X-ray emission associated with gamma-ray bursts

The energy spectra of gamma-ray bursts differ from those of black-body radiation and are similar to the thermal bremsstrahlung spectra of optically thin plasma. This could be realized if the source is located in the outer atmosphere of a neutron star. In this case, almost one half of the emitted photons hit the surface of the star. The surface of the star is heated to a temperature of the order 10⁷ K, and a dominant flux of X-rays with a black-body spectrum would be expected. The X-rays produced by this mechanism are detectable in the energy range from a few keV to 10 keV. This model is discussed in relation to the recent observations in the X-ray region at the time of gamma-ray bursts, and modifications of this model are also presented. The observation in this energy range will bring us valuable information on the nature of gamma-ray burst sources.     

Microbial responses using denaturing gradient gel electrophoresis to oil and chemical dispersant in enclosed ecosystems

Microbial responses to the addition of oil with or without a chemical dispersant were examined in mesocosm and microcosm experiments by using denaturing gradient gel electrophoresis of bacterial ribosomal DNA and direct cell counting. When a water-soluble fraction of oil was added to seawater, increases in cell density were observed in the first 24h, followed by a decrease in abundance and a change in bacterial species composition. After addition of an oil-dispersant mixture, increases in cell density and changes in community structure coincided, and the amount of bacteria remained high. These phenomena also occurred in response to addition of only dispersant. Our results suggest that the chemical dispersant may be used as a nutrient source by some bacterial groups and may directly or indirectly prevent the growth of other bacterial groups.     

Spin rates of fast-rotating asteroids and fragments in impact disruption

We present a new experimental result of fragment spin-rate in impact disruption, using a thin glass plate. A cylindrical projectile impacts on a side (edge) of the plate. Dispersed fragments are observed using a high-speed camera and the spin rates of fragments are measured. We find that the measured fragment spin-rate decreases with increasing size. Assuming that the rotational energy of fragments is supplied from the residual stress, the spin rate ω decreases with increasing fragment size r as ω∼r−1, which explains the above experimental results. This size-dependence is similar to that of the observed spin rates of small fast-rotating asteroids. Our results suggest that spin rates of fragments of small asteroids immediately after disruption may have a similar size-dependence, and can provide constraints on the subsequent spin-state evolution of small asteroids due to thermal torques.     

A multiphysics and multiscale software environment for modeling astrophysical systems

We present MUSE, a software framework for combining existing computational tools for different astrophysical domains into a single multiphysics, multiscale application. MUSE facilitates the coupling of existing codes written in different languages by providing inter-language tools and by specifying an interface between each module and the framework that represents a balance between generality and computational efficiency. This approach allows scientists to use combinations of codes to solve highly coupled problems without the need to write new codes for other domains or significantly alter their existing codes. MUSE currently incorporates the domains of stellar dynamics, stellar evolution and stellar hydrodynamics for studying generalized stellar systems. We have now reached a “Noah’s Ark” milestone, with (at least) two available numerical solvers for each domain. MUSE can treat multiscale and multiphysics systems in which the time- and size-scales are well separated, like simulating the evolution of planetary systems, small stellar associations, dense stellar clusters, galaxies and galactic nuclei. In this paper we describe three examples calculated using MUSE: the merger of two galaxies, the merger of two evolving stars, and a hybrid N-body simulation. In addition, we demonstrate an implementation of MUSE on a distributed computer which may also include special-purpose hardware, such as GRAPEs or GPUs, to accelerate computations. The current MUSE code base is publicly available as open source at http://muse.li.     

Low-velocity collisions between centimeter-sized snowballs: Porosity dependence of coefficient of restitution for ice aggregates analogues in the Solar System

Understanding the collisional behavior of ice dust aggregates at low velocity is a key to determining the formation process of small icy bodies such as icy planetesimals, comets and icy satellites, and this collisional behavior is also closely related to the energy dissipation mechanism in Saturn’s rings. We performed head-on collision experiments in air by means of free-falling centimeter-sized sintered snowballs with porosities from 44% to 80% at impact velocities from 0.44 m s^?1 to 4.12 m s^?1 at ?10 °C. In cases of porosity larger than 70%, impact sticking was the dominant collision outcome, while bouncing was dominant at lower porosity. Coefficients of restitution of snow in this velocity range were found to depend strongly on the porosity rather than the impact velocity and to decrease with the increase of the porosity. We successfully measured the compaction volume of snowballs after the impact, and it enabled us to estimate the dynamic compressive strength of snow with the assumption of the energy conservation between kinetic energy and work for deformation, which was found to be consistent with the upper limit of static compressive strength. The velocity dependence of coefficients of restitution of snow was analyzed using a Johnson’s model, and a diagram for collision outcomes among equal-sized sintered snowballs was successfully drawn as a function of porosity and impact velocity.     

New Late Jurassic palaeomagnetic data from the northern Sichuan basin: implications for the deformation of the Yangtze craton

Upper Jurassic red sandstones and red siltstones were collected from 67 layers at 12 localities in the Penglaizhen formation. This formation is in the north of Bazhong county (31.8°N, 106.7°E) in the Sichuan basin, which is located in the northern part of the Yangtze craton. Thermal demagnetization isolated a high-temperature magnetic component with a maximum unblocking temperature of about 690 °C from 45 layers. The primary nature of the magnetization acquisition is ascertained through the presence of magnetostratigraphic sequences with normal and reversed polarities, as well as positive fold and reversal tests at the 95 per cent confidence level. The tilt-corrected mean direction of 36 layers is D = 20.0°, I = 28.8° with α ₉₅ = 5.8°. A Late Jurassic palaeomagentic pole at 64.7°N, 236.0°E with A ₉₅ = 7.0° is calculated from the palaeomagnetic directions of 11 localities. This pole position agrees with the two other Late Jurassic poles from the northern part of the Yangtze craton. A characteristic Late Jurassic pole is calculated from the three poles (68.6°N, 236.0°E with A ₉₅ = 8.0°) for the northern part of the Yangtze craton. This pole position is significantly different from that for the southern part of the Yangtze craton. This suggests that the southern part of the Yangtze craton was subjected to southward extrusion by 1700 ± 1000  km with respect to the northern part. Intracraton deformation occurred within the Yangtze craton.     

Removal of water‐surface reflection effects with a temporal minimum filter for UAV‐based shallow‐water photogrammetry

The recent development of structure‐from‐motion (SfM) and multi‐view stereo (MVS) photogrammetry techniques has enabled semi‐automatic high‐resolution bathymetry using aerial images taken by consumer‐grade digital cameras mounted on unmanned aerial vehicles (UAVs). However, the applicability of these techniques is sometimes limited by sun and sky reflections at the water surface, which render the point‐cloud density and accuracy insufficient. In this research, we present a new imaging technique to suppress the effect of these water‐surface reflections. In this technique, we order a drone to take a short video instead of a still picture at each waypoint. We then apply a temporal minimum filter to the video. This filter extracts the smallest RGB values in all the video frames for each pixel, and composes an image with greatly reduced reflection effects. To assess the performance of this technique, we applied it at three small shallow‐water sites. Specifically, we evaluated the effect of the technique on the point cloud density and the accuracy and precision of the photogrammetry. The results showed that the proposed technique achieved a far denser point cloud than the case in which a randomly chosen frame was used for each waypoint, and also showed better overall accuracy and precision in estimating water‐bottom elevation. The effectiveness of this new technique should depend on the surface wave state and sky radiance distribution, and this dependence, as well as the applicability to large areas, should be investigated in future research. Copyright © 2018 John Wiley & Sons, Ltd.     

New technologies and systems for high quality citrus fruit production,labor-saving and orchard construction in mountain areas of Japan

Novel technologies have been necessary for improving fruit quality and productivity of citrus,labor-saving and orchard conservation on steep slope lands since aging of growers and decrease in the number of successors is remarkable in mountain areas of southwestern Japan. The purpose of this paper is to introduce new technologies for improving citrus production that have been developed in recent years. A new fruit quality control system using drip irrigation and liquid fertilization technique combined with year-round plastic mulching was developed, and it enables high quality and stable citrus fruit production. Water and/or nutrient solution is automatically supplied through drip tubes that are laid under the mulching sheets to give adequate water stress, so as to improve sugar and acid content of fruit. A new transportation system for steep sloping citrus orchards, which is a combination of the monorail system and contour narrow paths, was suggested. A small walking cultivator was developed to explain the procedure of narrow path excavation. After introducing the narrow path, working hours for fertilizer and chemicalherbicide application were reduced. Disasterpr evention mapping of citrus orchards on slope landswas developed based on computer-aided seepage estimation and topographic data. The mapping can show zones of both ascending flow and descendingflow of underground water during heavy rains incitrus orchards. The mapping is considered to be effective for the management of orchards andprevention of erosion on slope lands.     

Response analysis of the Higashi–Kobe Bridge and surrounding soil in the 1995 Hyogoken–Nanbu Earthquake

This paper presents results of observation and analysis of the response of one of the longest cable-stayed bridges in the world to the Hyogoken–Nanbu (Kobe) Earthquake of 17 January 1995. It is determined that interaction of the foundations of the bridge towers with the supporting soil plays a decisive role in the overall structural behaviour. The key factor governing the changes of the soil properties at this site is pore-water pressure buildup, which results in liquefaction of the saturated surface soil layers under large dynamic loads. Models of the soil and structure are created and initially validated by accurately simulating the system response to a small earthquake. Soil parameters reflecting the pore-water pressure buildup in the strong earthquake are determined by an advanced non-linear effective stress analysis, combining the Ramberg–Osgood model of stress–strain dependence with a pore pressure model based on shear work concept. They are utilized to investigate and simulate the interaction of the foundation and the supporting soil using the program SASSI with the flexible volume substructuring approach. The results show a good agreement with the observations and have useful implications to the scientific and engineering practice. © 1998 John Wiley & Sons, Ltd.     

Mapping the change of coral reefs using remote sensing and in situ measurements: a case study in Pangkajene and Kepulauan Regency,Spermonde Archipelago,Indonesia

As elsewhere in Indonesia, local inhabitants in the Pangkajene and Kepulauan (PANGKEP) Regency, Spermonde Archipelago area and along the south-west coast of Sulawesi traditionally regard the coral reefs as their livelihood source. Since human activities as well as natural disturbances pose major threats to the coral reefs, these livelihoods may also be at risk. Currently, no comprehensive information on the status and condition of coral reefs in this area is available for this resource management. We determined the changes of coral reef habitat over a period of 20 years from 1994 to 2014 using a satellite Landsat multi-temporal image substantiated with in situ measurement data collected in 2014. The spectral value of coral reefs was extracted from multi-temporal Landsat imagery data, while the diffuse attenuation coefficient of water was obtained by using statistical analysis between the ratio of live coral cover and the spectral value of the visible bands. By using the unsupervised classification integrated with the data ground truth, it is stated that there has been a decline in live coral cover over a period of 20 years from 7716 ha in 1994 to 4236 ha in 2014, with a degradation rate of 174 ha/year. Based on the results, the ratio of the coral cover in the coral reef transects varied from the average of 24% for live corals to 96% for coral rubbles, implying the degraded status of coral reefs in the study area.