lying areas and development of slums beside taller buildings are the three major causes behind the above vulnerable issues. In the second step, capacity of the community was assessed in terms of resources and their organizational structure. In the final step, local people developed the strategies to overcome the vulnerability and a community-based organizational set up was proposed to coordinate the collective actions. Although developed in local context, application of PVR is not limited for earthquake and it can be replicated for other communities as well.