The δ18O in the Guliya shallow ice core during the prevailing summer monsoons and sea-air interactions

The correlations of the δ¹⁸O_max in the shallow ice core from the Guliya ice cap on the Tibetan Plateau with the global sea surface temperatures (SST) and height at the 500 hPa over the Northern Hemisphere were analyzed. The correlated regions on oceans that have a significant influence on the δ¹⁸O_max in the Guliya ice core are all located in ocean currents, or convergent regions of currents. They are the eastern Equatorial Pacific, the Northern Pacific Current, the Hot Pool in the eastern Indian Ocean, the Mozambique Current, the Northern Atlantic Current, the Canary Current and the Atlantic Equatorial Current. The δ¹⁸O_max in the Guliya ice core has negative correlations with the SST located in the lower latitudes, and positive correlations with the SST in the middle latitudes. The correlated areas at the 500 hPa that have a great impact on the δ¹⁸O_max are located in the subtropical highs over the mid-low-latitude oceans and the long-wave trough area over Balkhash Lake, where there are marked negative correlations between the heights in those areas and the δ¹⁸O_max. The influencing mechanism is displayed by the diversity of the vapor origins transported to the Guliya region. The strengths of the European ridge and the ridge over Baikal Lake have notable positive correlations with the δ¹⁸O_max. The two systems indirectly influence the vapor transportation towards the Guliya region by the adjustment of long-wave trough and ridge.     

A 60-year record of rainfall from the sediments of Jinheung Pond,Jeongeup, Korea

This paper describes mean grain-size data from the ¹³⁷Cs- and ²¹⁰Pb-dated sediment core BS-3 (33-cm long) recovered from Jinheung Pond, located in the southwestern part of the Korean Peninsula. Grain-size analysis of the Jinheung Pond sediments shows a clear signal for changes in annual precipitation over the past 60 years. Instrumental records of annual precipitation (AP) and the annual summation of the precipitation of >50 mm per day (AP50), which reflects the energy available for sediment transport, correlate well with the mean grain-size distributions measured in the core. The most plausible mechanism for this response in mean grain size is variations in the annual amount and intensity of precipitation. Heavy precipitation enhances soil erosion over the catchment area and increases the transport capacity of streams and rivers. Thus, coarser mean grain size should reflect higher precipitation, and smaller mean grain size should reflect lower rainfall. In the data from core BS-3, however, grain-size peaks attributed to increased annual precipitation are not prominent. This is because a dam prevents removal of fine particles from the pond via the outflow. Therefore, the mean grain-size value represents somewhat larger sediments together with fine clays. The results of this study show that sediments of dammed lakes and ponds are well suited for high-resolution environmental investigations, especially for records of changes in precipitation over time.     

Newly-generated Daliangshan Fault Zone—Shortcutting on the central section of Xianshuihe-Xiaojiang fault system

The Daliangshan fault zone is the eastern branch in the central section of Xianshuihe-Xiaojiang fault system. It has been neglected for a long time, partly because of no destructive earthquake records along this fault zone. On the other hand, it is located on the remote and inaccessible plateau. So far it was excluded as part of the Xianshuihe-Xiaojiang fault system. Based on the interpretation of aerophotographs and field investigations, we document this fault zone in detail, and give an estimation of strike-slip rate about 3 mm/a in Late Quaternary together with age dating data. The results suggest that the Daliangshan fault zone is a newly-generated fault zone resulted from shortcutting in the central section of Xianshuihe-Xiaojiang fault system because of the clockwise rotation of the Southeastern Tibetan Crustal Block, which is bounded by the Xianshuihe-Xiaojiang fault system. Moreover, the shortcutting may make the Daliangshan fault zone replace the Anninghe and Zemuhe fault zones gradually, and finally, the later two fault zones will probably die out with the continuous clockwise rotation.     

The in the Guliya shallow ice core during the prevailing summer monsoons and sea-air interactions

The correlations of the δ18Omax in the shallow ice core from the Guliya ice cap on the Tibetan Plateau with the global sea surface temperatures (SST) and height at the 500 hPa over the Northern Hemisphere were analyzed. The correlated regions on oceans that have a significant influence on the δ18Omax in the Guliya ice core are all located in ocean currents, or convergent regions of currents. They are the eastern Equatorial Pacific, the Northern Pacific Current, the Hot Pool in the eastern Indian Ocean, the Mozambique Current, the Northern Atlantic Current, the Canary Current and the Atlantic Equatorial Current. The δ18Omax in the Guliya ice core has negative correlations with the SST located in the lower latitudes, and positive correlations with the SST in the middle latitudes. The correlated areas at the 500 hPa that have a great impact on the δ8Omax are located in the subtropical highs over the mid-low-latitude oceans and the long-wave trough area over Balkhash Lake, where there are marked negative correlations between the heights in those areas and the δ18Omax. The influencing mechanism is displayed by the diversity of the vapor origins transported to the Guliya region. The strengths of the European ridge and the ridge over Baikal Lake have notable positive correlations with the 8180max. The two systems indirectly influence the vapor transportation towards the Guliya region by the adjustment of long-wave trough and ridge.     

Uranium and Thorium Isotope Distribution in an Offshore Bottom Sediment Core of the Selenga Delta, Lake Baikal, Siberia

Distribution of uranium and thorium isotopes in a short sediment core obtained offshore of the Selenga Delta in Lake Baikal, Siberia, was investigated to establish their sedimentary behaviors and to look for a linkage to paleoenvironmental changes. The sediments were composed of dominantly fine detrital materials (70–85%) and a relatively high sedimentation rate (ca. 0.03 cm y⁻¹). The depth profile of ²³⁸U content in bulk sediment samples showed a large variation of 70–123 Bq kg⁻¹, while ²³²Th profile showed a relatively narrow range from 36 to 56 Bq kg⁻¹. The observed ²³⁴U/²³⁸U activity ratios revealed a marked disequilibrium ranging from 1.53 to 1.84 with a mean value of 1.71 ± 0.07, demonstrating the presence of 50–80% authigenic ²³⁸U in the bulk sediments. The distribution of this authigenic ²³⁸U did not display any clear correlation with variations in sediment composition (organic, carbonate, Bio-SiO₂ and mineral contents) including grain size median. The profile of terrigenous ²³⁸U showed a relatively similar pattern to that of ²³²Th. Results of sequential leaching indicate that ²³⁸U in Fe–Mn oxyhydroxides fractions were responsible for the distribution of authigenic ²³⁸U rather than in Bio-SiO₂ fraction. The distribution of authigenic ²³⁸U in the bottom sediments may be explained by the fluctuation of U adsorption capacity on particles including organic matter and Fe–Mn oxyhydroxides before they entered the lake. This study highlights the potential use of authigenic and terrigenous U (Th) signatures in sediments to trace the behavior of U (Th) and to reconstruct environmental (e.g., hydrological) changes in the lake catchment area.     

The δ~(18)O in the Guliya shallow ice core during the prevailing summer monsoons and sea-air interactions

1 Introduction The Tibetan Plateau is gigantic in extent and has the highest elevation and the most complex topography in the world. Its existence is of important significance for the formation of atmospheric circulation, weather and climate in China, much of Asia and even of the globe. Therefore, great attention is given to it. The analyses show that the influencing range of the Tibetan Plateau is the widest during the summer[1]. The powerful updrafts from the plateau warm low flow towar…     

The δ18O in the Guliya shallow ice core during the prevailing summer monsoons and sea-air interactions

The correlations of the δ18Omax in the shallow ice core from the Guliya ice cap on the Tibetan Plateau with the global sea surface temperatures (SST) and height at the 500 hPa over the Northern Hemisphere were analyzed. The correlated regions on oceans that have a significant influence on the δ18Omax in the Guliya ice core are all located in ocean currents, or convergent regions of currents. They are the eastern Equatorial Pacific, the Northern Pacific Current, the Hot Pool in the eastern Indian Ocean, the Mozambique Current, the Northern Atlantic Current, the Canary Current and the Atlantic Equatorial Current. The δ18Omax in the Guliya ice core has negative correlations with the SST located in the lower latitudes, and positive correlations with the SST in the middle latitudes. The correlated areas at the 500 hPa that have a great impact on the δ18Omax are located in the subtropical highs over the mid-low-latitude oceans and the long-wave trough area over Balkhash Lake, where there are marked negative correlations between the heights in those areas and the δ18Omax. The influencing mechanism is displayed by the diversity of the vapor origins transported to the Guliya region. The strengths of the European ridge and the ridge over Baikal Lake have notable positive correlations with the δ18Omax. The two systems indirectly influence the vapor transportation towards the Guliya region by the adjustment of long-wave trough and ridge.     

Some instabilities in the 3/1 and 2/1 resonances

In a very simple way, it is possible to show the existence of small regions of instability, inside the observed 3/1 and 2/1 Kirkwood Gap, by using the classical Laplace-Lagrange secular theory.     

Interaction between cladding and structural frame observed in a full‐scale steel building test

Interaction between the external wall cladding and the seismic load resisting frame was examined in a full‐scale cyclic loading test of a three‐storey steel building structure. The building specimen had Autoclaved Lightweight Concrete (ALC, also designated as Autoclaved Aerated Concrete) panels installed and anchored to the structural frame as external wall cladding, using a standard Japanese method developed following the 1995 Kobe earthquake. ALC panelling is among the most widely used material for claddings in Japan. In the test, the ALC panel cladding contributed little to the stiffness and strength of the overall structure, even under a very large storey drift of 0.04 rad. No visible damage was noted in the ALC panels other than minor cracks and spalling of the bottom of the panels in the first storey. Consequently, in a Japanese steel building with properly installed ALC panel cladding, the structural frame is likely to be little affected by its cladding, and the ALC panels are capable of accommodating the maximum storey drift generally considered in structural design without sustaining discernible damage. Copyright © 2006 John Wiley & Sons, Ltd.     

LQR control with frequency‐dependent scheduled gain for a semi‐active floor isolation system

Floor isolation is an alternative to base isolation for protecting a specific group of equipment installed on a single floor or room in a fixed‐base structure. The acceleration of the isolated floor should be mitigated to protect the equipment, and the displacement needs to be suppressed, especially under long‐period motions, to save more space for the floor to place equipment. To design floor isolation systems that reduce acceleration and displacement for both short‐period and long‐period motions, semi‐active control with a newly proposed method using the linear quadratic regulator (LQR) control with frequency‐dependent scheduled gain (LQRSG) is adopted. The LQRSG method is developed to account for the frequency characteristics of the input motion. It updates the control gain calculated by the LQR control based on the relationship between the control gain and dominant frequency of the input motion. The dominant frequency is detected in real time using a window method. To verify the effectiveness of the LQRSG method, a series of shake table tests is performed for a semi‐active floor isolation system with rolling pendulum isolators and a magnetic‐rheological damper. The test results show that the LQRSG method is significantly more effective than the LQR control over a range of short‐period and long‐period motions. Copyright © 2013 John Wiley & Sons, Ltd.