Nonlinear surface ground analysis via statistical approach

A statistical approach is proposed for nonlinear surface ground analysis. In contrast to the conventional method which deals with only a single ground motion for equivalent linearization of soil properties, a design response spectrum defined at the upper level (bottom of the surface ground) of an engineering bedrock can be handled as the target design earthquake in the present paper. The effective shear strain in each soil layer is evaluated by means of a statistical procedure in which the mean peak shear strain is computed in terms of its standard deviation and the corresponding peak factor. The stiffness and damping ratio of each soil layer are obtained iteratively from the nonlinear relation of stiffness reduction factors and damping ratios with respect to the strain level. After the evaluation of the equivalent stiffness and damping ratio of every soil layer, the ground surface response spectrum is transformed from the design response spectrum defined at the upper level of the engineering bedrock via the one-dimensional wave propagation theory. The reliability and accuracy of the proposed analysis method is examined through the comparison with the results by the conventional method (represented by the program) for many simulated spectrum-compatible ground motions.     

Alteration processes recorded by back-arc mantle peridotites from oceanic core complexes,Shikoku Basin,Philippine Sea

We determined the mineralogical and petrological characteristics of ultramafic rocks dredged from two oceanic core complexes: the Mado Megamullion and 23°30′N non-transform offset massif, which are located within the Shikoku back-arc basin in the Philippine Sea. The ultramafic rocks are strongly serpentinized, but can be classified as harzburgite/lherzolite or dunite, based on relict primary minerals and their pseudomorphs. Strongly elongated pyroxene porphyroclasts with undulatory extinction indicate high-temperature (≥700 °C) strain localization on a detachment fault within the upper mantle at depths below the brittle–viscous transition. During exhumation, the peridotites underwent impregnation by magmatic or hydrothermal fluids, lizardite/chrysotile serpentinization at ≤300 °C, antigorite crystallization, and silica metasomatism that formed talc. These features indicate that the detachment fault zones formed a fluid pathway and facilitated a range of fluid–peridotite interactions.     

Effects of fixation and storage on flow cytometric analysis of marine bacteria

Flow cytometry (FCM) is now becoming a routine tool for the enumeration and optical characterization of bacteria in marine environments. We investigated the effects of sample fixation and storage upon flow cytometric determination of marine bacteria. Fixed and unfixed seawater samples were analyzed by FCM immediately aboard ship and/or later in the laboratory, and the appearances of the fluorescence signals and bacterial counts of these samples were compared. Fixation and storage led to the formation of multiple peaks in fluorescence histograms; this was also seen in 22 out of 36 samples frozen in liquid nitrogen. Fixation did not, but storage did induce a decrease of bacterial counts: a rapid decrease during the first 3 days followed by a slower decline. The decline of cell numbers in stored samples was expressed by a regression model. Our studies indicate that precaution is necessary when interpreting the data from fixed and/or stored marine bacterial samples analyzed by FCM. The possibility that the procedure of fixation and storage leads to the appearance of high DNA and low DNA bacterial groups should be considered.     

The 15 September 1991 pyroclastic flows at Unzen Volcano (Japan): a flow model for associated ash-cloud surges

Large-scale collapse of a dacite dome in the late afternoon of 15 September 1991 generated a series of pyroclastic-flow events at Unzen Volcano. Pyroclastic flows with a volume of 1×10⁶ m³ (as DRE) descended the northeastern slope of the volcano, changing their courses to the southeast due to topographic control. After they exited a narrow gorge, an ash-cloud surge rushed straight ahead, detaching the main body of the flow that turned and followed the topographic lows to the east. The surge swept the Kita-Kamikoba area, which had been devastated by the previous pyroclastic-flow events, and transported a car as far as 120 m. Following detachment, the surge lost its force after it moved several hundred meters, but maintained a high temperature. The deposits consist of a bottom layer of better-sorted ash (unit 1), a thick layer of block and ash (unit 2), and a thin top layer of fall-out ash (unit 3). Unit 2 overlies unit 1 with an erosional contact. The upper part of unit 2 grades into better-sorted ash. At distal block-and-ash flow deposits, the bottom part of unit 2 also consists of better-sorted ash, and the contact with the unit 1 deposits becomes ambiguous. Video footage of cascading pyroclastic flows during the 1991–1995 eruption, traveling over surfaces without any topographic barriers, revealed that lobes of ash cloud protruded intermittently from the moving head and sides, and that these lobes surged ahead on the ground surface. This fact, together with the inspection by helicopter shortly after the events, suggests that the protruded lobes consisted of better-sorted ash, and resulted in the deposits of unit 1. The highest ash-cloud plume at the Oshigadani valley exit, and the thickest deposition of fall-out ash over Kita-Kamikoba and Ohnokoba, indicate that abundant ash was also produced when the flow passed through a narrow gorge. In the model presented here, the ash clouds from the pyroclastic flows were composed of a basal turbulent current of high concentration (main body), an overriding and intermediate fluidization zone, and an overlying dilute cloud. Release of pressurized gas in lava block pores, due to collisions among blocks and the resulting upward current, caused a zone of fluidization just above the main body. The mixture of gas and ash sorted in the fluidization zone moved ahead and to the side of the main body as a gravitational current, where the ash was deposited as surge deposits. The main body, which had high internal friction and shear near its base, then overran the surge deposits, partially eroding them. When the upward current of gas (fluidization) waned, better-sorted ash suspended in the fluidization zone was deposited on block-and-ash deposits. In the distal places of block-and-ash deposits, unit 2 probably was deposited in non-turbulent fashion without any erosion of the underlying layer (unit 1).     

Availability of an equation to evaluate error by optical path discretization in radiative transfer computation based on the successive order of scattering method

The availability of an equation to evaluate the influence of multiple scattering in the single scattering process corresponding to a layer of arbitrary optical thickness was established. In order to confirm the validity of this equation, the radiance distribution in this layer was computed using a plane–parallel layer model based on the successive order of scattering method. The relative errors in a radiance distribution computed were evaluated as a function of optical thickness by the derived equation. It was shown that this equation provides a theoretical background for determining layer thickness using the plane–parallel layer model.     

Composition of liquids coexisting with spinel lherzolite at 10 kbar and the genesis of MORBs

Because of the controversy over the nature of the parental magma for MORBs, experiments have been performed at 10 kbar in order to assess the effect of modal variations in the source peridotite and the effect of temperature (degree of partial melting) on the composition of partial melts. A peridotite-basalt sandwich method was used and a run duration of 72 h was found to be necessary to equilibrate basalt and peridotite. A range of melt compositions, coexisting with olivine, orthopyroxene, clinopyroxene and spinel, was produced at 10 kbar, indicating that partial melting of peridotite cannot be regarded as isobarically pseudoinvariant. On projections in the normative tetrahedron OL-PL-CPX-SIL, the liquids obtained in this study define an area, rather than a point or narrow band. The compositions of some liquids in this study are similar to magnesian MORBs (MgO>9.5 wt%), providing evidence in support of the derivation of magnesian MORBs by partial melting of mantle lherzolite at about 10 kbar.     

Ecological variations in diatom assemblages in the Paleo-Kathmandu Lake linked with global and Indian monsoon climate changes for the last 600,000 years

Variations in fossil diatom assemblages and their relationship with global and Indian monsoon climate changes for the last 600,000 yr were investigated using a core of ancient lake (Paleo-Kathmandu Lake) sediments drilled at the Kathmandu Basin, Nepal Himalaya. Chronological scales of the core were constructed by tuning pollen wet and dry index records to the SPECMAP δ¹⁸O stack record. Examinations of biogenic silica contents and fossil diatom assemblages revealed that variations in productivity and compositions of diatom assemblages were closely linked with global and Indian monsoon climate changes on glacial and interglacial time scales. When summer monsoonal rainfall increased during interglacials (interstadials), diatom productivity increased because of increased inputs of terrestrial nutrients into the lake. When summer monsoonal rainfall reduced and/or winter monsoonal aridification enhanced during glacials (stadials), productivity of the diatoms decreased and lake-level falling brought about changes in compositions of diatom assemblages. Monospecific assemblages by unique Cyclotella kathmanduensis and Puncticulata versiformis appeared during about 590 to 390 ka. This might be attributed to evolutionary fine-tuning of diatom assemblages to specific lake environmental conditions. Additionally, low-amplitude precessional variations in monsoon climate and less lake-level changes may have also allowed both species to dominate over the long periods.     

Distribution of nitrous oxide dissolved in water masses in the eastern subtropical North Pacific and its origin inferred from isotopomer analysis

N₂O concentration and its isotopomer ratios were measured over a wide area from San Diego to Honolulu in the eastern subtropical North Pacific (ESNP). Waters in the study area had an N₂O maximum (38.2–50.5 nmol kg^?1) at 600–1000 m depth, which is similar to the profiles obtained previously in other areas in the North Pacific. We separated the seawater into five water masses (two for the surface layer, two for the middle layer, and one for the deep layer) and deduced N₂O production–consumption mechanisms in each water body by use of N₂O isotopomer ratios. The results showed that the mechanisms differ slightly among water masses. In the “coastal” surface layer, N₂O is produced by nitrification (NH₂OH oxidation). In the “open ocean” surface layer, it is produced mainly by nitrifier denitrification and to a lesser extent by nitrification under substrate-limited conditions. In both “upwelling” and “open ocean” middle layers it is produced mainly by denitrification and to a lesser extent by nitrifier denitrification. It is also partly reduced. In the deep layer, it is produced predominantly by denitrification with partial reduction. In this way, isotopomers aid elucidation of production–consumption mechanisms of N₂O in the sea even though the mechanisms cannot always be ascertained.     

Generalized Lyzenga's Predictor of Shallow Water Depth for Multispectral Satellite Imagery

Multispectral satellite remote sensing can predict shallow-water depth distribution inexpensively and exhaustively, but it requires many in situ measurements for calibration. To extend its feasibility, we improved a recently developed technique, for the first time, to obtain a generalized predictor of depth. We used six WorldView-2 images and obtained a predictor that yielded a 0.648 m root-mean-square error against a dataset with a 5.544 m standard deviation of depth. The predictor can be used with as few as two pixels with known depth per image, or with no depth data, if only relative depth is needed.