Near-field tsunami amplification factors in the Kii Peninsula,Japan for Dense Oceanfloor Network for Earthquakes and Tsunamis (DONET)

We investigated the correlation between coastal and offshore tsunami heights by using data from the Dense Oceanfloor Network for Earthquakes and Tsunamis (DONET) observational array of ocean-bottom pressure gauges in the Nankai trough off the Kii Peninsula, Japan. For near-field earthquakes, hydrostatic pressure changes may not accurately indicate sea surface fluctuations, because ocean-bottom pressure gauges are simultaneously displaced by crustal deformation due to faulting. To avoid this problem, we focused on the average waveform of the absolute value of the hydrostatic pressure changes recorded at all the DONET stations during a tsunami. We conducted a Monte Carlo tsunami simulation that revealed a clear relationship between the average waveforms of DONET and tsunami heights at the coast. This result indicates the possibility of accurate real-time prediction of tsunamis by use of arrays of ocean-bottom pressure gauges.     

Cross-Validation of Open-Path and Closed-Path Eddy-Covariance Techniques for Observing Methane Fluxes

Methane ( ${\mathrm {CH}}_{4}$ ) fluxes observed with the eddy-covariance technique using an open-path ${\mathrm {CH}}_{4}$ analyzer and a closed-path ${\mathrm {CH}}_{4}$ analyzer in a rice paddy field were evaluated with an emphasis on the flux correction methodology. A comparison of the fluxes obtained by the analyzers revealed that both the open-path and closed-path techniques were reliable, provided that appropriate corrections were applied. For the open-path approach, the influence of fluctuations in air density and the line shape variation in laser absorption spectroscopy (hereafter, spectroscopic effect) was significant, and the relative importance of these corrections would increase when observing small ${\mathrm {CH}}_{4}$ fluxes. A new procedure proposed by Li-Cor Inc. enabled us to accurately adjust for these effects. The high-frequency loss of the open-path ${\mathrm {CH}}_{4}$ analyzer was relatively large (11 % of the uncorrected covariance) at an observation height of 2.5 m above the canopy owing to its longer physical path length, and this correction should be carefully applied before correcting for the influence of fluctuations in air density and the spectroscopic effect. Uncorrected ${\mathrm {CH}}_{4}$ fluxes observed with the closed-path analyzer were substantially underestimated (37 %) due to high-frequency loss because an undersized pump was used in the observation. Both the bandpass and transfer function approaches successfully corrected this flux loss. Careful determination of the bandpass frequency range or the transfer function and the cospectral model is required for the accurate calculation of ${\mathrm {CH}}_{4}$ fluxes with the closed-path technique.     

Statistical downscaling of sea-surface wind over the Peru�CChile upwelling region: diagnosing the impact of climate change from the IPSL-CM4 model

The key aspect of the ocean circulation off Peru?CChile is the wind-driven upwelling of deep, cold, nutrient-rich waters that promote a rich marine ecosystem. It has been suggested that global warming may be associated with an intensification of upwelling-favorable winds. However, the lack of high-resolution long-term observations has been a limitation for a quantitative analysis of this process. In this study, we use a statistical downscaling method to assess the regional impact of climate change on the sea-surface wind over the Peru?CChile upwelling region as simulated by the global coupled general circulation model IPSL-CM4. Taking advantage of the high-resolution QuikSCAT wind product and of the NCEP reanalysis data, a statistical model based on multiple linear regressions is built for the daily mean meridional and zonal wind at 10?m for the period 2000?C2008. The large-scale 10?m wind components and sea level pressure are used as regional circulation predictors. The skill of the downscaling method is assessed by comparing with the surface wind derived from the ERS satellite measurements, with in situ wind observations collected by ICOADS and through cross-validation. It is then applied to the outputs of the IPSL-CM4 model over stabilized periods of the pre-industrial, 2?×?CO₂ and 4?×?CO₂ IPCC climate scenarios. The results indicate that surface along-shore winds off central Chile (off central Peru) experience a significant intensification (weakening) during Austral winter (summer) in warmer climates. This is associated with a general decrease in intra-seasonal variability.     

Characterization of polychlorinated biphenyls and brominated flame retardants in sediments from riverine and coastal waters of Surabaya, Indonesia

A total of 33 surficial sediments from riverine and coastal waters from Surabaya, Indonesia were analyzed for PCBs and BFRs. Concentrations of PCBs (62 congeners), PBDEs (14 congeners) and HBCDs (3 isomers) varied from <DL-420, <DL-35 and <DL-5.4 ng g⁻¹ dw, respectively. Higher concentrations of these compounds were found in riverine than coastal sediments. Their levels and distribution were influenced by proximity to the point sources and TOC. The predominant congeners were CB-153, -28, -138, -149, -180, -33 and BDE-209, -207, -206, -197, -196, -183, -99, -47 for PCBs and PBDEs, respectively, and γ-isomer for HBCDs. Debromination of BDE-209 might be taking place producing lower toxic congeners in sediment. Levels of PCBs in riverine sediments were comparable with some polluted areas worldwide, but PBDEs and HBCDs were lower. Hazard assessment of PCBs indicated possible toxic potential, particularly in areas close to point sources.     

Phytoremediation of heavy metal‐contaminated water and sediment by Eleocharis acicularis

Phytoremediation is an environmental remediation technique that takes advantage of plant physiology and metabolism. The unique property of heavy metal hyperaccumulation by the macrophyte Eleocharis acicularis is of great significance in the phytoremediation of water and sediments contaminated by heavy metals at mine sites. In this study, a field cultivation experiment was performed to examine the applicability of E. acicularis to the remediation of water contaminated by heavy metals. The highest concentrations of heavy metals in the shoots of E. acicularis were 20 200 mg Cu/kg, 14 200 mg Zn/kg, 1740 mg As/kg, 894 mg Pb/kg, and 239 mg Cd/kg. The concentrations of Cu, Zn, As, Cd, and Pb in the shoots correlate with their concentrations in the soil in a log‐linear fashion. The bioconcentration factor for these elements decreases log‐linearly with increasing concentration in the soil. The results indicate the ability of E. acicularis to hyperaccumulate Cu, Zn, As, and Cd under natural conditions, making it a good candidate species for the phytoremediation of water contaminated by heavy metals.     

Broadband Ground Motion Reconstruction for the Kanto Basin during the 1923 Kanto Earthquake

Ground motions of the 1923 Kanto Earthquake inside the Kanto Basin are numerically simulated in a wide frequency range (0?C10?Hz) based on new knowledge of the earthquake??s source processes, the sedimentary structure of the basin, and techniques for generating broadband source models of great earthquakes. The Kanto Earthquake remains one of the most important exemplars for ground motion prediction in Japan due to its size, faulting geometry, and location beneath the densely populated Kanto sedimentary basin. We reconstruct a broadband source model of the 1923 Kanto Earthquake from inversion results by introducing small-scale heterogeneities. The corresponding ground motions are simulated using a hybrid technique comprising the following four calculations: (1) low-frequency ground motion of the engineering basement, modeled using a finite difference method; (2) high-frequency ground motion of the engineering basement, modeled using a stochastic Green??s function method; (3) total ground motion of the engineering basement (i.e. 1?+?2); and (4) ground motion at the surface in response to the total basement ground motion. We employ a recently developed three-dimensional (3D) velocity structure model of the Kanto Basin that incorporates prospecting data, microtremor observations and measurements derived from strong ground motion records. Our calculations reveal peak ground velocities (PGV) exceeding 50?cm/s in the area above the fault plane: to the south, where the fault plane is shallowest, PGV reaches 150?C200?cm/s at the engineering basement and 200?C250?cm/s at the surface. Intensity 7, the maximum value in the Japan Meteorological Agency??s intensity scale, is calculated to have occurred widely in Sagami Bay, which corresponds well with observed house-collapse rates due to the 1923 event. The modeling reveals a pronounced forward directivity effect for the area lying above the southern, shallow part of the fault plane. The high PGV and intensity seen above the southeastern corner of the fault plane and further east are largely due to this effect. Waveforms above the fault plane contain both short- and long-period components, but the short-period components are not observed further afield. Away from the fault, long-period waves (>2?s) dominate the ground motion, and in areas where the base of the third layer is relatively deep, the predominant period is >5?s. Levels of long-period ground motion in the southern part of the study area, around Sagami Bay and the southern parts of Boso Peninsula and Tokyo Bay, exceed that recorded at Tomakomai during the 2003 Tokachi-oki earthquake, when large oil storage tanks collapsed in response to sloshing generated by strong long-period motions.     

Hayabusa‐returned sample curation in the Planetary Material Sample Curation Facility of JAXA

Abstract– The Planetary Material Sample Curation Facility of JAXA (PMSCF/JAXA) was established in Sagamihara, Kanagawa, Japan, to curate planetary material samples returned from space in conditions of minimum terrestrial contaminants. The performances for the curation of Hayabusa‐returned samples had been checked with a series of comprehensive tests and rehearsals. After the Hayabusa spacecraft had accomplished a round‐trip flight to asteroid 25143 Itokawa and returned its reentry capsule to the Earth in June 2010, the reentry capsule was brought back to the PMSCF/JAXA and was put to a series of processes to extract recovered samples from Itokawa. The particles recovered from the sample catcher were analyzed by electron microscope, given their ID, grouped into four categories, and preserved in dimples on quartz slide glasses. Some fraction of them has been distributed for initial analyses at NASA, and will be distributed for international announcement of opportunity (AO), but a certain fraction of them will be preserved in vacuum for future analyses.     

Investigation of cutting methods for small samples of Hayabusa and future sample return missions

We report the investigation of cutting methods for Hayabusa samples. The purpose of our study is to explore the possibility of applying multiple analyses to a single particle effectively. We investigated the cutting performance of a blade dicing saw, laser, focused ion beam (FIB), and physical breaking by microindenter. Cutting performance was examined by estimating the aspect ratio of the cut slit, i.e., depth over width of the slit. We also investigated the possible contamination and sample damage by cutting. The result of the investigation shows that we can cut the samples from <50 μm to 500 μm using those methods with aspect ratios from 10 to 20, although they would introduce some contamination or damage to the samples. Our investigations also provide an important basis for the analysis of samples obtained by future sample return missions.