Impact of stratospheric variability on tropospheric climate change

An improved stratospheric representation has been included in simulations with the Hadley Centre HadGEM1 coupled ocean atmosphere model with natural and anthropogenic forcings for the period 1979–2003. An improved stratospheric ozone dataset is employed that includes natural variations in ozone as well as the usual anthropogenic trends. In addition, in a second set of simulations the quasi biennial oscillation (QBO) of stratospheric equatorial zonal wind is also imposed using a relaxation towards ERA-40 zonal wind values. The resulting impact on tropospheric variability and trends is described. We show that the modelled cooling rate at the tropopause is enhanced by the improved ozone dataset and this improvement is even more marked when the QBO is also included. The same applies to warming trends in the upper tropical troposphere which are slightly reduced. Our stratospheric improvements produce a significant increase of internal variability but no change in the positive trend of annual mean global mean near-surface temperature. Warming rates are increased significantly over a large portion of the Arctic Ocean. The improved stratospheric representation, especially the QBO relaxation, causes a substantial reduction in near-surface temperature and precipitation response to the El Chichón eruption, especially in the tropical region. The winter increase in the phase of the northern annular mode observed in the aftermath of the two major recent volcanic eruptions is partly captured, especially after the El Chichón eruption. The positive trend in the southern annular mode (SAM) is increased and becomes statistically significant which demonstrates that the observed increase in the SAM is largely subject to internal variability in the stratosphere. The possible inclusion in simulations for future assessments of full ozone chemistry and a gravity wave scheme to internally generate a QBO is discussed.     

National Civil Protection Organization and technical activities in the 2012 Emilia earthquakes (Italy)

On May 2012, a severe seismic sequence occurred in the central part of the Po Plain (Northern Italy). It was characterized by two main shocks displaying local magnitudes 5.9 (on May 20th) and 5.8 (on May 29th), respectively; the maximum observed intensity was VII–VIII on the MCS scale. The emergency response was coordinated as usual by the Department of Civil Protection (DPC), within the general framework provided by the components and operational structures of the National Civil Protection Service. In addition to the search and rescue and to the population assistance activities, many technical activities were carried out to support the civil protection management of the recovery phase. Among these, mentioning is deserved by: the acquisition and dissemination of the accelerometric data from the National Accelerometric Network and the Seismic Observatory of the Structures, owned and operated by DPC; the evaluation of the liquefaction phenomena; the damage and building safety assessment; the regulations for the seismic safety assessment of industrial buildings, aimed at a rapid re-establishment of the productive activities; the actions undertaken following the evaluations by the Grandi Rischi Commission on the possible evolution of the seismic sequence. All these aspects will be examined under a civil protection perspective.     

Discriminating the long distance dispersal of fine ash from sustained columns or near ground ash clouds: The example of the Pomici di Avellino eruption (Somma-Vesuvius,Italy)

Ash samples from tephra layers correlated with the Pomici di Avellino (Avellino Pumice) eruption of Somma-Vesuvius were collected in distal archives and their composition and particle morphology investigated in order to infer their behaviour of transportation and deposition. Differences in composition and particle morphologies were recognised for ash particles belonging to the magmatic Plinian and final phreatomagmatic phases of the eruption. The ash particles were dispersed in opposite directions during the two different phases of the eruption, and these directions are also different from that of coarse-grained fallout deposits. In particular, ash generated during magmatic phase and injected in the atmosphere to form a sustained column shows a prevailing SE dispersion, while ash particles generated during the final phreatomagmatic phase and carried by pyroclastic density currents show a general NW dispersion. These opposite dispersions indicate an ash dispersal influenced by both high and low atmosphere dynamics. In particular, the magmatic ash dispersal was first driven by stratospheric wind towards NE and then the falling particles encountered a variable wind field during their settling, which produced the observed preferential SE dispersal. The wind field encountered by the rising ash clouds that accompanied the pyroclastic density currents of the final phreatomagmatic phase was different with respect to that encountered by the magmatic ash, and produced a NW dispersal. These data demonstrate how ash transportation and deposition are greatly influenced by both high and low atmosphere dynamics. In particular, fine-grained particles transported in ash clouds of small-scale pyroclastic density currents may be dispersed over distances and cover areas comparable with those injected into the stratosphere by Plinian, sustained columns. This is a point not completely addressed by present day mitigation plans in case of renewal of activity at Somma-Vesuvius, and can yield important information also for other volcanoes potentially characterised by explosive activity.     

Weathering of granite in Antarctica: II. Thermal stress at the grain scale

Granular disintegration has long been recognized and referred to in weathering texts from all environments, including the Antarctic. Despite this universal identification and referral, few to no data exist regarding thermal conditions at this scale and causative mechanisms remain little more than conjecture. Here, as part of a larger weathering study, thermal data of individual grains (using infrared thermometry and ultra‐fine thermocouples) composing a coarse granite, as well as the thermal gradients in the outer 10 cm (using thermistors), were collected from a north‐facing exposure. Measurements were also made regarding the surface roughness of the rock. Based on recorded temperatures, the nature of the rock surface and the properties of the minerals, an argument is made for complex stress fields that lead to granular disintegration. Mineral to mineral temperature differences found to occur were, in part, due to the changing exposure to solar radiation through the day (and through seasons). Because the thermal conductivity and the coefficient of thermal expansion of quartz are not equal in all directions, coupled with the vagaries of heating, this leads to inter‐granular stresses. Although fracture toughness increases with a decrease in temperature, it is suggested that the tensile forces resulting from falling temperatures are able to exceed this and produce granular disassociation. The lack of equality with respect to crystal axis of both thermal conductivity and expansion in quartz further exacerbates the propensity to failure. Grain size and porosity also influence the thermal stresses and may help explain why some grains are held in place despite disassociation near the surface. While the data presented here appear to beg more questions than providing answers, they do provide a basis for better, more detailed studies of this important weathering scale. Copyright © 2007 John Wiley & Sons, Ltd.     

Response of the bacterial community to in situ bioremediation of organic-rich sediments

A field trial experiment was carried out to assess the potential of bioremediation for mobilisation of carbon in organic-rich sediments. Both bioaugmentation (bio-fixed microorganisms) and biostimulation (oxygen release compounds--ORC) protocols have been tested and the response of the bacterial community has been described to assess the baseline for bioremediation potential. Multifactorial ANOVA revealed that bioaugmentation protocol had an effect in stimulate mobilisation processes and significantly enhanced extra-cellular enzymatic activity rates. In contrast biostimulation treatment did not have an effect on mobilisation rates but contributed to enhance bacterial efficiency through a maximization of the bacterial production:enzymatic activity ratio. Average calculation of net mobilised carbon showed that 23% increase of mobilised pool was accounted for bioaugmentation in summer. Although biostimulation accounted for a smaller increase in mobilised carbon (<10%), the use of ORC resulted in an increased mineralisation and net carbon loss via respiration. Based on our results, a conceptual model for application of bioremediation to face the problem of sediment eutrophication is discussed.     

The 1631 Vesuvius eruption. A reconstruction based on historical and stratigraphical data

The eruption of 1631 A.D. was the most violent and destructive event in the recent history of Vesuvius. More than fifty primary documents, written in either Italian or Latin, were critically examined, with preference given to the authors who eyewitnessed volcanic phenomena. The eruption started at 7 a.m. on December 16 with the formation of an eruptive column and was followed by block and lapilli fallout east and northeast of the volcano until 6 p.m. of the same day. At 10 a.m. on December 17, several nuées ardentes were observed to issue from the central crater, rapidly descending the flanks of the cone and devastating the villages at the foot of Vesuvius. In the night between the 16th and 17th and on the afternoon of the 17th, extensive lahars and floods, resulting from rainstorms, struck the radial valleys of the volcano as well as the plain north and northeast.Deposits of the eruption were identified in about 70 localities on top of an ubiquitous paleosol formed during a long preeruptive volcanic quiescence. The main tephra unit consists of a plinian fallout composed of moderately vesicular dark green lapilli, crystals and lithics. Isopachs of the fallout are elongated eastwards and permit a conservative volume calculation of 0.07 km³. The peak mass flux deduced from clast dispersal models is estimated in the range 3–6 × 10⁷ kg/s, corresponding to a column height of 17–21 km. East of the volcano the plinian fallout is overlain by ash-rich low-grade ignimbrite, surges, phreatomagmatic ashes and mud flows. Ash flows occur in paleovalleys around the cone of Vesuvius but are lacking on the Somma side, suggesting that pyroclastic flows had not enough energy to overpass the caldera wall of Mt. Somma. Deposits are generally unconsolidated, massive with virtually no ground layer and occasionally bearing sparse rests of charred vegetation. Past interpretations of the products emitted on the morning of December 17 as lava flows are inconsistent with both field observations and historical data. Features of the final phreatomagmatic ashes are suggestive of alternating episodes of wet ash fallout and rainfalls. Lahars interfingered with primary ash fallout confirm episodes of massive remobilization of loose tephra by heavy rainfalls during the final stage of the eruption.Chemical analyses of scoria clasts suggest tapping of magma from a compositionally zoned reservoir. Leucite-bearing, tephritic-phonolite (SiO₂ 51.17%) erupted in the early plinian phase was in fact followed by darker and slightly more mafic magma richer in crystals (SiO₂ 49.36%). During the nuées ardentes phase the composition returned to that of the early phase of the eruption.The reconstruction of the 1631 eruptive scenario supplies new perspectives on the hazards related to plinian eruptions of Vesuvius.     

The gas/steam ratio as indicator of heat transfer at the Solfatara fumaroles,Phlegraean Fields (Italy)

A simple geochemical model of Solfatara, Phlegraean Fields (Italy), is proposed on the basis of gas composition and temperature at the surface.Data on the Solfatara fumaroles have been collected since 1979 within the framework of a geochemical monitoring for the surveillance of the Phlegraean volcanic system.Surface manifestations of Solfatara are likely to be fed through isoenthalpic expansion of dry steam, which separates from a geothermal liquid in an intensively fractured zone at about 236°C. This value is consistent both with gas composition and surface temperature.The gas/steam ratio appears to be the most effective parameter to detect changes of heat flow at depth.Actually a remarkable decrease in the gas/steam ratio has been observed since 1981, while the gas composition and the temperature did not change significantly. These facts suggest increased heat flow at depth.     

Shaking‐table tests on reinforced concrete frames with different isolation systems

The effectiveness of seismic isolation in protecting structural and non‐structural elements from damage has been assessed in an extensive programme of shaking‐table tests, carried out on four identical 1/3.3‐scale, two‐dimensional, reinforced concrete (R/C) frames. Four different isolation systems were considered, namely: (i) rubber‐based, (ii) steel‐based, (iii) shape memory alloy (SMA)‐based and (iv) hybrid, i.e. based on both SMA and steel components, isolation systems. This paper presents a comprehensive overview of the main results of the experimental tests on base‐isolated models, whose structural response is described through: (i) maximum base displacements; (ii) maximum interstorey drifts; (iii) maximum storey accelerations and (iv) maximum storey shear forces. The evolution of the fundamental frequency of vibration of the R/C frame during the tests is also described. The beneficial effects of using base isolation resulted in no or slight damage, under strong earthquakes, to both structural and non‐structural members, as well as to the internal content of the building. The comparison with the experimental results obtained in shaking‐table tests on similar fixed‐base models emphasizes these positive aspects. Finally, advantages and drawbacks related to the use of each isolation system are discussed in the paper. Copyright © 2006 John Wiley & Sons, Ltd.