Ground‐based InSAR reveals conduit pressurization pulses at Stromboli volcano

At Stromboli volcano (Southern Italy), only few minor precursors (gas output) have been identified for ‘major’ Strombolian explosions. We use ground‐based interferometric synthetic aperture radar (GBInSAR) technology to monitor the displacement rate of the summit area of Stromboli. We analysed the 2009–2011 period. The analysis of the displacement rate has been performed by dividing the summit zone monitored by the GBInSAR into three regions, corresponding to the edge of the crater area (1 and 2), and to the slope of the NE crater (3). Pulses of rapid expansion of sector 3, of variable duration and amplitude, appear in coincidence with periods of intense activity that include lava flows and major explosions. We associate this expansion with the pressurization of the magma column that is recharged by deep‐derived gas, promoting the onset of ‘major explosion‐dominated’ activity.     

Seasonal Blooms of the HAB Dinoflagellate Alexandrium taylori Balech in a New Mediterranean Area (Vulcano, Aeolian Islands)

Abstract. High-biomass blooms of A. taylori Balech have recently been spreading over new Mediterranean areas, with evident adverse effects on the marine ecosystem. In 1999–2000, a new Mediterranean locality was affected by blooms of A. taylori: the West Bay of Vulcano (Aeolian Islands, Tyrrhenian Sea), with maximum cell densities of 1.2 × 10⁷ cells 1⁻¹ in August 1999 and 4.0 × 10⁶ cells 1⁻¹ in August 2000 observed together with yellowish water discoloration. The seawater samples contained high concentrations of nutrients as DIN (Dissolved Inorganic Nitrogen), especially NH₃-N with values of 14.4 μM and TOT-P (Total Phosphorus) with values of 3.2 μM due to the anthropic presence and discharge of untreated sewage. The climatic conditions also seem to influence the occurrence and spreading of the A. taylori blooms in the Vulcano Bay. Clonal cultures of A. taylori , established from Italian and Spanish seawater samples, were used for the sequence analyses of the 5.8S rDNA gene and ITS regions in order to study the genetic variability of different geographical populations of Alexandrium species in the Mediterranean area and to further develop the molecular markers for HAB key-species.     

A review of the tectonic evolution of the Sunsás belt,SW Amazonian Craton

The Sunsás–Aguapeí province (1.20–0.95 Ga), SW Amazonian Craton, is a key area to study the heterogeneous effects of collisional events with Laurentia, which shows evidence of the Grenvillian and Sunsás orogens. The Sunsás orogen, characterized by an allochthonous collisional-type belt (1.11–1.00 Ga), is the youngest and southwesternmost of the events recorded along the cratonic fringe. Its evolution occurred after a period of long quiescence and erosion of the already cratonized provinces (>1.30 Ga), that led to sedimentation of the Sunsás and Vibosi groups in a passive margin setting. The passive margin stage was roughly contemporary with intraplate tectonics that produced the Nova Brasilândia proto-oceanic basin (<1.21 Ga), the reactivation of the Ji-Paraná shear zone network (1.18–1.12 Ga) and a system of aborted rifts that evolved to the Huanchaca–Aguapeí basin (1.17–1.15 Ga). The Sunsás belt is comprised by the metamorphosed Sunsás and Vibosi sequences, the Rincón del Tigre mafic–ultramafic sill and granitic intrusive suites. The latter rocks yield ε_Nd(t) signatures (?0.5 to ?4.5) and geochemistry (S, I, A-types) suggesting their origin associated with a continental arc setting. The Sunsás belt evolution is marked by “tectonic fronts” with sinistral offsets that was active from c. 1.08 to 1.05 Ga, along the southern edge of the Paraguá microcontinent where K/Ar ages (1.27–1.34 Ga) and the Huanchaca–Aguapeí flat-lying cover attest to the earliest tectonic stability at the time of the orogen. The Sunsás dynamics is coeval with inboard crustal shortening, transpression and magmatism in the Nova Brasilândia belt (1.13–1.00 Ga). Conversely, the Aguapeí aulacogen (0.96–0.91 Ga) and nearby shear zones (0.93–0.91 Ga) are the late tectonic offshoots over the cratonic margin. The post-tectonic to anorogenic stages took place after ca. 1.00 Ga, evidenced by the occurrences of intra-plate A-type granites, pegmatites, mafic dikes and sills, as well as of graben basins. Integrated interpretation of the available data related to the Sunsás orogen supports the idea that the main nucleus of Rodinia incorporated the terrains forming the SW corner of Amazonia and most of the Grenvillian margin, as a result of two independent collisional events, as indicated in the Amazon region by the Ji-Paraná shear zone event and the Sunsás belt, respectively.     

The Plinian phase of the Campanian Ignimbrite eruption (Phlegrean Fields,Italy): evidence from density measurements and textural characterization of pumice

Textural characterization of pumice clasts from explosive volcanic eruptions provides constraints on magmatic processes through the quantification of crystal and vesicle content, size, shape, vesicle wall thickness and the degree of interconnectivity. The Plinian fallout deposit directly underlying the Campanian Ignimbrite (CI) eruption represents a suitable case to investigate pumice products with different textural characteristics and to link the findings to processes accompanying conduit magma ascent to the crater. The deposit consists of a lower (LFU) and upper (UFU) pumice lapilli bed generated by the sub-steady eruption of trachytic magma with <5 vol%. crystals and a peak discharge rate of 3.2×10 ⁸ kg/s. Density measurements were performed on samples collected from different stratigraphic intervals at the Voscone-type outcrop, and their textural characteristics were investigated at different magnifications through image analysis techniques. According to clast densities, morphologies and vesicle textures pumice clasts were classified into microvesicular (heterogeneous vesicles), tube (elongated/deformed vesicles) and expanded (coalesced/inflated vesicles).The combination of density data and textural investigations allowed us to characterize both representative areas and textural extremes of pumice products. Bulk vesicularity spans a broad interval varying from 0.46 to >0.90, with vesicle number density ranging from 10 ⁷–10 ⁸ cm ^-3. The degree of vesicle coalescence is high for all pumice types, with interconnected vesicles generally representing more than 90% of the bulk vesicle population. The results show a high degree of heterogeneous textures among pumice clasts from both phases of the eruption and within each eruption phase, the different pumice types and also within each single pumice type fragment. The origin of pumice clasts with different textural characteristics is ascribed to the development of conduit regions marked by different rheological behavior. The conclusions of this study are that vesicle deformation, degree of coalescence and intense shear at the conduit walls play a major role on the degassing process, hence affecting the entire conduit dynamics.     

Uniform fragility spectra for the performance‐based seismic design of structures considering variabilities in structural properties

This paper presents a new methodology based on structural performance to determine uniform fragility design spectra, i.e., spectra with the same probability of exceedance of a performance level for a given seismic intensity. The design spectra calculated with this methodology provide directly the lateral strength, in terms of yield‐ pseudo‐accelerations, associated with the rate of exceedance of a specific ductility characterizing the performance level for which the structures will be designed. This procedure involves the assessment of the seismic hazard using a large enough number of seismic records of several magnitudes; these records are simulated with an improved empirical Green function method. The statistics of the performance of a single degree of freedom system are obtained using Monte Carlo simulation considering the seismic demand, the fundamental period, and the strength of the structure as uncertain variables. With these results, the conditional probability that a structure exceeds a specific performance level is obtained. The authors consider that the proposed procedure is a significant improvement to others considered in the literature and a useful research tool for the further development of uniform fragility spectra that can be used for the performance‐based seismic design and retrofit of structures.     

Applicability of pushover methods for the seismic analysis of single‐column bent viaducts

An overview of the applicability of a typical single‐mode pushover method (the N2 method) and two typical multi‐mode pushover methods (the modal pushover analysis (MPA) and incremental response spectrum analysis (IRSA) methods) for the analysis of single column bent viaducts in the transverse direction is presented. Previous research, which was limited to relatively short viaducts supported by few columns, has been extended to longer viaducts with more bents. The single‐mode N2 method is accurate enough for bridges where the effective modal mass of the fundamental mode is at least 80% of the total mass. The applicability of this method depends on (a) the ratio of the stiffness of the superstructure to that of the bents and (b) the strength of the bents. In short bridges with few columns, the accuracy of the N2 method increases as the seismic intensity increases, whereas in long viaducts (e.g. viaducts with lengths greater than 500 m) the method is in general less effective. In the case of the analyzed moderately irregular long viaducts, which are common in construction design practice, the MPA method performed well. For the analysis of bridges where the modes change significantly, depending on the seismic intensity, the IRSA method is in principle more appropriate, unless a viaduct is torsionally sensitive. In such cases, all simplified methods should be used with care. Copyright © 2008 John Wiley & Sons, Ltd.     

Sponge spicules indicate Holocene environmental changes on the Nabileque River floodplain, southern Pantanal, Brazil

Sponge spicules are siliceous microfossils that are especially useful for analysis of sandy fluvio-lacustrine sediments. Sponge spicules in a long sediment core (~550 cm below surface), consisting of fine sand, sandy silt, and organic-rich mud, recovered from the floodplain of the Nabileque River, southern Pantanal, Brazil (S20°16′38.3″/W57°33′00.0″), form the basis of a novel paleoenvironmental interpretation for this region. Optically stimulated luminescence dates constrain the timing of deposition to the middle-late Holocene and all spicules identified are typical of the Brazilian cerrado biome. The base of the section is dominated by Oncosclera navicella Carter 1881, Metania spinata Carter 1881, and Corvospongilla seckti Bonetto and Ezcurra de Drago 1966, which indicate a lotic to semi-lotic environment strongly influenced by an actively meandering river channel at ~6.7–5.7 ka BP. The appearance of Heterorotula fistula Volkmer-Ribeiro and Motta 1995, Dosilia pydanieli Volkmer-Ribeiro 1992 and Radiospongilla amazonensis Volkmer-Ribeiro and Maciel 1983 at ~340 cm downcore suggests a reduction in flowing water and a more stable lentic environment, consistent with deposition in an oxbow lake. This oxbow lake environment existed during an interval of regional aridity between ~4.5 and 3.9 ka BP. Spicules, as well as phytoliths and diatoms, are highly variable moving up-section, with species from both lotic and lentic ecosystems present. Above ~193 cm, the total abundance of spicules declines, consistent with wetter climate conditions and development of an underfit river similar to the modern floodplain. Results support hypotheses related to migration of the Paraguay River inferred from geomorphological studies and add a key southern-region dataset to the emerging Holocene database of paleoenvironmental records from the Pantanal wetlands.     

Modelling of fractured carbonate reservoirs: outline of a novel technique via a case study from the Molasse Basin, southern Bavaria, Germany

Fluid flow in low-permeable carbonate rocks depends on the density of fractures, their interconnectivity and on the formation of fault damage zones. The present-day stress field influences the aperture hence the transmissivity of fractures whereas paleostress fields are responsible for the formation of faults and fractures. In low-permeable reservoir rocks, fault zones belong to the major targets. Before drilling, an estimate for reservoir productivity of wells drilled into the damage zone of faults is therefore required. Due to limitations in available data, a characterization of such reservoirs usually relies on the use of numerical techniques. The requirements of these mathematical models encompass a full integration of the actual fault geometry, comprising the dimension of the fault damage zone and of the fault core, and the individual population with properties of fault zones in the hanging and foot wall and the host rock. The paper presents both the technical approach to develop such a model and the property definition of heterogeneous fault zones and host rock with respect to the current stress field. The case study describes a deep geothermal reservoir in the western central Molasse Basin in southern Bavaria, Germany. Results from numerical simulations indicate that the well productivity can be enhanced along compressional fault zones if the interconnectivity of fractures is lateral caused by crossing synthetic and antithetic fractures. The model allows a deeper understanding of production tests and reservoir properties of faulted rocks.     

UVB solar radiation climatology for Mexico

The measurement of solar B band Ultraviolet radiation (UVB) should be considered a priority in Mexico due to implications on public health throughout the country (total population, 108 million), but this is not carried out at present. Installed sensors cover only 0.12% of the country. However, there are alternative methods for estimating UVB radiation to overcome the lack of surface data. The most successful of these are based on the use of satellites for environmental monitoring. In the present work, UVB maps are constructed for the entire country using a single, daily satellite measurement of UVB at solar noon from 1978-2003. Satellite-derived values are compared with the ground measurements by a surface station located in Mexico City in order to validate the former. Wavelet spectrum analysis is employed to this end. A close correlation is observed between the two sets of data. Moreover, there is qualitative correspondence between the spatial distribution of the satellite-derived data and the surface topography. The difference resulting throughout the period mentioned is <2% of the average annual cumulative energy.