Observations on the biota of an estuarine beach at Hardys Bay (NSW, Australia) following a spillage of aldrin

An industrial accident resulted in a spillage of aldrin onto an estuarine beach at Hardys Bay, New South Wales. Samples of water and sediment were taken 3 weeks later to measure the level of contamination resulting from the spill. The abundances of some intertidal biota were also determined at the site of the spillage and in other uncontaminated areas.

Three weeks after the spill, samples of water were not contaminated by aldrin but samples of sediment from the surface in the vicinity of the drain contained aldrin. In comparison to uncontaminated locations the abundances of crustacea were greatly reduced in the vicinity of the drain but abundances of polychaetes were not significantly different. The field data on the relative susceptibility of the two groups of animals agrees well with laboratory derived LC50 data for crustacea and polychaetes.

The study suggests that degree of contamination of water and sediment may not always be an accurate reflection of acute impact on biota, and that different components of the biota can show different reactions to the presence of a toxic chemical.     

Engineering source model for strong ground motion

A new engineering source model consistent with seismological concepts for simulating strong-motion accelerograms (SMAs) is presented in this paper. The source region is modeled as a horizontally layered elastic medium to cater for site dependency. The moment field acting on the rupture plane is decomposed into space and time functions, which is a novel concept. The spatial and temporal components are determined for six well-recorded earthquakes using the corresponding recorded SMA. The obtained spatial variations indicate that they can be modeled as an anisotropic random field. The temporal components of all the six events are transients, with typical frequency spectra. Based on these results, a simplified source model is proposed for the synthesis of SMA during strong earthquakes. The model is validated by simulating strong-motion acceleration time histories at stations deliberately kept out of the modeling exercise. It is found that the present model is efficient in simulating observed time histories. The proposed model is also illustrated by simulating an ensemble of acceleration time histories for the Kutch earthquake of 26th January 2001 using only the few known source parameters.     

Geochemistry of surface sediments in tsunami-affected Sri Lankan lagoons regarding environmental implications

The December 26, 2004 Indian Ocean tsunami was one of the largest in human history, devastating the coastal wetlands of surrounding countries. This study present the chemical analyses of tsunamigenic and pre-tsunami sediments from Hikkaduwa and Hambantota lagoons in southern Sri Lanka, to assess their geochemical composition, their source, and subsequent environmental impacts. Principal component analysis of the tsunami sediments shows that 42% of the total variance is accounted for calcium oxide and Sr. That is, the tsunami deposits are rich in biogenic phases derived from shallow marine sediments. High organic matter contents of the tsunami sediments of up to 80 wt% also support this interpretation. The association of chlorine (<9.4 wt%), brome (<170?mg/kg), arsenic (<17?mg/kg), iron (III) oxide (<12.9 wt%) and sulfur (<7.6 wt%) accounts for 33% of the variance, reflecting higher salinity. This further suggests that the sediments were mainly derived from a marine environment, rather than from non-marine sands and/or soils. Immobile element contents and relations (thorium, scandium and zirconium) suggest that the tsunami sediment source was mostly felsic in composition, with some mafic component, and mixed with predominantly shallow marine shelf or slope sediments. Additional compositional variations in the tsunami sediments in both lagoons may be associated with variations of wave strength along the coast and by the morphology of the continental shelf. Lower elemental abundances in Hambantota lagoon sediments compared to Hikkaduwa equivalents may thus reflect a greater non-marine component in the former, and greater shelf sediment component in the latter.     

Geodynamics and underlying bedrock of the magnetically active crust layer of the Lut block,Eastern Iran

The Curie point depth map of Eastern Iran was constituted from spectral analysis of the aeromagnetic data. The reduction to pole (RTP) was applied to the magnetic anomaly data. The Curie point depth values from 165 overlapping blocks, 100 × 100 km in size, have been estimated. The Curie point depth method provides a relationship between the 2-D FFT power spectrum of the magnetic anomalies and the depth of magnetic sources by transforming the spatial data into the frequency domain. The centroid and top depth of the magnetic sources (respectively Z₀ and Z_t) is calculated from radially averaged log power spectrum for each block. Finally, the Curie point depth of Eastern Iran is obtained by Z_b = 2Z₀–Z_t. The highest value of 24 km is located in eastern and western boundaries of the Lut block, and the lowest value of 12 km is located at north of study area. The shallow depths in the Curie-point depth map are well correlated with the young volcanic areas and geothermal potential fields. Geothermal gradient ranging from 24 to 45°C/km. The deduced thermal structure in eastern Iran has a relationship with orogenic collapse associated with delamination of thickened lithospheric root between the Lut and Afghan continental blocks.     

Chemical spots on the surface of the strongly magnetic Herbig Ae star HD 101412

Due to the knowledge of the rotation period and the presence of a rather strong surface magnetic field, the sharp‐lined young Herbig Ae star HD 101412 with a rotation period of 42 d has become one of the most well‐studied targets among the Herbig Ae stars. High‐resolution HARPS polarimetric spectra of HD 101412 were recently obtained on seven different epochs. Our study of the spectral variability over the part of the rotation cycle covered by HARPS observations reveals that the line profiles of the elements Mg, Si, Ca, Ti, Cr, Mn, Fe, and Sr are clearly variable while He exhibits variability that is opposite to the behaviour of the other elements studied. Since classical Ap stars usually show a relationship between the magnetic field geometry and the distribution of element spots, we used in our magnetic field measurements different line samples belonging to the three elements with the most numerous spectral lines, Ti, Cr, and Fe. Over the time interval covered by the available spectra, the longitudinal magnetic field changes sign from negative to positive polarity. The distribution of field values obtained using Ti, Cr, and Fe lines is, however, completely different compared to the magnetic field values determined in previous low‐resolution FORS 2 measurements, where hydrogen Balmer lines are the main contributors to the magnetic field measurements, indicating the presence of concentration of the studied iron‐peak elements in the region of the magnetic equator. Further, we discuss the potential role of contamination by the surrounding warm circumstellar matter in the appearance of Zeeman features obtained using Ti lines. (© 2016 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Analysis of geomagnetic field along seismic profile P4 of the International Project POLONAISE'97

This paper presents relative secular variations of the total intensity of the geomagnetic field against a background of results of magnetic anomaly interpretation along seismic profile P4. Profile P4 crosses a Variscan folding zone in the Paleozoic Platform (PLZ), the Trans-European Suture Zone (TESZ), and the Polish part of the East European Craton (EEC). Secular geomagnetic field variations measured in 1966–2000 along a line adjacent to seismic profile P4 were analysed. The study of secular variations, reduced to the base recordings at the Belsk Magnetic Observatory, showed that the growth of geomagnetic field at the East European Craton was slower than in the Trans-European Suture Zone and the Paleozoic Platform.A 2D crustal magnetic model was interpreted as a result of magnetic modelling, in which seismic, geological and geothermal data were also used. The modelling showed that there were significant differences in the magnetic model for geotectonic units, which had been earlier determined based on deep seismic survey data. It should be noted that a fundamental change of trend of the relative secular variations was observed at the slope of the Precambrian Platform. After analysing the geomagnetic field observed along profile P4, the hypothesis that the contact between Phanerozoic and Precambrian Europe lies in Poland's territory can be proven.     

The hydrothermal system of Mendeleev Volcano,Kunashir Island,Kuril Islands: The geochemistry and the transport of magmatic components

This paper reports a detailed geochemical study of thermal occurrences as observed in the edifice and on the flanks of Mendeleev Volcano, Kunashir Island in August and September 2015. We showed that three main types of thermal water are discharged there (neutral chloride sodium, acid chloride sulfate, and acid sulfate types); these waters exhibit a zonality that is typical of volcano-hydrothermal island arc systems. Spontaneous and solfataric gases have relatively low ³He/⁴He ratios, ranging between 5.4Ra and 5.6Ra, and δ¹³C-CO₂ between –4.8‰ and –3.1‰, and contain a light isotope of carbon in methane (δ¹³C ≈ –40‰). Gas and isotope geothermometers yield relatively low temperatures around 200°C. The isotope compositions in all types of water are similar to that of local meteoric water. The distribution of microcomponents varies among different types. The isotope composition of dissolved Sr varies considerably, from 0.7034 as observed in Kunashir rocks on an average to 0.7052 in coastal springs, which may have resulted from admixtures of seawater. The total hydrothermal transport rates of magmatic Cl and SO₄, as observed for Mendeleev Volcano, are 7.8 t/d and 11.6 t/d, respectively. The natural outward transport of heat by the volcano’s hydrothermal system is estimated as 21 MW.     

Strain accumulation in sand due to cyclic loading: drained triaxial tests

Our aim is the prediction of the accumulation of strain and/or stress under cyclic loading with many (thousands to millions) cycles and relatively small amplitudes. A high-cycle constitutive model is used for this purpose. Its formulas are based on numerous cyclic tests. This paper describes drained tests with triaxial compression and uniaxial stress cycles. The influence of the strain amplitude, the average stress, the density, the cyclic preloading history and the grain size distribution on the direction and the intensity of strain accumulation is discussed.