Effect of temperature on the methyl chloride production rate in a marine phytoplankton, <Emphasis Type="Italic">Phaeodactylum tricornutum</Emphasis>

Methyl halides such as methyl chloride (CH₃Cl) are known to be important carriers of halogen from the ocean to the atmosphere, and the halogens they release into the stratosphere by photolysis catalyze ozone depletion. Marine phytoplankton have been reported as a source of CH₃Cl, but the effects of environmental temperature on the CH₃Cl production by phytoplankton have not been investigated. In this study, we investigated the effects of temperature on the production of CH₃Cl in the culture of a marine diatom, Phaeodactylum tricornutum CCMP 630, incubated at 10, 15, 20, 25, and 30 °C. CH₃Cl concentrations in cultured samples were determined using purge and trap gas chromatograph–mass spectrometry. Phytoplankton growth was monitored by measuring the chlorophyll a concentrations. CH₃Cl production was observed for several weeks at four different temperatures ranging from 10 to 25 °C. The CH₃Cl production from P. tricornutum was increased with increasing temperature from 10 to 25 °C, and the maximum production rate for CH₃Cl was 0.21~0.26 μmol (g chlorophyll a)^?1 d^?1 at 25 °C, which was several times higher than that at 10 °C (~0.03 μmol (g chlorophyll a)^?1 d^?1). The Arrhenius equation was successfully used to characterize the effects of temperature on the production rates of CH₃Cl in the culture of P. tricornutum. Our results suggest that water temperature directly affects CH₃Cl production derived from P. tricornutum and that water temperature would be a significant factor for estimating the emissions of CH₃Cl from marine environments.     

Measurement of the sea surface emissivity

The sea surface emissivity in the infrared region is determined on the basis of data analyses. Net radiation, surface irradiance and other oceanographical and meteorological variables are measured throughout most of the year at the oceanographical observatory tower in Tanabe Bay, Japan. We have found that 0.984±0.004 is a reliable emissivity value from the night time data. Surface emission radiates not from the subsurface water but from the sea surface. The thermal skin layer on the sea surface, however, is disturbed and disappears under high wind speed over 5 m/s through the analyses of the radiation observation using the emissivity value of 0.984. Under low wind speed, the sea surface can be cooler or warmer than the subsurface due to overlying thermal conditions and the skin layer can be neutral as the transient process between them. By using an emissivity value of 0.984, the temperature difference between the sea surface temperature and the temperature determined from surface irradiance that has been reported in the satellite data analyses is found to be reduced by half.     

Respiration rates of planktonic crustaceans from the Inland Sea of Japan with special reference to the effects of body weight and temperature

A total of 293 measurements of respiration rate were made on planktonic crustaceans collected in different seasons from the Inland Sea of Japan. The relationship between the rate of oxygen consumption (R,μl O₂ indiv.⁻¹ hr⁻¹) and body dry weight (W, mg indiv.⁻¹), as expressed by a power function (R=aW ^b , or logR=loga+b logW), was established as a function of temperature (T, °C). The slope of the regression equation (b) was not significantly affected by seasonal temperature variation, but the intercept of the equation (loga) was strongly influenced by temperature. The equation describing this general relation is logR=(0.0444T−0.333)+0.713 logW.     

The Kiryu Experimental Watershed: 50-years of rainfall-runoff data for a forest catchment in central Japan

The Kiryu Experimental Catchment (KEW) is a small (5.99 ha) forest catchment located in Shiga Prefecture, central Japan (34°58′ N, 136°00′ E; www.bluemoon.kais.kyoto-u.ac.jp/kiryu/contents.html ). Around this area, forest devastation occurred from ca. 1250 to ca. 150 years ago because of overuse of forest and timbers. Then, hillside forestation was carried out for more than 100 years to prevent soil erosion and support the timber industry, and consequently, most of this area is now covered with plantation forests mainly by Chamaecyparis obtusa Sieb. et Zucc. (Japanese cypress) planted around 1960's. This plantation forest is not actively managed. The KEW is one of the leading experimental forests with long-term monitoring data in Japan. Research in the KEW began in 1967 to elucidate the hydrological and biogeochemical processes in the forested catchment in relation to climate, geology, soil, and vegetation growth. Since then, the long-term hydrological data of precipitation, runoff and sediment transport are continuously monitoring. In this study, we provide the data and preliminarily discuss the rainfall–runoff patterns and sediment transport through 50 years in the KEW. The annual precipitation and the maximum daily rainfall have been greater than the average over the last decade. In response to the rainfall patterns, the ratio of annual direct runoff to precipitation was also larger in the last decade. The sediment transport in this decade was consequently larger than the preceding decades. Our data presented here suggest that a close relationship exists between the climate condition, rainfall–runoff response, sediment dynamics, as well as a slowly progressing change of forest condition.     

Estrogenic activity in sediments contaminated by nonylphenol in Tokyo Bay (Japan) evaluated by vitellogenin induction in male mummichogs (Fundulus heteroclitus)

Estrogenic activity was determined in sediments collected from Tokyo Bay. Sampling was performed at five stations including the site near the sewage treatment plant. The most estrogenic sediment collected near the sewage treatment plant was fractionated into ten fractions using normal-phase high-performance liquid chromatography. Chemical analysis was carried out for each fraction and nonylphenol (NP, 20,700 ng g⁻¹ dry wt) was detected at a higher concentration than estron (2.39 ng g⁻¹ dry wt) and 17β-estradiol (<0.7 ng g⁻¹ dry wt). Furthermore, each fraction was administered to male mummichogs (Fundulus heteroclitus), and vitellogenin (Vtg) was measured after two weeks. The induction of Vtg was observed; this estrogenic potency could be attributed to the NP content in this fraction. This is the first report to suggest that the high NP concentration in the sediments from Tokyo Bay has the potential to induce Vtg in wild fish.     

Chemistry and Sulfur Isotopes of the Chert-Clastic Sequence Surrounding the Kajika Massive Sulfide Ores at the Ashio Copper Mine, Ashio Terrane, Central Japan

Abstract. Chemical and sulfur isotopic compositions were obtained for a series of rocks within the chert‐clastic sequence surrounding the Kajika massive sulfide ore horizon at Shibukawasawa in the Ashio copper‐mining district, Ashio Terrane, central Japan. The sequence is lithologically classified into three units: chert, siliceous shale with basic volcanics, and sandstone‐shale, in ascending stratigraphic order. The Kajika ore horizon corresponds to the lowermost part of the unit that contains siliceous shale with basic volcanics. The rocks around the Kajika ore horizon are enriched in P₂O₅ (max. 0.22 %), Ba (max. 2400 ppm), Cu (595 ppm), V (323 ppm), Pb (168 ppm), Zn (124 ppm), and Mo (24 ppm) in siliceous shale; and Ba (4220 ppm), Zr (974 ppm), Cr (718 ppm), Ni (492 ppm), V (362 ppm), Zn (232 ppm), Nb (231 ppm), and Co (71 ppm) in the basic volcanics. The siliceous shale is enriched in a number of redox‐sensitive elements such as Cu, V, Pb, Zn, and Mo, which are known to be enriched in black shale and anoxic and hydrothermal sediments. The δ³⁴S values of sulfides in the chert and sandstone‐shale lie in the range of 0±2 %, and those in the siliceous shale range from ‐5 to ‐14 %. The measured δ³⁴S values in the basic volcanics are ‐0.3, ‐2.7, and ‐31.5 %. These heavier δ³⁴S signatures (around 0 %) recorded throughout the sequence indicate that the rocks formed under anoxic bottom‐water conditions. Slightly lighter δ³⁴S values recorded in siliceous shale might reflect significant mixing of sulfides that formed by sulfate‐reducing bacteria in an overlying oxic environment. The long‐term duration of anoxic conditions indicated by the heavier δ³⁴S signature is considered to have played an important role in protecting the Kajika sulfide ores from oxidative decomposition and preserving the ores in sedimentary accumulations.     

Borehole image analysis of the Nankai Accretionary Wedge, ODP Leg 196: Structural and stress studies

Electrical images recorded with Resistivity-At-Bit (RAB) from two sites drilled during Ocean Drilling Program (ODP) Leg 196 were analyzed to study the effects of subduction at the Nankai margin. For the first time in the history of scientific deep-sea drilling in ODP, in situ complete borehole images of the décollement zone were obtained. Analyses of all drilling-induced fracture data indicated that the maximum horizontal compressive stress (S_Hmax) axes have an azimuth of 303°, and analyses of breakout data from RAB images indicated an azimuth of 310°. These azimuths approximate the convergence direction of the Philippine Sea plate towards the Eurasian plate. The frontal thrust at Site 808 was encountered at about 389 mbsf. Density, porosity, resistivity, and gamma ray data change across the frontal thrust. The décollement zone at the deformation front was identified between 937 and 965 mbsf. The base of the décollement is sharply defined as the maximum extent of conductive fracturing and is marked by abrupt changes in physical properties [Mikada, H., Becker, K., Moore, J.C., Klaus, A., Austin, G.L., Bangs, N.L., Bourlange, S., Broilliard, J., Brückmann, W., Corn, E.R., Davis, E.E., Flemings, P.B., Goldberg, D.B., Gulick, S.S., Hansen, M.B., Hayward, N., Hills, D.J., Hunze, S., Ienaga, M., Ishiguro, H., Kinoshita, M., Macdonald, R.D., McNeill, L., Obana, S., Hong, O.S., Peacock, S., Pettigrew, T.L., Saito, S., Sawa, T., Thaiprasert, N., Tobin, H.J., Tsurumi, H., 2002. Proc. ODP, Initial Rep., 196, College Station, TX, (Ocean Drilling Program)]. The upper boundary of the décollement is marked by several sets of conductive fractures and by high variability in physical properties. The décollement zone is characterized by intense brittle fracturing. These fractures are considered to be the consequence of cyclic stresses and high fluid pressures in this zone. We analyzed fracture dips and their orientations at both sites and found that they are all consistent with a unique stress field model surrounding the two sites.     

Molecular dynamics study of the crystal structure and phase relation of the GeO2 polymorphs

A two-body interatomic potential model for GeO₂ polymorphs has been determined to simulate the structure change of them by semi-empirical procedure, total lattice energy minimization of GeO₂ polymorphs. Based on this potential, two polymorphs of GeO₂; α-quartz-type and rutile-type, have been reproduced using the molecular dynamics (MD) simulation techniques. Crystal structures, bulk moduli, volume thermal expansion coefficients and enthalpies of these polymorphs of GeO₂ were simulated. In spite of the simple form of the potential, these simulated structural values, bulk moduli and thermal expansivities are in excellent agreement with the reliable experimental data in respect to both polymorphs. Using this potential, MD simulation was further used to study the structural changes of GeO₂ under high pressure. We have investigated the pressure-induced amorphization. As reported in previous experimental studies, quartz-type GeO₂ undergoes pressure-induced crystalline-to-amorphous transformation at room temperature, the same as other quartz compounds; SiO₂, AlPO₄. Under hydrostatic compression, in this study, α-quartz-type GeO₂ transformed to a denser amorphous state at 7.4 GPa with change of the packing of oxygen ions and increase of germanium coordination. At higher pressure still, rutile-type GeO₂ transformed to a new phase of CaCl₂-type structure as a post-rutile candidate. Received: 29 July 1996 / Revised, accepted: 30 April 1997     

Eccentric instability of a two-dimensional fluid disc with a central massive object

In this paper we investigate, by linear modal analysis, the one-armed dynamical instability of a two-dimensional fluid disc that has a massive object at its centre. The model of the disc is chosen to avoid the artificial instabilities that originate from the unrealistic disc configurations that have been adopted in previous studies. We find a one-armed instability for which the central massive object is displaced from the centre, which is generally called the 'eccentric instability'. However, to excite the eccentric instability, the mass of the central object should be appreciably smaller than that of the disc, and this mass ratio is far smaller than what was originally proposed. The instability shown in this paper is likely to be excited in a stellar system with a central massive object, e.g. a galactic nucleus harbouring a massive black hole, and further studies are desirable via techniques such as numerical simulations.     

Computational model of the structural and elastic properties of the ilmenite and perovskite phases of MgSiO3

The structural and elastic properties of the ilmenite and perovskite phases of MgSiO₃ are investigated with a computational model based on energy minimization. The potential energies of these two crystals are approximated by the sum of Coulomb, van der Waals, and repulsion terms between atoms. Required energy parameters are derived by fitting the parameters to the observed crystal structures of these two phases as well as to the measured elastic constants of the ilmenite phase. The resulting potential model is applied to predicting the elastic constants of the perovskite phase. The calculated bulk modulus of the perovskite phase compares favorably with the data obtained from volume-compression experiments as well as the values estimated from empirical elasticity systematics of perovskite type compounds. The predicted shear modulus of the perovskite phase is also in reasonable agreement with the values proposed from similar empirical elasticity systematics. Subsequently, the model is used to simulate the high pressure behaviors of the crystal structures and elastic constants of these two phases.